8561 WELCOME MAINT PERIODICAL SERVICES AND CERTAIN B R REPAIRS AT MINTSD MD OTM ACCN UNDER AGE BR II OF SOUTH PUNE

Amount

M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

M&L for complete removal of existing treatment on wall and applying two coat of white wash on wall complete all as speficied and directed.

M&L for preparation of old decorated surfaces of ceiling by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of oil bound distemper white or tinted complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper over a coat of alkali resistence primer, white or tinted on wall complete all as speficied and directed.

M&L for preparation of new plastered surfaces of walls by brooming down and scrapping whereever necessary and applying two coats of oil bound distemper white or tinted complete all as specified and directed.

M&L for complete removel of existing treatment of walls by scrapping, cleaning by water jet, soffits / facia of chajja / roof slab etc and applying two coats of Apex Ultima Weather shield paint of approved colour over a coat of primer etc. complete all as specified and directed. Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes/washout, contractor has to re-paint with Apex at his own cost.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint complete all as specified and directed.

M&L for cleaning of Manglore tile roof by scrapping, cleaning by water jet etc and applying two coat of Apex Ultima Weather shield paint or tinted over a coat of primer etc complete all as specified and directed. Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes/washout, contractor has to re-paint with Apex at his own cost.

M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exc. 10 cm width or girth and applying two coats of aluminium synthetic enamel paint complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler on old work with one or more coats complete all as specified and directed.

M&L for preparing old painted wooden surfaces of any description, n.exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description, n.exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted concrete or plastered surfaces exc. 10 cm width or girth and applying two coats of plastic emulsion paint on walls, complete all as specified and directed.

M&L for one coat of oil bound distemper on ceiling including preperation of old plaster surface complete all as specified and directed.

M& L for two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries and applying second coat of 0.5-1 mm thickness once the first coat is fully dried & set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be more than 2mm ,complete all as specified and directed.

M& L for One coat of wall care putty, level and smoothen the surface, apply the putty of 0.5-1 mm thickness complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of cement base paint complete all as specified and directed

M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying two coats of cement base paint complete all as specified and directed

M&L for writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, writing letters / numerical as directed by Engineer-in-Charge and fixing to building with screws 4 Nos. each, any height of Building upto 12m height, size of letter 80 x 125mm with max of 4 letters complete all as specified and as directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M 35 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for applying Asian paints Smart Care Damp proof Ultra on the wall, chajja, roof suface. The application method shall be followed with and including as appended below:- a) In the existing surface, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. b) Small cracks 3mm or less should be open out, cleaned & filled with AP smart care Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, channels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe. c) Apply self-priming coat (3 Part Asian paints Smart Care Damp proof Ultra and 1 Part Water) and Allow to dry for at least 3-4 hrs prior to application of subsequent coat. d) Apply two coats of Apex Ultima Weather shield paint.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old unserviceable AC sheet (corrugated or semi corrugated)/ PVC sheet in roofing including ridges etc complete all as specified & directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws including dismantling of old unserviceable AC sheet complete all as specified & directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including Dismantling wrought iron or mild steel iron of any description not otherwise provide for, complete all as specified & directed.

Dismantling timber scantlings, 40 Sqcm over in section in any position, fixed with nails unframed work, complete all as specified and directed.

Taking down chowkhat or frames wooden / steel exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames wooden / steel n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 3 Nos., MS cold rolld 100mm size butt hinges - 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 6 Nos., MS cold rolld 100mm size butt hinges - 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product drawing given on relevant page of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F stainless steel butt hinges medium weight 100mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

M&L for hasp & staple 100mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

S&F Aluminium handle cast type, anodised 150mm size, complete all as specified and directed.

S&F in repairs aluminium handle cast type, anodised 150mm size, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.

M&L for prepration of new or prreviously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass, one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20957 (b) Top frame & Verrtical 20958 (c) Handle (side) 20606 (d) Shutter inter lock 20605 (e) Shutter top & Bottom 20604 (f) Glazing Clip 19352

S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and directed :- Two track bottom – 20957, two track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge (a) Frame - 20048 (b) Glazing clip - 19352

S&F sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square n.exc. 0.50 sqm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed by Engineer- in-charge.

S & F frosted/figured glass pin head type, 3 mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed by Engineer- in-charge.

S & F aluminium anodised powder coated of ivory/brown colour frame / shutters for windows / doors / Ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

S&F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle, 5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick laminated particle board as bottom pannel both side laminated using following sections as given in 'JINDAL' catelogue complete all as specified and as directed:- (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed.

