Interior Renovation works of IRFC premises and hired office space, UG floor, NBCC Place, Pragti Vihar, New Delhi

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 40.00 Cum 6326.05 253042.00

Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern in linear portion of the

building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with

pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 150.00 Sqm 6095.50 914325.00

ENGINEERED WOODEN FLOORING Panel 1820x145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank

out of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC controlled

sources Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic

use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request "Wood for Life" Edge Protect + Provides a

warranty on build-up of residue dirt along the edges due to maintenance over the years 10 years "Wood for Life" Surface & Edge Protect +

(lacquered products only) Provides a warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges due to

1.03 M.R. maintenance over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured 120.00 Sqm 6054.00 726480.00

Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate from samples Surface treatments cf

catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping - difference in height (mm) ≤ 0,20 difference in width

(mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width % ≤ 0,2 Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes

30 - 85 % RH Cupping short side min % ≥ - 0,20 Open joints short side (mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating

Suitable of special installation instructions.or its equivalent

Providing and fixing removable raised/false access flooring with systemand its components of approved make for different plenum height with

possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand

G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer

diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level

adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor

(base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for

securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed

by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor

11.54 panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc.

1.04 all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade

(FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones.

The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and

20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom

plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be

factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface

flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre

of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an

impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All

specification must be printed on the side of the panel to ensure the quality of the product.

11.54.2 450 mm Finished Floor Height (FFH). 10.00 Sqm 5407.15 54071.50

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm. Designed to

conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

2 Digitally signed by AMIT

Providing, Supply and laying 5mm thickness with 0.50 wear layer (Luxury vinyl flooring of approved design & pattern as per architect's approval

& instructions).

Type of flooring: Vinyl synthetic floor covering, heterogeneous with EPT Sheild (Anti-Bacterial & anti-Fungal), SGBP certified.

Overall thickness:- EN ISO 24346: 5.0 mm. Thickness of wear layer :- ISO 24340: 0.50- 0.55mm. Abrasion Group: EN 660-2, Class T. Binder

content wear layer : EN ISO 10582 typer I (HPD certified). Level of use - EN ISO 10874 class 23/33/42. Dimensional stability :- ISO

23999<0.10% & Culing after exposure to heat <1.0mm . Safety Creteria, Fire resistance EN 13501-I Bfl-s1 (Class it's 5in @ 250psi min

Formaldehyde Group :- EN 717-1 (Ei0 VOC emissions:- IAC Gold Certified very low VOC of approved quality complete as per Architect or

Engineer in charge

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than

11.41A 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

1.07 sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

TOTAL FLOORING WORKS 1678729.75 2313984.97

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide

x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x

230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230

mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound ,

jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 325.00 Sqm 1145.95 372433.75

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 50mmx100mm (50 mm width & 100 mm Height) U Shape

panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall

be high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20

2.02 MR mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 50.00 Sqm 4245.00 212250.00

m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension

clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to

maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder Coated .The top coat of

panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to 6Mtr OR required length.

2.03 MR Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cut out to hold on panel in a 25.00 Sqm 4663.00 116575.00

module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices maintaining a module of 75mm .4mm dia

galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I.shall be matching with the panel.

Providing and fixing suspended Demountable acoustic ceiling in visible, but flush grid system- 300x1200 x12.5mm flush grid system with high

grade, glass fibre reinforced, acoustic, white painted, gypsum tile with acoustic perforation as Micro 3mmx3mm- c/c 8.33mm upto 0.70 NRC

Material: Perforated plasterboard

Board type: Ceiling tile

Length x width x thickness: 300x1200x12.5mm

Edge: E, recessed grid system (8mm recess)

Perforation: Micro

2.04 MR Perforation percent: 10.2% 250.00 sq m 3597.18 899295.78

Surface: Water-based acrylic paint

Colour: White NCS 0701 Y24R, RAL 9003; gloss 5

Attachment: 15 mm T-grid system or U line Grid

Suspension: Recessed grid system

• Light sockets of upto 3.0 kg per sqmtr can be integrated directly into the ceiling tiles.

