Construction of Primary School building at Naroli (Remaining Work) (1st call)

Amount

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (D) By mechanical means in area of thorny jungle

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete (upto 10 ton)

Providing material and labour for laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)

Providing material and labour for applying exterior surface texture. `Heritage' of Bakelyte Hylam over [grit finish G-1987] Application of Heritage surface Texture grit finish consisting of a two component system of dry granite and acrylic polymer bonding agent mixed in proportion specified by the manufacturers. Thickness of individual grid to vary between 150 to 180 mm microns and applied thickness of dry coating being 1.5 mm. Application of grit finish shall be carried out by skilled labour specialized in the job and approved by Architect. Complete in all respects with necessary double scaffolding, curing etc. complete in all respect. ALL FLOOR UP TO HEIGHT OF BUILDING

Providing material and labour for fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length, 30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1cement :3 fine sand) etc complete. as per Engineer in charge.

Providing material and labour for fixing shot blasted paver block of M 300 grade of Super / Vyara / Duracrete 60 mm thick to be fixed on 35mm sand layer including joint filled up with coloured cement to match the shade of tiles and colour (in different colour combination) complete as directed by architect or engineering incharge.

Providing material and labour for Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.complete EIC

Providing material and labour for Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. inner side face complete EIC

Providing material and labour for Painting two coats (including priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including redoxide and cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing material and labour for applying a coat of textured finished on walls and column the rate shall be included scrapping, levelling, and preparing the surface primer coat+3coat of approved make, quality and shae shall be provided. complete EIC (Make specified as per appendix-1)

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688, @ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing M.S.grill made of Bright bar of required pattern to granite frames of windows/ Ventilation etc. with M.S. Flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Bright Bar Plan grill

Exposed brick cladding using exposed sand finished (traditional) cladding brick of approved make of size 225 x 65 x 30 mm fitting with this tile used to adhesive chemical and gouting the joints of exposed brick work having joints of 10mm width, (adesive and water) filler of desired shade with pointing exposed brick polishing, brushing and cleanig and after one Coat paint for approve water chemical etc Completed. including cost of scaffolding, curing etc. complete in superstructure upto all level as per drawing and design approved by architect / engineer

Supply fabricating and installation in position and testing galvanized MS gate of width 6m and height of about 2.1m out of channel joints, angles, flates, plates, pipes including stiffers, bracing, fabricated hinks, MS arrangement etc. including charge to be transportation, loading, labour, welding etc.complete to be EIC/as per drawing.

Providing and fixing in position callapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat of read lead paint. (more than 10 ton)

Providing & laying sandwitch Kitchen platform (sandwitch of 18 mm thk Granite/Kotah stone of approved shade of sandwitch type of required Top pattern stone sandwitch of 18 mm thk Granite of approved shade of approved shade and sample on top and 25 mm thk kota in bottom with 30 mm thk screed of (1:2:4) in between) with sandwitch supports of 25 mm thk two kota on sides and screed in between and 75 mm raised platform with kota on top as per design and approved sample for all floors / all levels / all heights. The rate includes cutting for sink, rounding, champhering and mirror polishing of edges, facias of granite, including necessary bonding adhesive like Araldite or equivalent. (Only plan area shall be measured and paid for). The rate includes rounding, champhering and mirror polishing of edges. Rate shall be exclusive of SS sink, , Piller tap, Bib tap-couplin etc. complete. A) 18mm thick Granite Top Sandwich type plateform( Granite Shall be approved shade by Architect /Consultants )

Providing material and labour for making GRANITE STONE COUNTER WASH BASIN of 0.60mt wide with vertical & Horizontal support of granite stone and having bottom Slab of 25mm to 30mm thick kadappa stone fixing with cement mortar 1:4 ( 1 cement :4 fine sand) and neat cement slurry as per requirement including cutting the granite stone & Providing & fixing oval shape wash basin 450 X 350mm in any colour in line & level of approved quality by engineer-incharge. All exposed Edges of granite should be moulded including all accessories , including providing & fixing flexible inlet pipe 15mm dia, C.P brass waste coupling 32mm dia, PVC waste pipe 32mm dia etc, CP Brass Pillar Cock 15mm Dia Heavy Duty Swan neck, with necessary couplings of approved quality, etc as directed by engineer in charge.