M & L for water proofing treatment to sunken slab, walls, etc. shall be carried out as specified below and as directed by Engineer-in-Charge:- (a) Dismantling & remove the existing lean concrete completely and clean the sunken portion of toilet / Baths / WCs / Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor by using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalent). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or equivalent. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or equivalent on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet and applying second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or equivalent to be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen, floor, tiling work (floor and dado) to be carried out by using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. Note: Lean concrete 1:5:10 type E-2 shall be measured and paid separately under respective item of BOQ.

M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling sunken portion, complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor, complete all as specified and directed.

M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) including demolition of old tiles of any description or thickness laid bedded and pointed in any mortar and removing of debries outside MD land etc complete all as specified and directed by Engineer-in-Charge.

M&L for coloured vitrified ceramic tiles 8 to 9mm thick of size 600 x 600mm of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, with and including 15mm thick screed bed in CM (1:6) including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc and removing of debries outside MD land complete all as specified and as directed.

M&L for coloured vitrified ceramic tiles 10mm thick of size 600 x 1200mm of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, with and including 15mm thick screed bed in CM (1:6) including demolition of old tiles of any description or thickness laid bedded and pointed in any mortar etc and removing of debries outside MD land complete all as specified and as directed.

M&L for glazed colour ceramic tiles of size 300mm x600mm x 7 to 8mm thick on walls / vertical surfaces, laid over and including 10 mm thick CM 1:4 backing coat with and including triangular filletting in CM 1:4 on top edges, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including demolition of old tiles of any description or thickness laid bedded and pointed in any mortar etc and removing of debries outside MD land complete all as specified and as directed.

M&L for 25 mm thick concrete type B0 1:2:4 using 12.50 mm graded stone aggregate as in floor leveling course etc. including demolition of existing cement concrete, complete all as specified and directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 10 mm thick backing coat in CM 1:4 including dismantling of existing old unserviceable stone slabs and tiles of any description or thickness, and removing of debries outside MD land complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1 : 3) laid over and including 15 mm thick screed bed in CM 1:4 including dismantling of old unserviceable stone slabs and tiles of any description or thickness, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for chequrred cement concrete tiles 30cm x 30cm x 20mm thick glossy finish, set jointed and pointed in neat cement slurry in floor with grey cement and pigment laid over and including 20mm thick screed bed in CM 1:4 including dismantling of old unserviceable stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, and removing of debries outside MD land complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling of old unserviceable water tanks and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling of old unserviceable water tanks and removing to store complete all as specified and directed.

M & L Mirror polished kota stone slab flooring 20-25 mm thick, laid over and including 20 mm thick screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing complete including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and directed.

Ditto all as per item No. 75 above but as in riser of steps, skirting, dado and pillars etc., complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick / concrete surfaces with sagol finish, complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick / concrete surfaces with sagol finish, including taking down old unserviceable cement plaster complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair faces of brick/concrete, surfaces sponge finish, complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), including dismentling of brick work or stone / boulder / PCC block masonary, built in cement mortar complete all as specified and directed.

S&F in repairs 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards / Kitchen cupboard / Pelmets with teak beading of all sides fixed complete all as specified and directed.

M&L for 2nd class hard wood as in fillets exc. 13 sqcm and n. exc. 25 Sqcm in section, square or rectangular, wrought and fixed with nails, complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished., complete all as specified and directed.

S & F Magnetic door catches suitable for cupboard / cabinet etc complete all as specified and as directed.

S& F in repair PVC cabinet with looking mirror, single shutter of size 450X555X124mm as per sample, make –Nilkamal / Prayag / Commander complete all as specified and directed

Supplying, fixing, jointing and testing galvanised iron tubing medium grade including with all fitting & fixtures such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old unserviceable GI water tubing complete all as specified and as directed for the following sizes:- (a). 15mm bore.