Fire rating: A2-s1,d0

3 Digitally signed by AMIT

Providing and fixing Triangular Box ceiling is manufactured from light weight G.I and folded into U Shape profiles. Each panel has anominal cell

wall thickness of 15mm to give a precise engineered ceiling appearance. It has a width of 15mm and height between 50-60mm. Maximum

2.05 MR length available is 2 metre and its thickness is(.35mm) in G.I. It has equilateral trinagles having each side length 175mm. It allows fire detection 215.00 sq m 4245.00 912675.00

and control system, airconditioning and other services to be located within the ceiling void and we withstand the warranty against any

manufacturing defect for the period of two years from the date of supply.

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric coverings

made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with

weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission of

50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The

fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in

accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer

2.06 MR guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done 20 sq m 11863.00 237260.00

at room temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush finish of

tapered and square edges in desired design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in

modules/ PCB with recommended wattage as per manufacturer's standards to give an effect of ambient lighting. LED, LED spacing / Pitch

should be atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage

of 8-10W/mtr. LED modules/ PCB should be positioned properly to provide an even light flow, casting noshadows or dark spots. LED Driver

TOTAL FALSE CEILING WORKS 372433.75 2378055.78

3 WALL FINISHES WORKS

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for minimal frame, room dividing solutions.Single

glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections

ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test

certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with

help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to

Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines

to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on

one side. Optional Profile Bottom Seal pair for additional accoustic. Glass thickness-10 (LSG).shall be included in the product.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 2.00 cu m 131576.95 263153.90

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug

etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 4.00 cu m 163814.10 655256.40

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with

3.04 9.21 frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 41.00 Sqm 2015.75 82645.75

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door

shutter to be measured).

Providing and Fixing Glass Door Handle-22X922 mm Dtype Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of

approved make and model all complete as per the direction of Engineer-in-charge.

For 10 / 12 mm Glass.

3.06 MR Material : Stainless Steel. 34.00 Each 6070.00 206380.00

Finish : Satin Stainless Steel (SSS).

Providing and FixingMortise Lock Premium SS Mortise Lock Body SB/TB for door thickness 25-50 mm for wooden doors of approved make

and model all complete as per the direction of Engineer-in-charge.

3.07 MR Door thickness : 25mm to 50mm 44.00 Each 895.62 39407.18

Finish : Satin Stainless Steel (SSS), Bright Chrome Plated (CP)

4 Digitally signed by AMIT

Providing and Fixing Double cylinder Floor Spring- for with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years

Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Floor spring for single-leaf single action / double action swing door. Installation in the floor.

High quality cast iron mechanism body.

3.08 MR Provided with door stop function and explosion proof device. Suitable for wooden, glass and alu etc. all kinds of door. 22.00 Each 8956.20 197036.31

Maximum. door opening angle in each direction : 130°.

Controllable closing angle : 90° +15° -0°.

The width inside the frame can be adjusted by 10 mm, length by 7 mm and height 4 mm.

Maximum door width - 850 mm / 950 mm / 1100 mm / 1400 mm.

Maximum door weight 70 kgs / 105 kgs / 150 kgs / 250 kgs.

Tested - 500,000 Cycles.

Cover plate finish : Satin Stainless Steel.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in

cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and Fixing Top Pivot-001,002 top and Bottom Strap for wooden doors of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing Dead lock Back set- 50 mm with Key Hole for wooden doors of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing Cylinders with Regular Keys- 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of

approved make and model all complete as per the direction of Engineer-in-charge.

3.12 MR Cylinder one side knob and one side regular key (3 Keys). 17.00 Each 797.91 13564.53

Use with mortise lock, Standard key

Providing and Fixing - Double cylinder Floor Spring with Top-Bottom Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg.

Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold open.Suitable for 10-12 mm

3.13 MR Weight of floor spring approx : 6kg 27.00 Each 9858.00 266166.00

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved make and model all complete as per the direction of

Engineer-in-charge.

Provided with door stop function and explosion-proof device. Suitable for wooden, glass and alu etc. all kinds of doors.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing

3.14 21.18 top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door 65.00 Sqm 4540.70 295145.50

fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass

with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5

3.15 MR pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass 35.00 Sqm 2467.00 86344.88

Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural

Market Department. Contractors payment wouldn't be released until & unless he/she produces orginal warranty certificate from the

Providing and fixing Bollard Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 15 mm thick Grooved

wooden acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design / Architects’ approval,

3.16 MR the wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the edge of panel 300.00 Sqm 3858.44 1157531.23

shall be Tounge and groov to be fixed with clips on aluminium profile designed specially fo the panel. the panel will be mounted with the help of

clips on Bollard Aluminium extruded Keel. The grooved acoustic panel laminated in desired shade as per Engineer In charge / Architect’s

5 Digitally signed by AMIT

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer, fixed with

compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted

on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain coating process); opaque (if viewed against a

3.17 MR support wall), uniformly coated with PU lacquer (50 micron thick coating or more); panel to panel colour consistency (measured by photo 50.00 Sqm 4304.78 215239.08

spectrometer); highly durable (passes hardness test for minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or

equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone

used should not react with lacquer coating (compatible neutral cure silicon)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made

of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at

a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side of frame work

by 25mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each)

to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a

flush finish with recommended jointing compound, jointing tape, angle beads at corners (25mmx 25mmx0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS:

2095: part 3 (Board with BIS certification marks)

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with Acrylic Solid Surface 12mm

thick sheets straight fabricated on a single face, finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate

shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural requirement & duly painted with anti-rust red oxide coating

and covered with 12 mm thick water proof ply as per the design and dimensions approved. The proposal includes the cost of preparing

appropriate substrate surface over the civil structure provided, along with material cost & installation / fixing on straight walls etc. FOR ALL

WALL CLADDING, TABLE TOPS ETC. COMPLETE

Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller Blinds comprising of

optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-

19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be complying to ISO4674 &

breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe installation,moulded plastic with steel spring

support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left hand

side of the Shade. The Shade when lowering or raising, shall be automatically locked in position upon release of the ball chain by means of a

built in friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic witha

steel location pin. The plug shall be inserted into the tube end. (Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS

shall be of coated steel & provided with covers and used in right hand or left hand positions differentiated by the acceptance of the of the

rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The

Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter &

skin thickness of 1mm and shall incorporate a key way integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat

Bottom made up of powder coated steel. The BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to

it on 6mm pitch to form an endless ballchain.It is used for raising or lowering action of the shades.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details of

Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate.

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to be constructed out of 18 mm MDF, finished

3.25 MR with 1mm. Thk laminate shade as per Engineer in charge’s approval. Cost to include edge margin in teak wood and poilshed in colour 10.00 RM 1850.27 18502.68

matching laminate.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 35.00 Sqm 1018.05 35631.75

3.27 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 35.00 Sqm 86.45 3025.75

13.4 12 mm cement plaster of mix :

6 Digitally signed by AMIT

3.29 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 350.00 Sqm 214.30 75005.00

13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work 2000.00 Sqm 137.85 275700.00

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on

3.31 wooden /steel frame work, complete as per direction of Engineer-in-Charge

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on

3.32 MR wooden /steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board 350.00 Sqm 273.00 95550.00

Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I. sheet

with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness)

fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater than 50 mm

from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed

perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers.

Maintain 5 to 10mm gap between C Stud and web of U Track.

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss/ matt/ suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick,

3.35 12.57 wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. 500.00 Sqm 307.35 153675.00

complete as per directions of Engineer-in-Charge.

TOTAL WALL FINISHING WORKS

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be supported

on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least

4.01 MR 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved. 5.00 Sqm 7249.00 36245.00

The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed

aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl

plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet

boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be supported

on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least

18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved.

The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting

from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to

1000X560X710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels 5.00 Each 3548.41 17742.03

4.02B MR Providing and fixing baskets 5.00 Each 4012.65 20063.23

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting

of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse

sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii)

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet.

(Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

7 Digitally signed by AMIT

Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and any other details as and

when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed after due appproval from Engineer

TOTAL MISCELLANEOUS WORKS 19356.25 384875.25

Dismantling, repacking, transporting of AV/IT equipments, Furniture or any other required material from the old location to new location,

reassembling in the new location in accordance with approved drawings and layouts complete and as per the satisfaction of the engineer in

8 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR 2021/ QUANTIT

S NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) EACH 8 14614.00 116912.00

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 8 2267.00 18136.00

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 8 3065.00 24520.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 8 13797.00 110376.00

SET, SIZE: 375X520X400 MM

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

ADJUSTABLE WITH WALL FLANGE 15mm

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET)

WITH 8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

11 and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.34 Providing and fixing toilet paper holder

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

15 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 24 500.35 12008.40

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3

16 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster

and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 8 362.40 2899.20

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with

matching surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

18.7 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and testing of joints complete as per direction of Engineer

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 30 325.10 9753.00

18.7.3 25mm nominal outer dia pipes METRE 30 408.55 12256.50

18.7.4 32mm nominal outer dia pipes METRE 60 500.95 30057.00

18.7.5 40mm nominal outer dia pipes METRE 20 674.35 13487.00

18.7.6 50mm nominal outer dia pipes METRE 20 927.00 18540.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.

18.8.1 15mm nominal outer dia pipes METRE 30 441.15 13234.50

18.8.2 20mm nominal outer dia pipes METRE 45 513.75 23118.75

18.8.3 25mm nominal outer dia pipes METRE 10 626.05 6260.50

18.8.4 32mm nominal outer dia pipes METRE 10 712.75 7127.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

21 standards and weighing not less than 690 gms.

Digitally signed by AMIT

18.51.1 15 mm nominal bore EACH 6 708.40 4250.40

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes

for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including

all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with

or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils,

suspended from floor under false ceiling or embedding the pipes laid under floors / building

in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone

MR aggregate 20 mm nominal size) including cost of shuttering for proper completion of the

work, breaking and making good the walls and floors etc. after pipes have been duly laid

and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work

includes commissioning of all pipes lines as per drawings and specifications and as directed

by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 75.00 536.00 40200.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8320.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 23 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 24 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 20 536.00 10720.00

MR 25 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 20 726.00 14520.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR TOTAL TOTAL

DESCRIPTION QUANTIT

S NO NO UNIT RATE AMOUNT AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

A.1 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

A.2 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 5700 334.00 1903800.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

A.5 3 pin 5/6 amp socket outlet

1.24.5 6 pin 15/16 amp socket outlet Each 43 197.00 8471.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 2 233.00 466.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 900 275.00 247500.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 2 334.00 668.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 2 439.00 878.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 90 1005.00 90450.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 90 1365.00 122850.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable RM 20 705.00 14100.00

(b) 3.5 C x 95 Sqmm XLPE cable RM 15 604.00 9060.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 15 504.00 7560.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 15 403.00 6045.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 20 345.00 6900.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.6 Telephone Socket Outlet Set 126 148.00 18648.00

1.24.7 TV socket outlet Set 23 148.00 3404.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

1.18 unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 20 1279.36 25587.17

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 20 1027.52 20550.33

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

E.10 directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Set 575 47.00 27025.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

conduit as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 8 13838.00 110704.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

G.1 MR Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

Digitally signed by AMIT

(a) 63 Amps, TPN, MCB -1 Nos.

(b) 40 Amps, TPN, MCB - 3 nos

Panel complete as above Each 4 60000.00 240000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00

front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00

front side as required

Total of Electrical items 4162291.00 523033.22

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

M-2022)/ UNIT QUANTITY RATE

DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Per HP 80.0 16415.00 1313200.00

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically

sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant,

DSR vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated

VRV capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit

shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled

with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall

not be less than 3.1 and IEER not less than 6.5

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

2 vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%,

50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in

case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air

inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

5 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc. as required :

a 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 100 245 24500

b 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 60 331 19860

c 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 80 466 37280

d 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 60 588 35280

e 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 80 707 56560

f 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 80 865 69200

g 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 20 1022 20440

h 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 20 1108 22160

Providing and supplying 2 ton inverter AC of split including outdoor and indoor, piping etc., complete Each 2.0 62000.00 124000.00

in all respect (Min 4 star and above as per direction of EIC)

