Development and Beautification of PDA Garden at Porvorim Balance work

Amount

Civil Work

Felling trees of girth(measured at a height of 1. Mt. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leadsa)Beyond 30 cm and upto 60 cm grith

Felling trees of girth(measured at a height of 1. Mt. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leadsa)Beyond 60 cm and upto 120 cm grith

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.All types of Ordinary rock including all types of laterite rock, blasting prohibited

Half brick masonry in cement mortar 1:3 (1 cement : 3 coarse sand) with brick of class designation 75 Kg/cm2 in foundation and plinth

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.a)sand

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.b)moorum

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Providing and laying plum concrete in cement concrete 1:2: 4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 mm nominal size) with plums not exceeding 15% of the volumne of the finished concrete of size ranging from 150 to 300 mm (but the maximum dimension not exceeding 1/3rd (one third) the least dimension of member under consideration excluding the cost of centering and shuttering:walls including attached buttresses pilasters,string courses,independent piers,columns and pillasters coping and the like upto floor five level

Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level:M-25 grade of concrete

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Centering & shuttering including Strutting, Propping & removal of forms for:Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Providing corrosion resistant steel CRS-50 bars of (SAIL,TATA. VAZAG only )(Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member .

Steel work welded ( SAIL, TATA ,VIZAG & using electrodes of AdOr make only )in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. In tees, angles, flats and channels

Providing and laying as per approved drawing 60mm thick factory made Florencia paver blocks of Basant make or its equivalent made of M30 grade ,of approved colour & quality in floors made by heavy duty block making machine with strong vibratory compaction using 3 ton roller and laid in 50 mm thick compacted bed of course sand/quarry dust powder, filling the joints with coarse sand, etc. all complete as per the direction of Engineer in charge (Colour & quality of the paver will be approved by the Architect - in - charge)

Proving, fixing and installation of Cement pots of 0.25 m dia by 0.25 dia ht and 0.50 m dia by 0.50 dia ht with 20mm dia hole on the base to be placed in a pattern given by the architect incharge which includes arranging the pots in inverted pattern in a give sequence on a steel rod of 12mm dia , including painting the pots with required shade of primer & paint including all labour, other fiitings & fixtures etc complete as directed by the Engineer in Charge

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete MAPS T01

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete MAPS T14

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGKD 08

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGKD 11

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGKD 39

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGKD 38

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGKD 36

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGKD 20

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGSS 07

Supplying at fixing at the site of work the following play equipments of Arihant make or its equivalent including transporting to the same to the site of work and placing in position as directed by the engineer in chargge including the cost of Transportation and labour etc all complete PGSS 01

Providing and placing Rock climbing structure 4' x 4' real rock textured panels with 6/7 artificial climbing handholds and numerous built-in hand/foot hold, 9 mounting bolts, t-nuts fixed inside for all positions of holds and wall size 6m . high and , parachute ubuckles and color coded straps for beginers at the site of work and laying on the required surface including labour etc complete as per the directions of the Engineer in Charge

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Krissh

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Bride & Groom

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Veer the Robot Boy

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Mowgli

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Chota Bheem

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Doremon

Providing and placing Photo Booth sculptures of size 1.50 x 1.50m in given design at the site of work and fixing the same on the required surface including fixing of the same on on the given surface including the cost of labour etc complete as per the directions of the Engineer in Charge:Snow White

Making lawns Using Mexican Ready Lawn , 1 x 2 feet size panels each including finishing the base, breaking of clods, removal of rubbish, dressing , planting lawn at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all completeLantana (Red)

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all completeLantana (Yellow)

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete :Alphinia Speciosa

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Heliconia

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Spider Lily

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Duranta

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Plumeria Alba

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Ficus Benjamina

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Dracena Victoria

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Buddha Bamboo

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Codiaceum Multicolour

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Crotons

Providing, supplyling & planting the blow mentioned trees n the site of work including, preparing the ground for planting, supplying of manure/ red soil & pplanting the same as per the requirements etc all complete:Bouganvillae

Supplying and placing FRP dusbins of cartoon figure dustbins of as per given drawingof height 3ft including tyransportation to site of work etc complete.

Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal hoints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar Reinforcement, tarpaulin sheet to be paid separately)

Supply of marine class fibre structure made out of marine grade fibre glass U.V stabelized class - 1 polyster composite with glassfibre reinforcement. Supply of Marine Class Fiber structure made out of marine grade fiber glass U.V stabilized class-1 polyester composites with glass fiber reinforcement .Inner frame of the Gazebo is hot dip galvanized pipe to provide the strength to structure so it can sustain wind speed 120KM/HOUR. Fiber structure is individually hand crafted to replicate any frame so it look alike metal or cast iron. Gazebo should be light weight and modular so it can be fitted easily and shifted whenever required. All the hardware should be SS 304 to avoid the corrosion. Self-color textured surface finish with scratch resistant aliphatic grade U.V. stabilized PU paint with minimum standing life of 10 year.Dimesion :- Width x Height = 11ft x 10ft 7.5inch Model Name:- Florentine

Supplying & fixing at the site of work a Fibreglass sculpture of given design for 0.75 m wide and 1.5m height on a pedestal including the necessary fitting & fixtures etc all complete as per the directions of the Engineer in Charge

Supplying & fixing at the site of work a Fibreglass sculpture of given design for 1.00 m wide and 1.5m height on a pedestal including the necessary fitting & fixtures etc all complete as per the directions of the Engineer in Charge

Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg)

Pre-cast cement concrete kerb-stones(factory made) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.Size 30 cm L x 50 cm H x 15 cm T

Pre-cast cement concrete kerb-stones(factory made) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.Size 60 cm L x30 cm H x 10cm T

Supplying and fixing of Factory made Precast RCC slabs at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reinforcement, Certificate from manufacturer shall be produced indicating grade of concrete and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.(B) Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete..

Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.25 mm thick.

Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbing completegranitic slab (jet black with mirror polish) 20mm thick add 10% wastage 1.00

Supply & fixing benches of Arihant make PGGD 18 or its equivalent including all fittings & fixtures etc complete including transportation to the site of work

Neat Cement punning

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 15 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 50 mm nominal outer dia pipes.

Providing and fixing brass bib cock (heavy) of approved quality : 20 mm nominal bore

Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing non-return valve of approved quality :50 mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :15 mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :50 mm nominal bore

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part II) ,IS:7098(Part I) with latest amendments of following size. (2)3 Core 4 sq.mm

Supply of 4 core unarmoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size.(4)4 Core 16 sq.mm

Supply and making cable end terminations with brass compression gland and copper lugs for following sizes of 3 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required (2)3 x 4 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required(5) 4 x 16 sq.mm

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil.b) Class B GI pipe, 40mm diameter as per specifications. Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of alminimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and ertifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arangement(plumbing will be paid seperately).(a) In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV but not exceeding 11 KV grade of size not exceeding 120sq.mm direct in ground including excavation in the form of a trench as per cable trench drawing provided by the engineer-incharge, sand cushioning with screened sand bed of 20mm thick, protected covering with bricks placed lenghtwise on top of the cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15cm crown on the top complete as required.(a) In soily strata

Supply, installation, testing and commisioning of electronic type three phase energy meter (KWH), 4 wire , ISI marked, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, with ELT, in class 1.0, 50Hz, 240 V. AC duly tested by MRT along with test certificates, complete as required of following capacity of make L&T only. / 5A CT operated

Providing and fixing M.V. Danger Notice plate of 200mm x 150mm made of mild steel atleast 2m thick and vitreous enaamelled white on both sides and with inscription in single red colour on front side as required

Supplying and fixing following way TPN sheet steel, single door, horizantal type MCB distribution board 415 V on surface/ recess completed with tinned copper busbar neutral busbar earth bar dinnbar detachedable gland plate interconnection phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator b) 4 way ( 8 + 12 ) double door, horizontal type Cat A

Supplying and fixing6 A to 32 A rating, C series SP MCB, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commisionong etc as required (a) SP, Cat A, C series

TP MCB, 63 A, 10 KA, C Series, Cat B

Supplying installation testing and commisioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar dinbar mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCBs/MCBs as required) b) 8 way with 100A, MCCB as incomer, double door, type Cat A

Supplying installation testing and commisioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar dinbar mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCBs/MCBs as required) a) 4 way with 100A, MCCB as incomer, double door, type Cat A

Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required Isolator 4 Pole 63 A, Cat A

GI Pipe Medium Class 25 mm (Civil GSR 1034(f)(iii))

GI Pipe Medium Class 32 mm (Civil GSR 1034(f)(iv))

Steel work welded ( SAIL, TATA ,VIZAG & using electrodes of AdOr make only )in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.In tees, angles, flats and channels