Providing material and labour for laying chequered terrazo tiles 22mm thick with marble chips of sizes upto 6mm in floors on 25mm thick bed of Lime mortar 1:1.5 (1-Lime putty : 1.5 coarse sand) or C.M. 1:6 (1 - cement : 6 - coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete. (B) Dark shades using ordinary cement (upto 10 ton)

Providing , fixing and Labour SS handle bar 32 mm Outer dia 600mm long with SS Screws ect. Completed as per direction of by Engineer Incharge

Providing and fixing Structural Glazing with Using the 17 Micron anodize of approved Colour alluminium Section as transium, mullium if size 63.5mm x 38.1 mm x 1.95 mm with using, 5mm reflective structural glass and fixed with silicone sealant and spacer tap and at corner sealed neoprene foam dust and Air sealed gasket mirred including scaffolding etc. complete with all necessary fitting and fixtures for openable window as per Architectural drawing and as directed by Engineer-in-charge.

Providing and laying River Wash Polished Granite stone Riser, Steeps & Top of Building Paraffit in required designand patterns, in linear as well as curvilinear portions of the building all Level complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:3 (1 cement :3 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, Moulding, Gru Cutting withcuring and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing material and labour for laying River wash kota stone slab 25mm thick in risers of steps, skirting Dedo and pillars laid on 25mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including groove and chember polished etc. complete

Grouting the joints of flooring and dedo tiles/kota stone having joints of 6mm width, using epoxy grout mix of 1.40 kg of organic coated filler of desired shade as per approval by Architect or onsite- authorised person.

Providing and fixing work for S S Mosquito net with Colour anodized aluminium sections fram of approved make . fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasts including necessary filling up of gaps at junctions, at top, bottom and sides . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing / panelling, stainless steel screws as per architectural drawings and the directions of Engineer-in- charge. With shutter frame of top member of size 40 x 18 x 1.29 weighing 0.547 kg of inclued alluminium colour anodized section and frames with necessary aluminium handles and locking arrangement etc. complete

Mirror Polishing on Kota stone work where ever required to give high gloss finish complete.

P/F wooden moulded beading to door and window frames with iron screws, plugs :- 2nd class teak wood : 12mm x 12 mm.

Providing Material and Labour for French spirit polishing includinng melament and PU polish Two or more coats on new works including a coat of wood filler

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like (upto 10 ton)

Providing and fixing puff panels for roofing sheet with all necessary fittings, accessories complete all as specified and directed by Engineer-in-charge.

PLUMBING Providing and fixing Urinal (Hindware 60022) approved quality etc.complete. (A) size 30 x 33 x 45 cm

Providing and fixing white vitreous china pedestal type water closet (Compact Wall Hung EWCs ) with PVC seat cover soft close with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Providing and fixing Pressmatrik Angle bib cock of following size. (A) Brass Angle bib cock polished bright. (i) 15mm dia. COMPLETE EIC/ARCHITECT(jaquar, CERA, etc) (jaquar-PRS-043)

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. (MAKE AS APPENDIXE-1) COMPLETE EIC/ARCHITECT

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. (MAKE AS APPENDIXE-1) COMPLETE EIC/ARCHITECT

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin. (MAKE AS APPENDIXE-1) COMPLETE EIC/ARCHITECT

LANDSCAPING & ROAD SITE TREE Providing and planting BRUSH TREE including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling. And making good as per landscape design plan. including cost of soil filling and size of 5' to 6'

Providing and planting TABEBUIA ROSSIA including excavation 450 X 450 X 450 MM, back filling, pest control treatment, leveling and making good as per landscape design plan . including cost of soil filling and size of 5' to 6'

Providing and planting KACHANAR including excavation 450 X 450 X 450 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling and size of 5' to 6'

Providing and planting PINK CASIA including excavation 450 X 450 X 450 MM, back filling, pest control treatment, leveling. And making good as per landscape design plan. including cost of soil filling and size of 5' to 6'

Providing and planting PINK BI FLORA including excavation 450 X 450 X 450 MM, back filling, pest control treatment, leveling. And making good as per landscape design plan. e.including cost of soil filling and size of 5' to 6'

Providing and planting KADAM including excavation 450 X 450 X 450 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling and size of 5' to 6'

Providing and planting FOX TEL PAM including excavation 450 X 450 X 450 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling and size of 8' to 10'

CARRY PLANTS Providing and planting EXZORA RED including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling and size of 1' to 2'

