PROVISION OF WALL WITH GRANITE AT THE ENTRANCE OF GATE AT 402 LT AD BTY COMP AND SPECIAL REPAIRS REPLACEMENT OF OLD DETERIORATED DBS AND POINT WIRING WITH CONNECTED ITEMS AT ARMY AD CENTRE UNDER GE I GOS

M&L for Excavating in trenches in soft/ loose soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation, n exc 10 sqm in plan and getting out , complete all as specified and directed.

M&L for Excavating in trenches in soft/ loose soil, not exceeding 1.5m wide and exceeding 1.5 m in depth for foundation, n exc 10 sqm in plan and getting out complete all as specified and directed.

M&L for Cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in chajja and the like complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions (sqaure, rectangular or polygon) with fair finished surfaces complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Flat, with fair finished surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M & L for sub main wiring complete with 2 run of 1.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and , complete all as specified and directed. Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 1.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply, Laying and testing cable XLPE insulated ,screened, PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty ) 1100 volts grade with stranded aluminium conductor of size 6.0 sq.mm. 2 core , complete all as specified and directed.

Supply only cable junction box weather & fire proof outdoor type installation of approved size, hinged /screwed type made of SMC plastic single door with incoming and outgoing connectors/ terminals suitable for 6 to 16 sqmm cable complete all as specified and directed .

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and complete all as specified and directed.

Material and labour for GI pipe 40 mm dia "light grade " complete with all fittings laid in trenches,road/culvert crossing,on wall, floors,on roof,on pole, for cable protection complete all as specified and directed

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Material and labour for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) for making good of road cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without undulations complete all as specified and directed.( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per schedule of credit materials against contract agreement).

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

Each Job

Material and labour for point wiring and incl circuit wiring from distribution board to control switch boardwith 1.5 sqmm PVC insulated wires, FRLSH type complete incl suitable , ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 25 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed/surface(as per site) in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.20mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with 3mm putty and necessary distamber for smooth finishing complete all as specified and directed for One light point controlled by one 10 Amps switch one way. (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height/places(incl stone bldgs) it shall be deemed in to included in quoted rate only.)

All as per item no. 33 but for One fan point controlled by one 10 Amps switch and one regulator.

All as per item no. 33 but for One exhaust fan point controlled by one 10 amps switch .

All as per item no. 33 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item no. 33 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on same board .

All as per item no. 33 but for One bell/buzzer point controlled by one bell push.

All as per item no. 33 but for One light point controlled by two 2 way switches/bed switch point

All as per item No.33 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on independent board.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type bell push 10 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240Volts, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality, ISI marked, as approved type complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

All as per item no. 40 but for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.33 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fix decorative box type 20 watt light fitting industrial regal/ Endura batten, end caps, pre-wired incl fixing arrangements/accessories and including providing single/double side LED tube light (tube rod) white/warm 20 watt-01 No made of aluminium extrusion with high efficient LED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply & fix decorative box type 2x22 watt light fitting streak batten, end caps, pre-wired and including providing single/double side LED tube light (tube rod) white/warm 20 watt-02 No made of aluminium extrusion with high efficient LED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply and fixing 20 watts LED Austra mirror smart light fitting one feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing sleek surface rugged stylish metal surface mounted down lighter suitable for different open ceiling indoor applications of 15 watt LED with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing sleek surface rugged stylish metal surface mounted down lighter suitable for different open ceiling indoor applications of 18/20 watt LED with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing sleek surface rugged stylish metal surface mounted down lighter suitable for different open ceiling indoor applications of 24 watt LED with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing down lighter 40 W LED fitting completely environmental friendly,energy saving long life corrosion resistant,pressure die-cast aluminium housing and control gear compartment well glass luminaires with LED as light source with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing 12 watt LED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified .

Supply and fixing 15 watt LED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified .

Supply and fixed in repairs LED bldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.

Supply and fixed in repairs surface/recess mounting 2'x2' LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Note:- Old LED 2'x2' lights deposited in MES store yard for safe custody.

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and

directed.

Supply and fix GI bracket pipe suitable for above light fitting size 32 to 40 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs as light source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 60-70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing and sheet metal enclosure with acrylic door type, DD/AD ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

All as per ditto item No .77, but 2 run x 6 sqmm+1 run 6Sqmm earth wire complete all as specified and directed.

M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia in concealed ISI marked medium grade(MMS) ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed.

Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 16 way for flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed.

