REPAIR/ REPLACEMENT OF INTERNAL WIRING, FITTINGS AND FIXTURES, DISTRIBUTION BOARDS, MCBs AND ALLIED WORKS IN OTM AND MARRIED ACCN IN RV AREA AND PINTO PARK AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10

Amount

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M&L for point wiring for following with single core PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and modular metal flush boxes alongwith outer cover plate for mounting modular switch, socket and electronic regulator and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm FRLS (Nominal area), complete all as specified. Note :- i) Cost for Modular metal flush boxes and modular cover plate shall deemed to be included in the item rate. ii) Cost for cutting, chasing and making good the disturbed surfaces shall deemed to be included in the quoted rate. One light point controlled by one switch one way

One fan/exhaust fan point controlled by one switch.

One socket outlet 3pin 5 Amp controlled by one switch on independent board

One 3 pin 5Amps socket out let point on the same board controlled by one switch complete

One bell point controlled by one bell push 5 Amps

All as per Srl item No 3 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

S&F of modular switch 1 way 6 Amps one module complete all as specified and directed by Engr-in-Charge.

S&F of modular socket 6 Amps 2/3 Pin combined 02 module complete, all as specified and directed by Engr-in-Charge.

S&F of modular switch one way 16 Amps, one module complete, all as specified and as directed by Engr-in-Charge.

S&F of socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed by Engr-in-Charge.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

S&F of electric bell, multi music type, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge.

S&F of modular bell push 6 Amps one module complete all as specified and as directed by Engr-in-Charge.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed by Engr-in-Charge.

M & L for Point wiring for the following with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable (with proper colour code red, black & green) 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including pressed steel boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete all as spd and directed by Engr- in- Charge Note :- i) Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate. (a) One light point controlled by one switch one way

(b) One fan/exhaust fan point controlled by one switch.

(c) One socket outlet 5 Amp controlled by one switch on independent board

(d) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete

(e) One bell point controlled by one bell push 5 Amps

(f) One light point controlled by two 2 - way switches

All as per Srl item No 17 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

S&F of switch piano flush type 5 Amps, single pole one way complete, all as specified and directed by Engr-in-Charge.

S&F of switch piano flush type 5 Amps, single pole two way complete, all as specified and directed by Engr-in-Charge.

S&F of socket out let 3 pin 6 Amps, flush type complete, all as specified and directed by Engr-in-Charge.

S&F of switch piano flush type single pole one way 15 Amps complete, all as specified and as directed by Engr-in-Charge.

S&F of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed by Engr-in-Charge.

S&F of flush type bell push, 5 Amps complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for stepped type fan regulator 120 watt, 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engr-in-Charge.Make : Anchor/Cona/Rider.

Supply and fixing for stepped type modular fan regulator 100 watt 01 module, 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for stepped type modular fan regulator 100 watt 02 module, 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engr-in-Charge.

S&F in replacement LED Bulb B22 base 12 W 230V 50Hz any colour complete all as specified complete

S&F in replacement of Modular white cover plate with frame, but 1 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular white cover plate with frame, but 2 module complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular white cover plate with frame, but 3 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular white cover plate with frame, but 4 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular white cover plate with frame, but 6 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular white cover plate with frame, but 8 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular metal flush box, but 1/2,3 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular metal flush box, but 4 module, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Modular metal flush box, but 6 & 8 module, complete all as specified and directed by Engr-in-Charge. Note :(a) For item No 03 to 16 and 34 to 42 contractor shall quote rate as per existing Makes and model as per site suitable for modular cover plate to fit in the existing. Make : Indosain/Havells/Roma/Crabtree/Legrand

S&F in replacement of surface mounting LED round surface down lighter 12 Watt with high effeicient LEDs & glare free opal diffuser with driver internally pre wired etc complete all as specified and directed.

S&F of Indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make - C&S/ Philips/Havells.

S&F of Indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt , bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make - C&S/ Philips/Havells.

S&F for Bulk head LED fitting 10 watt with PDC aluminium housing and milky diffuser complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete Make: Halonix Cat Pt No HLBH-02-10-CW or equivalent in Wipro/Philips/Havels/ Syska.

S&F of Decorative LED wall bracket light fitting made up of Polycarbonate suitable for B-22 base including one No 12 watt LED bulb, complete all as specified and directed. Make- Halonix / C&S/Philips.

S&F in replacement of wall mounting type decorative fitting,made up of Polycarbonate including 9 W LED lamp B22 base complete with connection with and including copper conductor cable of suitable size including taking down the existing unserviceable fitting complete all as specified and directed by Engr-in-Charge.

