SPECIAL REPAIR TO BLDG NO T01 T40 T13 T38 T39 AND T92 AT 59 ENGR REGT AND BLDG NO T01 AT 514 NSC OF 51 NW SIG REGT UNDER DETT B GE 862 EWS

Sch 'A' Part-I (B/R works). M & L for light shade or printed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tiles, complete all as specified and directed.

M&L for non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:3) including dismantling of existing tiles, complete all as specfied and directed.

M&L for coloured glazed ceramic tiles with highlighter tile in between on vertical surface of size 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM (1:3), including dismantling of existing tiles, complete all as specfied and directed.

M&L for providing Mirror polished kota sotne slab flooring 18-20 mm thick over and including 20 mm thick screed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old tile in any type, complete all as specified and directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 after dismantling old unserviceable of skirting, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) including demolition of old concrete, complete all as specified and directed.

Demolition of reinforcement cement concrete in roofs, beams, staircase, chajjas and similar suspended work, complete all as specified and directed.

M & L Reinforcement cement concrete nominal mix type B1 1:2:4 ( 20 mm graded aggregate) in slab for cooking platform supported on wall, beam and column in floors, roofs, landing, etc, complete all as specified and directed.

S&F TMT steel bars 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip, complete all as specified and directed.