(b). 20mm bore

(c). 25mm bore

S&F in repair chromium plated, fancy type, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed

S&F in repairs 2-way bib cock with wall flange, CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed. Make : CERA Product code F2013163 or Jaquar / PARRYWARE / Hindware

S&F in repair toughened glass corner glass shelf 300 x 300 mm (12'' x 12'') with stainless steel brackets and railing complete all as specified and as directed. Make : CERA Cat No F5005103 or equivalent in Jaquar/Kohler

S&F Single lever Basin Mixer without popup waste with 600mm long Braided Hoses complete all as specified and directed. Make : Jaquar Product code OPP-15005BPM or equivalent model in Kohler / Parryware

S&F Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings etc complete all as specified and as directed. Make : Jaquar of cat no SLS-WHT-6851S110PP or equivalent model in Kohler / Parryware

S&F in repairs Health faucet ABS body with 1.0mtr SS braided connection pipe complete all as specified & directed. Make CERA Product code F830105AB or equivalent model in PARRYWARE/ Hindware

S&F in repairs Soap dish confirming to CAT No ACN-WHM-1131N of "Jaquar" or Equivalent cat part in Kohler / CERA, complete all as specified and as directed

S&F in repairs Hand Shower( Health faucet) with 1.00mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make:- Jaquar Product code ALD-CHR-565 or equivalent model in Kohler / CERA

S&F in repair brass 15mm bore CP Wall mixer fancy type, suitable for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F in repairs counter top basin of Size 570x420x195mm complete all as specified & directed. Make : Jaquar Product code FLS-WHT-5601 or equivalent model in Kohler / PArryware by GE

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP including 15mm bore pillar tap, chromium plated, fancy type etc all as specified and directed.

S&F in repair plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed. Make : CERA / PARRYWARE / PRAYAG

S&F in repairs waste fitting (coupling) brass chromium plated 32 mm dia suitable for WHB complete all as specified and directed

S&F in repairs door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

S&F in repairs barss chromium plated papper toilet holder, complete all as specified and directed

S&F towel ring confirming to CAT No F5014115CH of CERA or Equivalent make in Jaquar / PARRYWARE / Hindware, complete all as specified and directed

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose long body, 125mm size, fancy type, complete all as specified and directed.

S & F in repairs 15 mm bore stop valve concealed brass chromium plated cast copper alloy screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F in repairs 15 mm bore stop valve brass chromium plated cast copper alloy screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S&F in repair stainless steel grating of 75 to 100 mm dia suitable for nahani trap complete all as specified and directed.

Supply and fixing in repairs pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Dismantling of walls/ceiling boards(fibre, pulp, insulation, etc) or insulation boards/ slabs / blankets, any thickness including cover fillets etc, complete all as specified and directed.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. Note-1 : Design and pattern of ceiling will be as approved by Engineer-in-Charge

S&F 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) complete all as specified and directed. Note-1 : Cost of making framework for light fittings/ grills/ diffusers and cutting to shape in ceiling etc shall be deemed to be included in unit quoted rate of this item

M & L for Makrana white Marble work 18 to 20mm thick (table rubbed and polished) as in floor, steps, jambs, pillars, window cills, cooking platforms and like including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15mm thick screed bed in CM 1:4 including dismantling of old unserviceable stone slabs or tiles of any description or thickness complete all as specified and directed

M&L for providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate, set in CM 1:4 as in jallies, 25mm thick (Measured solid) incliding mouldings, complete all as specified and directed.

Supply and fix in repairs, stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent make as mentioned here-in-after, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or laid under floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc, complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc, complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 25 mm bore, medium weight, complete all as specified and as directed.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs roof tiles mangalore pattern inter locking at side joints laid dry etc, including dismantling of old unserviceable mangalore pattern tiles complete all as specified and directed.

S&F in repairs ridge tile or hip tiles suitable for mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc, including dismantling of old unserviceable ridge complete all as specified and directed.

S & F vitreous china urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe etc., complete all as specified and directed.

M&L for vitreous china urinals URS-WHT-132530 of Jaquar with fixing accessories complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing auto closing concealed urinal flush valve PRS-CHR-073 of Jaquar, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F 150x150mm size salt glazed stone ware gully trap, square or round mounthed, 'P' type, including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, compleete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth including taking down of old unserviceable pipes, complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth including taking down of old unserviceable pipes, complete all as specified and directed.

Taking down steel shutter of size n. exc 0.50 sqm by cutting by welding,chieselig etc and making good the disturbed portion complete all as specified and as directed.

S&F in repairs PVC (SWR), 75mm bore junction with access door, single (Single Tee), equal or unequal, complete all as specified & directed.

S&F in repairs PVC (SWR), 110mm bore junction with access door, single (Single Tee), equal or unequal, complete all as specified & directed.

S&F in repairs 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F in repairs PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F in repairs PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

M/s.BAJRANG CONSTRUCTION

Crown Chemicals