PROVN OF 04 NOS OF SUMPS SIZE 1.2M x 1.2M DEEP ALONGWITH SUCTION SUBMERSIBLE PUMP ALONGWITH 02 NOS RCC RECHARGE WELLS 3.5M DIA AND 9M DEEP AT KLP ANUPGARH UNDER GE (AF) SURATGARH

Amount

Excavation over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

As per Srl item No 1.00, but exc 1.5 m and n exc 3 m complete all as specified and as directed.

As per Srl item No 1.00, but exc 3 m and n exc 4.50 m complete all as specified and as directed.

As per Srl item No 1.00, but exc 4.50 m and n exc 6 m complete all as specified and as directed.

As per Srl item No 1.00, but exc 6 m and n exc 7.50 m complete all as specified and as directed.

As per Srl item No 1.00, but exc 7.50 m and n exc 9 m complete all as specified and as directed.

As per Srl item No 1.00, but exc 9 m and n exc 9.85 m complete all as specified and as directed.

Excavation in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Excavation in trenches in soft/loose soil, n exc 1.5 m wide and exc 1.5 m but n exc 3 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 sqm on plan and getting out complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as per specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and deposting where directed complete all as specified and as directed.

Material and labour for RCC M-25 (Design Mix) in Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

Material and labour for RCC M 25 (Design Mix) in Foundations, including rafts, footings, foundation beams: plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour for RCC M 25 (Design Mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railling and similar work including attached pillasters, buttresses, etc; vertical or to better curved in plan complete all as specified and as directed.

Supply only for Boulders 7 cm to 15 cm dia complete all as specified and as directed.

Material and labour for Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and as directed.

Supply and fixing of 110 mm dia PVC (SWR) pipes singles socketed, in any length with rubber ring joints laid in treches or in floors complete all as specified and as directed.

Material and labour for cement concrete in founations, filling and mass concrete 1:4:8 Type D2 complete all as specified and as directed.

Material and labour for Brickwork with subclass 'B' bricks straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and as directed.

Material and labour for Cement concrete 1:2:4 Type B2 in surface channels and drains complete all as specified and as directed.

Material and labour for Providing, precast cement concrete 1:2:4 Type B1 in Cover slab. Setting in mortar complete with joints to match complete all as specified and as directed.

Material and labour for PCC 1:2:4, in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed by Engineer-in-charge.

Material and labour for Rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Material and labour for Concrete bed to drain pipes of 300 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2 complete all as specified and as directed.

Material and labour for Concrete bed to drain pipes of 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2 complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 300 mm dia complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 150 mm dia complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cuting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for removing existing branch drain, making good to walling and redering, cutting out branch channel, and making good benchings complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Supply and fixing of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-290 (Gde E-165) complete all as specified and as directed.

Expanded metal n exc 4 Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and priming with red oxide along with two coats of synthentic enamel paint complete all as specified and as directed.

Supply, installation, testing and commissioning of submersible monoblock pump sets of 1 HP capacity single phase 240 V AC power supply with suitable size TEFC induction motor sync speed 3000 RPM consisting of 25 mm x 25 mm suction and discharge dia respectevely complete all as specified and as directed. Make: Crompton Cat Part No MAD12 (1PH)J-33 or equivalent in Kirloskar BEACON/KSB/CRI/MATHER & PLATT/GARANDFOS

Supply and fixing in replacement of DOL starter AC single phase 240 volt, 50 Hz with sheet metal enclosure type suitable for 01 HP motor including making connection compete all as specified and as directed. Make: L&T Model: MU 2P Cat Part No CS90319KOVO or equivalent in Schneider, siemens C&S Electric, ABB.

Supply and fixing PVC insulated & PVC sheathed industrial cable for submersible pump motors flat two core of nominal area of conductor 6 Sqmm 1100 volts confirming to IS 694 complete all as specified and as directed. Make: Havells/PLAZA/Ploycab

Supply and fixing tubes "medium grade" galvanised 25 mm dia ISI marked as per IS 1239 part-I with all fitting ISI marked including cutting threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line complete all as specified and directed

Material and labour for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc. including necessary form work and finishing the surface with cement mortar 1:4, 5 mm thick finished to the portion of PCC muffs abaoave ground level complete all as specified and directed

Supply and fix Cast Iron/Ductile iron fittings for spigot and socket pipes up to 150 mm bore such as bends (any type, radius and angle) tapers, any type (straight bend increasing, decreasing or double socket etc) Tee pieces, single branch 'Y' junction double branch, cross collars caps and plug complete all as specified and directed by Engineer-in-Charge

Supply and fix LT Busbar 3.15mm thick CRCA sheet box with 01 incoming (current carrying capacity upto 40 A) and 04 outgoing (current carrying capacity upto 10 A) with a common neutral bus bar properly grouted in ground with PCC foundation complete all as specified and directed by Engineer-in-Charge.

Supply and laying XLPE insulated, screened PVC bedded galvanized steel strip or wire armoured, electric power cables with stranded aluminum conductor, 1100 volts grade (earthed) cross sectional area 25 sqmm 3.5 core, laid in trenches, through pipe in road crossing, ducts, fixed along ploes complete all as specified and as directed by Engineer-in-Charge.

Supply and laying XLPE insulated, screened PVC bedded galvanized steel strip or wire armoured, electric power cables with stranded aluminum conductor, 1100 volts grade (earthed) cross sectional area 16 sqmm 2 core, laid in trenches, through pipe in road crossing, ducts, fixed along ploes complete all as specified and as directed by Engineer-in-Charge.

RAM CHANDER CONTRACTOR

CAPITAL CONTRACTOR AND SUPPLIER

M/S Shree Ram Enterprises