Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹26.8 Laccepted-aoc | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹40,400
Closing Date
2 Jul 2026, 9:30 pmClosed
Public Works Department
EXECUTIVE ENGINEER
Providing External Housekeeping, in the office premises and vehicleparking area, providing repairs to the toilets (Plumbing and sanitary) and urgent repairs to the office room at office of the Superintending Engineer PWD Circle, Office of the Chief Engineer,WRDO, Office of the Assistant Executive Engineer, QC Assurance Sub-Division at Ananda Rao Circle Bangalore from 01-08-2026 to 30-09-2027 (Reserved for CAT-II(A)
PWD/2026-27/BD/WORK_INDENT36905
PWD/2026-27/BD/WORK_INDENT36905
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
₹1,010
₹40,400
2 Jul 2026
24 Jun 2026
3 Jul 2026
29 Jun 2026
Providing External Housekeeping, in the office premises and vehicleparking area, providing repairs to the toilets (Plumbing and sanitary) and urgent repairs to the office room at office of the Superintending Engineer PWD Circle, Office of the Chief Engineer,WRDO, Office of the Assistant Executive Engineer, QC Assurance Sub-Division at Ananda Rao Circle Bangalore from 01-08-2026 to 30-09-2027
External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut ...
Cleaning Quadrangle chajjas including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, bo...
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plat- ing and fixing with necessary screws etc., complete. Nickel plated mild steel piano hinges 1 mm thick 65 mm wide
Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Removing serviceable Glass of any description from old wood or metal frames ( any thickness or size, quality or description ) hacking out old putty etc., including risk and making good breakages in ta...
Repairing and fixing shutters (panelled or glazed) to doors, windows,
ventilators and cupboards.
Providing & fixing Glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick Glass panes including cost of materials, labour, usa...
Repairing door and window frames with available wood to the required
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank a...
Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist f...
Toilets Tile Joints (Repair) - Providing and grouting tile joints, Cutting the tile joints with the help of cutting machine (width 3mm-15mm) and filling with of matching shade, using three component E...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and fixing PTMT grating of approved quality and colour.- Circular type - 125 mm nominal dia
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete. Flexible pipe : 32 mm dia
Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 15 mm nominal bore
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing
not less than 85 g
Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 122mm long, weighing not less than 99 g
Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 25 mm nominal bore - Horizontal
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...
Cleaning of sewer line by Rodding Equipment for dia above 150 mm.(While cleaning septic tank all safety and precautionary measures to be taken,Standard Operating Procedure to be adopted and PEMSR Act ...
Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment an...
Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Carpenter Class I
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2 36905 RESERVED.doc
Tender Document • 1.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .