SPECIAL REPAIR TO BLDG NO. P-66 OF TRG BN OF GRENADIERS RC (OTM ACCN) UNDER GE (WEST) JABALPUR

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil exceeding not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for cutting into existing manholes for connecting new drains, 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. surface fair finished complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B1 using 12.5 mm graded stone aggregate as in chajja complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

Use and waste of Formwork to chajjas, troughs and similar items including edges etc., surface fair finished, complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) but except brick complete all as specified & directed. ( Note : Old serviceable bricks retrieved against dismantling shall be re-used)

Supply only water proofing compound (liquid) ISI marked of make as approved by GE complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Taking down shutters of any description, of Area not exc 1.0 sqm each size and removing from site complete all as specified and directed.

Taking down shutters of any description, of Area exc 1.0 sqm but not exc 2.0 sqm each size and easing, adjusting also refixing in the same opening complete all as specified and directed.

Supply & fix factory made solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified & directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, at site complete all as specified & directed.

S&F 35mm thick factory made second class hard wood glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified & directed.

Supplying & fixing 200 mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Supply & fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supplying & fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supplying & fixing 150 mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.

Supply and fix aluminium anodised handles 150 mm size, oval type, stove enamelled black complete all as specified & directed.

Supplying & fixing 20 mm dia mild steel, chromium plated curtain rod of brass fancy type fixed on walls with brass screws and curtain ring complete all as specified & directed.

Supplying & fixing in repairs, stainless steel nobs and bracket complete all as specified & directed.

S&F of 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M&L for mild steel conforming to Fe.290.Gde-E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supplying & fixing for 125x60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and using PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) for making good the disturbed surafce complete all as specified and directed.

Supplying & fixing for 105x60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and using PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) for making good to disturbed surafce complete all as specified and directed.

Supply and fix factory made steel window flush welded with side hung shutters including box type hinges with steel handle, steel peg stay 250mm long with suitable lugs and with glazing bars dovetailed or welded complete all as specified & directed.

Supply and fix factory made steel window flush welded with side hung shutters including box type hinges with steel handle, steel peg stay 250mm long with suitable lugs but without glazing bars complete all as specified & directed.

Supply and fix factory made steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for non-skid coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11Sqm but not exc 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for Machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and using Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete complete all as specified & directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring, 18-20mm thick over & including 15 mm thick cement screed bed in CM (1:6) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut kota stone slab as in skirting/ vertical surface, 18-20mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for ginding and polishing surface of old kota/marble/granite stone flooring, skirting etc by hand or grinding machine, dusting off the surface after grinding, washing and mirror polishing complete all as specified & directed.

M&L for 25 mm thick, PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of floors and the like etc considering the floor slope complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate in roof padding, roof kerbs or mud stops, rounded or chamfered on edge including necessary form work if required complete all as specified and directed.

M&L for 50 mm thick, PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection etc. complete all as specified and directed.

Taking down cement plaster etc on brick walls/ terrazo surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for rendering 15 mm thick in two layers (10mm thick in CM 1:6 & 5mm thick in CM 1:4) with liquid water proofing compound and finished even and fair complete all as specified and as directed. (Note :- WPC shall be measured and paid for separately.)

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling finished even and smooth without using extra cement complete all specified and directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying three coats of white wash as in wall complete all as specified and directed.

M&L for preparing of old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing of old plastered or unplastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M&L for prepration of new plastered surfaces of external walls and applying two coat of cement base paint over & including a coat of appropriate primer complete all as specified & directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description and applying two coats of cement base paint on wall surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and apply two coats of oil emulsion distemper over 2 mm thick wall care putty over a coat of cement primer for smooth finish of wall complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered surfaces of wall and apply two coats of oil emulsion distemper over 2 mm thick of wall care putty over a resistant priming paint for smooth finish of wall complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.

M&L for preparation of old painted surface of wood and wooden based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of red-oxide primer complete all as specified & directed.

M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Supply & fix 40mm bore, low density polyethylene pipe (LDPE) pipes, of pressure rating 6 Kg/cm2, fixed to walls, ceilings or laid in floor fixed complete all as specified and directed.

S&F in repairs, 15mm dia two way bib cock with wall flange ,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed.

Supply and fix in repairs, 15mm dia stop valves/cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, with long shank and cup screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply and fix in repairs, 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F chromium plated brass tubular towel rail, 20mm dia, D type, 450 mm long between flanges complete all as specified and directed.

Supply and fix in repairs, pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia complete complete all as specified & directed.

Supply & fix in repair 25 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Dismantling water tanks of capacity 4000 litres and removal from site to store complete all as specified & directed.

S&F of 4000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Supply & fix, 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed.

