Special Repair and Maintenance of LPWD Division Office at Kalpeni

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead upto 50mtrs and lift upto 1.5 mtrs

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 river sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 coarse sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on exposed surfaces including centering and shuttering in -

Cold twisted steel reinforcement for R.C.C work including bending, binding and placing in position complete.

Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand)

Providing and fixing 35mm thick panalled glazed or panelled and glazed shutters for doors and windows and clestory windows including anodised aluminium butt - hinges with necessary screws Karimaruthu wood including 4mm thick glass panes.

Providing and fixing brass tower bolt (barral type) wth necessary screws etc complete. (b) 100 mm x10mm

Taking out doors, windows and clerestory window shutters (steel or wood) and including resizing and refixing of shutters.

Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws .

Providing and fixing nickel plated M.S pipe curtain rods with nickel plated brackets ; 20mm dia (Heavy type)

Demolishing C.C. /R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials upto a lead of 1000m, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge. In Cement mortar

Providing and fixing Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fastners, stainless steel bolts etc,. of required size on the top of the floor or the side of waist slab with suitable arrangements as per approval of Engineer-in- Charge(for payment purpose only weight of stainless steel members shall be considred excluding fixing accessoires such as nuts, bolts, fasteners etc.)

Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White ,ivory,Grey,Fume red brown,laid on 20 mm thick cement mortar 1:4 ( 1cement, 4 metal sand ) and joining with white cement and matching pigment etc... complete.flooring)(Khajaria /Bell/Jhonson Mat finished tiles )

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-incharge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 metal sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Extra for providing edge moulding to 18mm thick tiles counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Painting wood work with Deluxe multi surface paint to give an even shade.Two or more coats applied on @0.90 ltr/ 10 sqm )over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture. (Nerolac or equivalent)

Finishing with with Epoxy paint (two or more coats) at all locations prepred and applied as per manufacture's specifications including appropriate priming coat ,preperations of surface,etc.. complete on steel works.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):

Providing and fixing12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings. including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work, including cutting chases and making good the wall etc.)

20mm Nominal bore

32 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings. this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work.

20 mm nominal bore

32 mm nominal bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete. 20 mm nominal bore

Providing and fixing CP brass stopcock of approved quality and manufacture complete. 20 mm nominal bore

Providing and fixingnominal guage CPVC Ball valve 25mm nominal bore

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.For thickness of tiles above 10 mm and upto 25 mm

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work, 110mm nominal bore

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work63 mm nominal bore

Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC with plastic seat and lid (Jaquar or Equivalent)(Model No. SLS- WHT-0311/ SLS-WHT-0318)

Providing and fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. (Jaquar or equivalent)

White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap., (Model No. FNS-WHT-0606, FNS-WHT-1503)

Providing and fixing mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. (Cera or equivalent)(Model No. 5561 Mirror size 700x500mm

Providing and fixing Health faucet (hand Shower) 15mm dia

Providing and fixing PTMT towel rail brackets fixed to wooden cleat with CP brass scerws with concealed ritting arrangement of approved quality and colour. 600 mm long towwel rail brackets with total length of 645mm, with 78 mm and effective height of 88 mm, weighing not less than 190gms.

Providing and fixing PTMT liquid soap container109mm wide,125mm high and 112 mm distance from wall of standared shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms.

Providing and fixing CP Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 ,15 mm nominal bore

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m2

12mm cement plaster 1:4 (1cement :4 metal sand)

Providing and laying cement concrete 1:2:4(1 cement: 2 M. sand : 4 graded stone aggregate 20mm nominal size).

Dismantling of flushing cistern of all types (C.I/PVC/Vitrious china) including stacking of useful materials near the site and disposal of unservicable materials within 50 metres lead as per direction of Engineer-in-Charge:

MOHAMMED NAVAB SHAH C G