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints i.e.

j MR Refnet Joints/ Header with Insulation for refrigearnt piping

TOTAL HVAC WORKS 2658010.0 216316.0

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - EPABX

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of Analog EPABX

of 8 Incoming lines and 200 Analog Extensions complete in all

Supply Installation, Testing and Commissioning of Analog

2 Speaker Phone with backlight. Nos 126 2750.00 3,46,500

Total 4,96,500

15 Digitally signed by AMIT

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

1. Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 METRE 6080 57.00 346560.00

1.53.1 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

2) Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

3 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

4 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG 242 400.00 96800.00

U/UTP Patch Cord Blue, LSZH, C6, 2M Nos.

5 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed 242 400.00 96800.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos.

6 Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for

CAT6 cable termination at rack end. Data Active

Total : A - UTP Components 346560.00 469000.00

B 200 Pair MDF Box

1 200 Pair MDF Box with mounting Frame 1 17500.00 17500.00

2 20 Pair Krone Module 6 2000.00 12000.00

3 25 Pair Riser Cable 35 1253.00 43855.00

Total : B - MDF Box 0 73355.00

GRAND TOTAL A+B 346560.00 542355.00

GRAND TOTAL A+B 346560.00 542355.00

16 Digitally signed by AMIT

S No Description UOM Qty Rate Amount

A. Active Component for Data

Supply, Installation, Testing & Commissioning of Switch with at least 24 X 10/100/1000BASE-

T Ports and 2 x 10G Base-T and 4 X SFP+ Ports, Switching capacity should be 168 Gbps,

Switch should support 16 L3 IP interfaces, ACL, QOS, VRRPv3, Equal-Cost Multi-Path

(ECMP) , UDP helper, Policy-based Route (PBR), 802.1x, Embedded 6 kV surge protection

on ethernet ports, Switch should have console port, RJ45 Management Port and USB port,

1 Should support internal/external redudent power supply for 1+1 redundancy and load sharing. Nos. 5 164468.00 822340.00

Certification: CE, FCC, BSMI, CB and UL. OEM should available in Gartner Magic Quadrant

for Wired and Wireless LAN Access Infrastructure Report from latest last three consecutive

Supply, Installation, Testing & Commissioning of Switch with at least 24 X 10/100/1000BASE-

T POE+ Ports and 2 x 10G Base-T and 4 X SFP+ Ports, Switching capacity should be 168

Gbps, Switch should support 16 L3 IP interfaces, ACL, QOS, VRRPv3, Equal-Cost Multi-Path

(ECMP) , UDP helper, Policy-based Route (PBR), 802.1x, Embedded 6 kV surge protection

2 on ethernet ports, Switch should have console port, RJ45 Management Port and USB port, Nos. 1 171321.00 171321.00

Should support internal/external redudent power supply for 1+1 redundancy and load sharing.

Certification: CE, FCC, BSMI, CB and UL. OEM should available in Gartner Magic Quadrant

for Wired and Wireless LAN Access Infrastructure Report from latest last three consecutive

3 Supply, Installation, Testing & Commissioning of Modules 10G. Nos. 6 23985.00 143910.00

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm) (WXD)

following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D'

Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass

Door,Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C

90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets

4 with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2 EACH 4 38551.00 154204.00

Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos.

Earthling Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos,

Castor Wheels (without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard &

Inside 28 ply EP foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1

etc complete as required

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing

requirements of wireless networks by delivering a better user experience. The 1830 Series

5 extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high- Nos. 8 68820.00 550560.00

performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.