S&F in repairs 15mm bore PVC connection pipe 450mm long with PTMT nuts complete all as specified & directed.

S&F in repair, CP shower rose 150 mm dia of size suitable for 15mm bore GI pipe with or without swivel joint including fixing to pipe and union as approved by GE complete all as specified and directed.

Supply and fix in repair 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.

Supply & fix in repairs, Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified & directed.

Supply & fix in repairs, Urinal spreader chromium plated for fixing with 15 mm bore pipe complete all as specified & directed.

Supply & fix in repairs vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed.

Supply & fix in repairs vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 40 mm bore of pipe complete all as specified and as directed.

Supplying and laying of CPVC pipes 16 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and nrass treaded fitting for fixing taps and valves complete all as specified and as directed.

Supplying and laying of CPVC pipes 20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and nrass treaded fitting for fixing taps and valves complete all as specified and as directed.

Supplying and laying of CPVC pipes 25 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and nrass treaded fitting for fixing taps and valves complete all as specified and as directed.

Supplying and laying of CPVC pipes 40 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and nrass treaded fitting for fixing taps and valves complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints,fixed to wall or laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply and fix in repair 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply & fix in repairs, PVC (SWR) branch piece (single Y), equal or unequal, 110 mm bore with access door rubber ring joint fixed to wall complete all as specified & directed.

Supply & fix in repairs, PVC (SWR) branch piece (double Y), equal or unequal, 110 mm bore with access door rubber ring joint fixed to wall complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed.

Supply & fix PVC (SWR) junction single (single T), equal or unequal 110mm bore complete all as specified & directed.

Supply & fix PVC (SWR) junction single (single T), equal or unequal 75 mm bore complete all as specified & directed.

Supply & fix PVC (SWR) junction single (single T), equal or unequal provided with access door, 110mm bore complete all as specified & directed.

Supply & fix PVC (SWR) junction single (single T), equal or unequal provided with access door, 75 mm bore complete all as specified & directed.

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F in repair PVC (SWR) multi floor trap, out let dia 75/110 mm, plain with grating including jointing with solvent complete all as specified and as directed.

Supply and fix in repairs, 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

S&F of PVC waste pipe of size 32 mm flexible with coupling for WHB complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified & directed.

Supply & fix in repairs,Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F figured glass, pin head type 3.0 mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in old work, serviceable beads as obtained from hacking out of sheet glass shall be re-used after cleaning/ rubbing the the same with sand paper, if required as per site. (ii) Glazing in new work, beads shall be supplied with joinery.

Supply and fix sheet glass, ordinary quality 3.0 mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in new steel work/ joinery, rate of oil putty shall be deemed to be included in the unit quoted rate for this item. (ii) Glazing in new wood work/ joinery, beads shall be supplied with joinery.

Easing of steel window shutter of any type or description and size complete all as specified & directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Demolition of reinforced cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

Dismantling of stone slab and tile of any description or thickness of floor , aprons etc laid, bedded and pointed in any mortar including removal of debrise to out side MD land complete all as specified & directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Dismantling and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete all as specified and directed.

Supply,laying & fixing 150 mm nominal bore double wall corrugated (DWC) pipes made of High Density Polyethylene (HDPE) with all accessories i.e. all type of joints, sockets, elbows, bends and end capes etc. including concrete bed cement mortar 1:3:6 type C2 to drain pipe including packing under and haunching against the sides of pipe and sewage pipes having 6.0 m length , conforming to IS - 16098 (Part-2) of SN-8 stiffness with and including necessary jointing materials etc complete all as specified and as directed.

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Auaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specifed and described as under:- (a) Preparation of sunken surface, providing 10 mm thick rendering in cement mortar 1:4 mixed with WPC @ 2 % by weight of cement and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed (b) Supply & providing water proofing with polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) GI pipe 40m bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall

M&L for 10mm thick rendering over roof surfaces in CM 1:3 with using water proofing compound @ 3% by wt of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paid separately as "Supply Only" under respective item of BOQ.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum over lap of 100mm and over lap shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer's as specified for polymeric water proofing membrane.

Taking down/ removing existing roof treatment over roof slab, roughening surfaces of old concrete floor/ roof/ terrace by picking and wire brushing the surface to remove the loose concrete, dust etc sweeping clean and washing down with water to remove dust, etc including removal of debris to a distance beyond 50 m out side MD land complete all as specified & directed.

Schedule of credit amount of Rs. 91,540.00 to be deducted during AOC

Sachdeva Enterprises

J.P ENTERPRISES

RP ANAND

Kirti Chandeliya and Assosicates

C L BHATIA

RAVI ENTERPRISES

Chetna Enterprises

M/S Modern builders

RAGHAVAY CORPORATION

Tiki Water proofing Co

M/s Ram Associates

M/s Shrangi Rishi Construction