S&F in replacement of LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2'x2' size complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size .all as specified and directed by Engr-in-Charge. Make :Halonix /Phillips/Havells

S&F in replacement of LED lamp E 27 base 4.9 W 3000 K .all as specified and directed by Engr-in-Charge. Make : Halonix/Phillips/Havells

S&F in replacement of LED lamp E 22 base 6 W 3000 K .all as specified and directed by Engr-in-Charge. Make : Halonix/Phillips/Havells

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 4 way double door, 200 Amps, rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make: Havells/CG/Standard/Leagrand.

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way, double door , 415 Volts 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge

Supply and fixing in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 6 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge

Supply and fixing in replacement of vertical type load line distribution board, double door , 12 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of vertical type load line distribution board, double door , 8 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of for vertical type load line distribution board, double door , 4 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of TPN/ TP and current carrying capacity 40 to 100 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of TPN/ TP and current carrying capacity 16 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 AMP in the MCB DB complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP in the MCB DB complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning.all as specified and directed by Engr-in-Charge

Supply and fixing in replaccement of metel clad socket outlet 3 pin, two phase one neutral , 20A suitable for metal clad AC boxt complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repalcement of metel clad plug top 3 pin, two phase one neutal 20A suitable for metal clad AC boxt complete all as specified and as directed.

Supply and fixing in replacement of MCCB, 3 pole 100 A, 16KA, 415Volts complete all as specified and directed all as specified and as directed. .

S&F of MCCB, 4 pole 100A, 16KA, 415Volts complete with connections all as specifiedd and directed by Engr-in-Charge.

Material and labour for submain wiring with 2 RUN of 2.50 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and One RUN of 2.50 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

All as per item No 70 here-in-before but for size 2 RUN of 4 sqmm and one RUN of 4 sqmm complete

All as per item No 70 here-in-before but for size 2 RUN of 6 sqmm and one RUN of 6 sqmm complete

All as per item No 70 here-in-before but for size 2 RUN of 10 sqmm and one RUN of 10 sqmm complete

All as per item No 70 here-in-before but for size 4 RUN of 6 sqmm and two RUN of 6 sqmm complete

All as per item No 70 here-in-before but for size 4 RUN of 10 sqmm and two RUN of 10 sqmm complete Note for ser item No. 70.00 to 75.00:- Two run of main wire, one run of earth wire, PVC conduit and necessary cutting chases shall be measured and paid as one run.

Supply and fixing in replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed by Engr-In-Charge.

Supply and fixing in replacement of globe Garden light of any type and colour with 4 feet long PVC pipe 40mm dia including PCC block for fixing of GI pipe complete with all accessories internally pre wired and including connecting up two core copper conductor cable complete all as specified and directed by Engr-in-Charge.

M&L in replacement rigid non metalic PVC conduit (medium grade) ISI marked 25 mm dia inclusive of tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as coupler lock nuts saddles, pipe hook etc for replace damage existing sub main wiring conduit complete, all as specified and directed by Engineer-in-Charge.

M&L in replacement rigid non metalic PVC conduit (medium grade) ISI marked 20 mm dia inclusive of tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as coupler lock nuts saddles, pipe hook etc for replace damage existing sub main wiring conduit complete, all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of LED bldg security light 60 watt IP 66 with internally prewired incl electronic driver and connecting up with three core flexible copper condutor 1.5 sqmm cable complete all as specified and directed.

Supply and fixing in replacement Decorative wall light/ wall lamp comet indoor wall lamp grey/wite colour sconce for living room & bedroom B22 base complete all as specified and directed by Engr-in-Charge. Make phillips

Supply and fixing in replacement LED bedside wall light surface mounted spotlight reading light night lamp long arm 28cm gooseneck warm white antique brass finish complete

Supply and fixing in replacement Gangbox 15 Amp flush type ( 01 switch + 01 socket) complete

Supply and fixing in replacement Gangbox 5 Amp flush type ( 02 switch + 01 socket) complete

Supply and fixing in replacement Gangbox 15 Amp flush type ( 01 switch + 01 socket) complete

Supply and fixing in replacement combined box 16 Amp 6 pin 3 module complete

Supply and fixing in replacement combined box 16 Amp 6 pin flush type complete

Supply and fixing in replacement combined box 6 Amp 3 pin flush type complete

Commercial Traders

M/S Anand Enterprises

M/s Prakash Enterprises

M/S R K JATOLIA ENTERPRISES

Sumit Enterprises

yameen enterprises

Grid Infratech Pvt Ltd

JAIPAL AND BROTHERS