6 Providing and laying of LC- LC multimode OFC type patch cord for data and voice. Nos. 6 3850.00 23100.00

Total : A - Active Component for Data, Wifi 1865435.00

17 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal

Proof Dome camera with 2.8 to 12mm Motorized Lens,Smart IR, up to

30M IR distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR

(Digital Noise Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode,

Triple streams,3-Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux

(F1.4, AGC ON), 0 Lux with IR,Video Compression H.265+, H.265,

H.264, MJPEG,Behavior Detection Intrusion, Crossing line, Motion

1 MR detection, Object left, Missing object,Intelligent Identification Face Nos 6 29913.00 179478.00

detection, Defocus, Scene Change,PoE (IEEE802.3 af) Power

consumption: Max 7.2W,Edge Storage Micro SD Card, Up to 256GB,

ANR Support,Working Environment -40°C ~ +60°C, Humidity ≤ 90%

RH(Non-condensing),Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 16Ch Embedded

Network Video Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K

2 MR Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Analytics Nos 1 80715.00 80715.00

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only

complete etc as required.etc.all complete.

Supply, Installation, Testing & Commissioning of 43" Flat Screen HD led

(24X7) with Interfaces include HDMI, DVI, D-sub, Component and

Composite input as well as RS-232C and RJ45 for extensive

connectivity, remote control and wall mount unit / floor stand complete

with making connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 1 5796.00 5796.00

Supply, installation, testing and commissioning of of Shielded twisted

CAT6 Cable pair CAT6 Cable (STP) complete etc as required 4 pair.

18 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description Image UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire with

LED(Light Emitting Diode) maximum system power: 28W, 120 LM/W system

efficacy, colour temperature of 4000K, neutral white, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, energy efficient

LEDs, CRI>80, luminous flux of 3360 lm, MacAdam 3, R9>0, T.H.D≤10%,

1 MR driver efficiency ≥ 88%, surge protection of 2.5kV, direct light emission, no 60 3312.15 198729.00

Aluminium body, polyester white powder coat applied over a 5-stage pre-

treatment, Prismatic diffuser for glare-free uniform light, UGR<19, Electronic

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), maximum

system power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system

efficacy, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-

2 MR efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester no 250 1094.00 273500.00

powder white coloured coat applied over a 5-stage pre-treatment trim,

prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN

LOW SMOKE) wiring, Electronic control gear,R9>0,MacAdam 3

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire

with LED (Light Emitting Diode), maximum system power 28 W, luminous flux

of luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI>80,

colour temperature of 4000K, Neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

3 MR white coloured coat applied over a 5- stage pre-treatment, high efficiency glare- no 60 4162.68 249760.80

free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS

(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max =

Supply, Installation, Testing and Commisioning of Recessed luminaire with

LED (Light Emitting Diode), maximum system power: 28 W, luminous flux of

2800 lm, colour temperature of 4000 K, Neutral white, 230 V constant current

driver, 70% of luminous flux after 50,000 operating hours, energy-efficient

4 MR LEDs, CRI > 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light no 70 2800.00 196000.00

emission, Luminaire housing in Aluminium Extrution, polyester white powder

coat applied over a 5-stage pre-treatment, Opal diffuser for glare-free uniform

light, integral electronic control gear,

Supply, Installation, Testing and Commisioning of Recessed downlight with

LED (Light Emitting Diode) maximum system power: 5W, Luminous flux of

luminaire 400 lm, Colour temperature of 3000 K, Warm white, CRI > 80, 230V

constant current driver,MacAdam 3, R9>0, 70% of luminous flux after 50,000

operating hours; energy-efficient LED, direct light emission, housing in die-cast

aluminium, Polyester powder white coloured coat applied over a 5-stage pre-

5 MR treatment ceiling trim, with reflector, beam angle of 24°, Electronic control gear, no 100 1200.00 120000.00

Protection class II, IP 20,

19 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable

sounder complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3

11 17.3.1 player (including 6 zone button paging station) with seamless integration facility with main fire No 1 126411.00 126411.00

alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

operating at 240 Volt AC Supply complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete Mtr. 300 173.00 51900.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including connections

15 and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 300 89.00 26700.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

microphone assembly complete as required.