Supply of 3 1/2 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I) with latest amendments of following size.(6) 3 1/2 Core 120 sq.mm

DIN HRC Fuses size size 1,250A

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 120sq.mm direct in ground including excavation in the form of a trench as per cable trench drawing provided by the engineer-incharge, sand cushioning with screened sand bed of 20mm thick, protected covering with bricks placed lenghtwise on top of the cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15cm crown on the top complete as required.(a) In soily strata

Supply and making cable end terminations with brass compression gland and copper lugs for following sizes of 3 1/2 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.6) 3 1/2 x 120 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required 4 x 25 sq.mm

Supplying and fixing of following sizes of PVC conduit alongwith accessories in surface(medium)/ recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm

Supplying and fixing of following sizes of PVC conduit alongwith accessories in surface(medium)/ recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 25mm

Supply, installation,testing and Commissioning of Bollard light 9 watt WW LED,0.6 mtr height including terminations as required and directed by engineer incharge( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of post top Lantern 40W including terminations (Post top latern with elliptical cover,warm white)as required and directed by engineer incharge ( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of Post Top pole ,height of 3.5, outer dia 76 mm including terminations make as required and directed by engineer incharge( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of 9 watt LED projector type spot with spike Integral luminaire black powder coated housing Luminaire type including termination complete with all connections.as required and directed by engineer incharge ( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of 15 watt LED NW projector type spot with spike luminaire black powder coated housing Luminaire including termination complete with all connections.as required and directed by engineer incharge ( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of 25W LED Post top Lantern for Gate Lighting including termination as required and directed by engineer incharge ( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of 120W LED, STREET LIGHT Smart and Efficient LED Street lighting Die-cast alluminum housing with epoxy powder coating and having specially profiled cooling fins at the top for effective heat dissipation. IP65,including termination complete.as required and directed by engineer incharge ( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of 10 watt LED Recess Step light luminaire Epoxy white coated aluminium housing, complete with all connections. 285mm X 50mm,Amber color ( MAKE BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of 50W LED Pendent type light fixture including Termination as required and directed by engineer incharge Make ( K-lite, BAJAJ, Havells, Crompton or Atlantis)

Supply, installation,testing and Commissioning of the following sizes PVC HENSEL adaptor box for accommodate 8 way connector , din-rail channel including 1 no 6amps SP MCB C series with 2 nos MS brackets for fixing Hensel box along with full thread 4 inch long bolts and nuts,watchers inculding 3 core pvc insulated copeer cable complete connections.including termination as required and directed by engineer incharge.Supplying of 7mtr poles

Supply, installation,testing and Commissioning of 7m Conical pole-Top70mm, Bottom-130mm, Baseplate-200x200x12. Plate thickness should be of 3mm with channel type bracket suitable to install 1 no 200W LED floodlight and foundation bolts. Pole shall be along with PU paint. including termination as required and directed by engineer incharge (Make Bajaj, K - Lite or equivalent)

Supply, installation,testing and Commissioning of 7m Conical pole-Top70mm, Bottom-130mm, Baseplate- 200x200x12. Plate thickness should be of 3mm with special type decorative Single arm bracket suitable to install 1 no LED Street light and foundation bolts. Pole shall be with PU painted as required and directed by engineer incharge. (Make Bajaj, K - Lite or equivalent)

Supply, installation,testing and Commissioning of 7m conical pole-Top70mm, Bottom-130mm, Baseplate-200x200x12. Plate thickness should be of 3mm with special type decorative Double arm bracket suitable to install 2 no LED Street light and foundation bolts. Pole shall be with PU painted including termination as required and directed by engineer incharge. Make Bajaj, K - Lite or equivalent)

Supply and installation of 4 nos M20 x 600 mm long J type foundation bolts

Supply, installation,testing and Commissioning of 200W LED floodlight with,heat resistant toughened glass with IK 08 impact resistance,MS powder coated mounted bracket. ,IP66,mounting bracket having three numbers holes provided along with luminaries. including termination as required and directed by engineer incharge (make bajaj, Havells, Wipro, Crompton)

Supply, installation,testing and Commissioning of Up down Lighter cylindrical shaped wall mounted with Aluminium alloy housing with outdoor grade,anti-UV power coating IP 65 rating 8 watt. including termination as required and directed by engineer incharge ( MAKE BAJAJ, Havells, Crompton or Atlantis)

CK CONSTRUCTION