Improvement/Beautification and repair of bank of Pond Kh. No. 98 at village Shikarpur in Matiala Assembly Constituency-34.

Supply of earth including royaltyexcavation, loading, unloading and carriage by mechanical transport and banking the same in layer not exceeding 20cm in depth breaking clods watering rolling each layer with ½ tone roller or wooden or steel rammersand dressing up in embankment for roads, flood banks, marginal banks and guide banks or filling up ground depressions with all lead & lifts in all kind of soil.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone

Supplying of fixing of garden bench (Victorian) both sides of garden bench are made of flora cast iron having back height of minimum 700mm and minimum seating height of 375mm and both sides of garden bench is connected with MS tube of 65mm x 25mm sheet angular tube having width of 15-20mm in 10 nos. for seating purpose with extra support 25mmx5mm M.S. flat for extra stability all sharp and rough edges of bench are to be grinded with grinder and all fill up with M seal where it is required necessary. This bench is having the provision of hold fast system of for growing bench is complete with a cutting of Ist class Red oxide and with two coat of synthetic enamel of Ist class quality paint. Finally bench is assembled with nuts and bolts including all tax. The length of bench be 1500 mm and minimum overall weight not less than 90kgs. The name of Hon'ble MLA & Constituency name is to be written on each bench with synthetic enamel paint.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Supply & Fixing of Multiplay System HPS-MPS-506: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness. Upright structural posts of height 2.3 m, 2.6 mand 3.2 m are to be schedule Galvanized steel with a 114 mm OD. All the posts are to be finished with a baked on powder coat finish. Powder coatings used TGIC Polyester powder. Electro -statically applied polyester powder musthave a tough finish with maximum durability. The pre treatment and curing process includes Acid wash > freshwater rinse > iron phosphate rinse > final rinse > rust prevention treatment >seal & dry-off > oven baked electro-static powder application and dual zone curing in the oven > QC Controls > Final finish. Finished products have the following typical characteristics: 0.5mm thickness, oven cured between 191oCand 220oC, to achieve Flexibility, Impact, Salt Spray {Corrosion} Resistance, Hardness, and Adhesion. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Deck of size 1.16 mx 1.16 m and Staircase of size 1.0 m x 0.60m shall be an all-PATENT welded assembly fabricated from perforated solid punched steel. Handrail of height 1.88m and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish. Snake Climber, Piped walls of size 2.14 m shall be an all patent welded fabricated from 32 O.D. galvanized steel pipes for the outer pipes and 25 mm O.D. galvanized steel for the inner parallel bars with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304. Roof of size 1.47 m x 1.47 m x 0.96 m, WaveySlide of size 2.38m x 0.55m x 1.20m, Panels, Plastic Components [super thick plastic] shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with “color molded” in not “added in”. Top rails Of Monkey Bar of size 2.32m x 1.0mand Swing of size 2.55 m x 1.16m shall be fabricated from 32mm O.D. galvanized steel pipe with a baked on powder coating finish. Finished products have the following typical characteristics: 0.5mm thickness, oven cured between 191oC and 220oC, flexibility, Impact, Salt Spray resistance, Hardness, and Adhesion. Play Equipment Dimensions : 7.44 m x 4.03 m x 3.81 m