TOTAL FIRE ALARM WORKS 722770.00 28944.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

1 MR Supply, Installation, Testing and Commisioning of smart card reader Nos 5 7,976.00 39,880.00

Supply Installation Testing & Commissioning of Access Control Software

Multi Reader and controller confuguration and upgradable to Enterprise

level with unliimited users. Databse Supports: MS SQL, Oracle, and MS

Access database types. Type of technology supports: IRIS Sacnner,

2 MR Biometric, Face, RFID , etc supports template management , Highly Nos 1 71,160.00 71,160.00

secured communication with server,Allows for real- time monitoring of

system status and user activities with optional audio alerts. tamper

detection, network communication loss, and many other system

SITC of Access IP Master Controller with Enclosure & Power Supply- 1

door Universal 2 Reader TCP/IP Controller Expandable upto 4 Reader

with exit reader module,4 Programmable inputs & 4 outputs 100 mA

MAX ),Temperature: 0 to 70°C (35 -150°F); Humidity: 20 to 80% RH

(non-condensing) , 3000 USERS & 3000 transactions,2 Reader.

Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS

with MS Box Certified.

Supply, Installation, Testing & Commissioning of Smart card Frequency

Excitation (13.56 MHz) Mifare/I- class technology smart Card. Memory

Type EEPROM,Complies with ISO/IEC standards for thickness. Lifetime

Supply Installation Testing and Commissioning of double leaf 600 LBS

6 MR Door Electro Magnetic Lock with complete compatiable Bracket UL Nos 5 4,092.00 20,460.00

Supply Installation Testing and Commissioning Touchless Request to

Exit button with detection range from 4 to 12 cm.

Supply Installation Testing and Commissioning Fire Exit panic Bar

8 MR single/double Door with EM lock and required accessories all included Nos 5 13,670.00 68,350.00

Supply Installation Testing and Commissioning Emergency Door

Release Button, Gree, Key Resettable, DoublePole Double Throw.

Supply Installation Testing and Commissioning of Cat 6 Network cable.

Supply Installation Testing and Commissioning of 8 Core-conductor20 to

Supply Installation Testing and Commissioning of AC 3 Core Plain

Copper conductor, PVC insulated.

Supplying and fixing of following sizes of medium class PVC conduit

13 MR along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required

21 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.1 Pendant type 75 Each 522.00 39150.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) SITC CO2 gas nozzle type - 9 Litre capacity (IS:15683). 6 NOS 12069.75 72418.50

SITC of Mechanical Foam gas cartridge type. 9 Kg

capacity (IS:15683).

SITC of ABC dry powder stored pressure type 6 kg

capacity (IS:15683).

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specifications Qty Offered Price Amount

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder

coated aluminium trims. Tiles: The tiles on the top most frame shall be glass writing board/ clear glass tile. Bottom tiles - Plain metal/

fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on

each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium extrusion having

average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on outer boundary of

these blocks as well as intermediately at certain locations forming conduit for passing cables. These blocks are located in the mid

Workstations L segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the worktops). Top tiles can be offered in

shape 1500 x 1500 variety of combinations. The fins along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping

edge banding of size 1500mm W1 x 1500mm W2 x 600D x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs

- Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be

carried out as per the instructions and guidance received from engineer incharge. The product must be UL Greenguard, BIFMA Level

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder

coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear

glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of

38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights

and horizontals shall be made of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester

powder. Particle board framing is used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for

passing cables. These blocks are located in the mid segment of the panels and can be provided with cutouts for mounting switch boxes

(above or below the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall be 22.8mm thick. Worksurface-

out of 25 mm thk prelam particle board with flat pvc lipping edge banding. Worktop size shall be- 1350mm W1 x 600mmD. Side Unit size shall be

1350mm x 450mm. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free standing

Open Cabin central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per the instructions and

2 guidance received from engineer incharge. 5 1,15,000.00 5,75,000

Providing and placing in place of partitions across these workstations. Partition thickness as 52.4 mm thk and ht - 1200 including powder coated

aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain

metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm

Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals

shall be made of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. The prodcut must

be UL Greenguard, BIFMA Level 3 certified.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder

coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear

glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of

38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights

and horizontals shall be made of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester

powder. Particle board framing is used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for

passing cables. These blocks are located in the mid segment of the panels and can be provided with cutouts for mounting switch boxes

Workstations Linear (above or below the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall be 22.8mm thick. Worksurface-

1500 x 600 out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500mm x 600mm x 750H. Brackets shall be made from 2mm

thick CRCA steel. Pedestals with legs- pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height

3dr = 2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge. The product

must be UL Greenguard, BIFMA Level 3 certified.