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

All as per ditto item No .77, but 2 run x 10 sqmm+1 run 10 Sqmm earth wire complete all as specified and directed.

All as per ditto item No 77, but 2 run x 4 sqmm+1 run 4Sqmm earth wire complete all as specified and directed.

All as per ditto item No 77, but 2 run x 2.5 sqmm+1 run 2.5Sqmm earth wire complete all as specified and directed.

Supply & fix and MCB TPN 40 to 63 Amps 10 KA,"C" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.

Supply and fix MCCB, 125 Amps,4 pole,415 Volts , 16/18/35KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 63 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 100-125 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 160 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 200 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 250 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 315 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Takig out old unserviceable earthings of any type from existing locations and including providing material and labour for copper earthing complete with copper earth plate elctrode sie 60cm x60cmx 3 mm thick buried directely in ground vertically earth pit not less than 2.25 metres deep below ground level with top edge of plate not less than 1.5 metres below ground level, connected to and including pure copper earth strip of size 20 X 3 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of copper bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I & as per IS-3043 and GI watering pipe of 32 mm dia medium grade,copper funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

M& L for in repair earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn inconduit pipe or fixed to poles or any other indicated situation for loop earthing etc as required copper earth strip of size 20x3 mm size for earthing connectivity conductor incl providing suitable heavy duty insulators,nuts,bolts and screws etc with insulators for three number in each running metre complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge

of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

M&L for test point termiation block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos. 8 mm long hex. Head screws and including providing thermoplastic box of size 217 mm X 253 mm X115 mm(L X B X H)confirming to IP -65 with transparent lid hinged door, mounting plate,DIN rail with fastening screws and other necessary accessories complete all as specified and directed.

M& L for in repair earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn inconduit pipe or fixed to poles or any other indicated situation for loop earthing etc as required galvanised iron steel earth strip of size 25x4 mm size for earthing connectivity conductor incl providing suitable heavy duty insulators,nuts,bolts and screws etc with insulators for three number in each running metre complete all as specified and directed.

Supply and fix PVC conduit/casing of size not less than 25X25 mm or 25-32 mm dia(as per site reqt) width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,TV Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fix PVC conduit/ casing and caping of size not less than 50X50 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

S&F for PVC non-metalic rigid conduit 25-32 MM dia incl looping boxes,junctions boxes 1 to 4 way & terminals and incl providing all types accessories such as tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked for LAN,telephone and TV connections cables including tiles cutting,chasses and making good disturbed surfaces to match with existing colour tiles surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Taking out old unsv existing on load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 400 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Taking out old unsv existing o

n load change over any type/rating and incl providing supply and fix on load change over switch 415V in sheet metal enclosure/open excution type/side handle as per site requiremet 4 pole of capacity 630 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.

Supply and fixing sheet steel enclosure in CRCA sheet with suitable for MCCB100Amps to 160Amps,4pole,415Volts,16/18KA MCCB and including providing necessary nut,bolts and washers and fixed in wall concealed/surface as site conditon complete all as specified and directed.

Supply and fix air circulator heavy duty turbo force wall mounted,metal body type fan 230Volts single phase oscillating 450 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed.M

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,2 core including providing lugs,glands,nuts,bolts and washers complete all as specified and directed.

Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,4 core including providing lugs,glands,nuts,bolts and washers complete all as specified and directed.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.

Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.

M&L for rendering 15mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new plastered of wall/ceiling or concrete surface of walls or concrete and applying two coats of 3 mm thick wall care putty complete all as specified and directed

Taking down old usv item from existing location and including Supply and fixing sheet steel enclosure in CRCA sheet suitable for MCCB100Amps ,4pole,415Volts,16/18KA MCCB and including providing necessary nut,bolts and washers and fixed in wall concealed/surface as site conditon complete all as specified and directed.

M&L for preparation of old decorated surface of wall and apply two coats of white wash complete all as specified and directed

Supply and fixed in repairs modular switch 1 way,10Amps,1module,240V, ISI Marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular switch 1 way,16Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular type socket shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs modular switch 2 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular type step fan speed regulator 100/120 W, 2 module,230volts,AC, 360 degree rotation ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs modular bell push 1 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular metal flush box 3 module ,ISI marked, and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular metal flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular metal flush box 6 to 18 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular white cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular white cover plate with frame 2 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular white cover plate with frame 3 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular white cover plate with frame 4/5 module ,ISI marked as per site rqmnt and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular white cover plate with frame 6 module incl ,ISI marked and suitable