23 Digitally signed by AMIT

Schedule of Quantities: Signages

S No Description Unit Qty Unit price Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches

of required size and shape with arrangement of screws in the letters

itself for mounting on the walls or pasting using 3M VHP Tape. Fixing

complete as per directions of the engineer. The Sizes would be Each 1 25,624.00 25624.00

calculated in Sqft as per Logo Design provided.

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper names/ Departments written using plottercut vinyl or

laser cut acrylic letters in approved colour.Inserting provision for Each 44 1,922.00 84568.00

changing names .Fixing provision using 3M VHP double sided tape as

Signage Size 12x5 inch

3 DEPARTMENTAL SIGNAGE (All Floors)

Providing and fixing of Acrylic signage made of 5mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper names /Departments written using plottercut vinyl or

laser cut acrylic letters in approved colour. Fixing provision using 3M Each 10 1,278.00 12780.00

VHP double sided tape as required.

Signage Size 12x5 inch

4 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper names /Departments written using plottercut vinyl or

laser cut acrylic letters in approved colour. Provision of fixing screws/

Studs etc or as per the direction of the engineer.

5 TOILET ICONS

Providing and fixing of Acrylic signage made of 5mm Acrylic with

textured wood finish pasted /White milky acrylic 3mm laser cut pasted

on top with proper icons using plottercut vinyl or laser cut acrylic letter in

approved colour. Fixing provision using 3M VHP double sided tape as

Signage Size :8 "x 8" inch

6 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm

acrylic with Evacuation Plan Printed on photoluminescent media and

inserted between the two frames. Should be fixed on the wall using 4 Each 4 2,306.00 9224.00

Screw/ SS studs. Size 12 inch x 17 inch

7 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from

acrylic sheet of 8 mm thickness laser engraved, Transformer to be

inbuilt. Maintenance - free sealed nickel cadmium battery included •

120V/277V AC Operation • Crystal clear acrylic face panel• Engraved

letters increase visibility • Anodized aluminum faceplate • Field applied Each 6 2,562.00 15372.00

chevron directional indicators simplify installation • Long life, energy-

saving LED lamps • Dual-voltage 120V/277V AC Operation • UL listed.

To be installed at stairs entry. Size 310mm x 175mm

8 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun

board sheet at base with photoluminescent film self adhesive & colored

vinyl ( Red/Green) Plotter cut and pasted on top. Both side / Single Side

facing Complete including fixing on wall with screws and washers or

hanging on ceiling with GI chain/GI Bar complete as per technical

specifications and directions of Engineer.

a Photoluminescent, Fire Hose Reel - 10"x8" Each 4 471.00 1884.00

b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 4 538.00 2152.00

c Photoluminescent, Floor Level - 18"x6" Each 4 538.00 2152.00

d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 4 471.00 1884.00

e Photoluminescent, Fire do not use lift- 10"x8" Each 4 471.00 1884.00

f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 6 471.00 2826.00

TOTAL 226266.00

24 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Total Qty Unit Rate Total Price

Rectangular FRP Planter(LP7A-

2 Rectangular FRP Planter(LP7A-24"X8"X10") 5 Pcs. 1,900.00 9,500.00

Rectangular FRP Planter(LP7A-

4 Round FRP Planter(LP9A-20"X20"X30") 5 Pcs. 3,000.00 15,000.00

5 Round FRP Planter (LP9B-18"X18"X24") 5 Pcs. 2,860.00 14,300.00

Plantation: Supply and installaion of Natural

Plant with sand, fertilizer etc. The plant shall

be decided later on by engineer in

10.1 charge/client in writing specifying size and 25 LS 500.00 12,500.00

name of plant.same may be considered while

10.2 Plantataion / Labour / Loading unloading 25,000.00

NET TOTAL 1,01,650.00

Digitally signed by AMIT