Providing and planting EXZORA PINK including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling and size of 1' to 2'

Providing and planting AKELIFA including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling and size of 1' to 2'

Providing and planting TIKKOMA GAURICHORI including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. excluding cost of soil filling 1' TO 2' FT

Providing and planting CHANDNI DRAFT including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling 1' TO 2' FT

Providing and planting CHANDNI BERICUT including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling 1' TO 2' FT

Providing and planting JET-ROPA DRAFT including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. excluding cost of soil filling 1' TO 2' FT

Providing and planting RAT RANI including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan excluding cost of soil filling 1' TO 2' FT

Providing and planting HAMELIA including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling 1' TO 2' FT

Providing and planting TIKKOMA CAPANSIA including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling 1' TO 2' FT

Providing and planting KARAN DRAFT PINK including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. excluding cost of soil filling 1' TO 2' FT

Providing and planting PARAS including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. excluding cost of soil filling 1' TO 2' FT

Providing and planting MADHUKAMINI including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan. including cost of soil filling 1' TO 2' FT

Providing and planting MOGARA including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT

HEDGES PLANT Providing and planting KADVA MEHDI including excavation 300 X 300 X 300 MM, back filling, pest control treatment, leveling and making good as per landscape design plan including cost of soil filling 1' . FT

Providing and planting PHYSUC including excavation 300 X 300 X 150 MM, back filling, pest control treatment, leveling and making good as per landscape design plan including cost of soil filling HEIGHT 1' FT(GREEN COLOUR)

PLAY EQUIPMENT Providing & fixing straight slide F.R.P play system of size :19 x 2 ft x 7 feet height all structure will be of heavy duty M.S. pipes and plates etc. complete as per specification of EIC. (Make specified as per appendix-1)

Providing & fixing double see-saw Size 8ft x 8ftx3ft height.It consists of follwong 4 nos. F.R.P. seats and all structure will be of heavy duty. M.S. pipe and plates etc. complete as per specification of EIC.(Make specified as per appendix-1)

Providing & fixing double swing of size 8ft x 6ft x 8ft.It consists of following 2 nos. canvas belt and all structures will be heavy duty M.S. pipes and plates etc. complete as per specification of EIC.(Make specified as per appendix-1)

ELECTRIC Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate, modules erected with necessary connection. As desired by Engineer In charge (3) Two Pin/RJ-11 Telephone Socket CAT III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (8) Modem Jack for Computer Open RJ-45 CAT IIISection 1-4 Mains & Wires

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections. [A] Conductor Size 0.5 mm (a) Unarmoured 2) Two Pairs CAT III

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [C] CAT - 6 CAT III Section :- 1- 3 / Conduits & Pipes

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge] CAT III

Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame. CAT III

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [D] 450 mm dia 900 RPM CAT III

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. CAT III

Supply and Installation of LED indoor Fixture with LEDs of wattage 0.2 watt and to 0.5 wattage assembly on single MCPCB, with housing used as a heat sink shall be made of thick sheet steel confirming to IS : 513 / CRCA polyester power coated and High U.V. & Corrosion resistance with diffuser and / or polycarbon optics with company mark. name 120 to 300 V, power factor more than 0.9 THD < 10% CCT 4000 K to 6500 K, uniformality ratio > 0.7, Luminier efficiency > 85 Lumen / watt, LED Draver Effinciency > 85%. 36Watt, Surge 4K, IP-20, 4 feet CAT III

LED panel light with provision for plane front frame with translucent cover fixed to housing complete. 18 to 20 watt CAT III

LED Lamp Intergral type, cool white with PC diffuser suitable for B22 Lamp Holder 5 to 8 watt CAT III

Street Light IP-65, Surge 4KV, Alluminium Die cast, 130 Lm / watt, 24 to 36 watt CAT III

Supplying and erecting approved make, watertight, integral flying saucer type post top lantern , suitable for 40Watt LED lamp, with Driver and all housing ignitor, lamp holder, canopy and other necessary accessories. CAT III

Supplying & erecting IP 55 grade 150 x 90 x 75 cms section pillar fabricated from 14 Gauge thick joint less M.S. Sheet with angle iron legs 95 cms long made from 40 x 40x 6 mm thick. Jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work Uniform Until erected with cement concrete foundation and 45 cms high bricks work finishing with plaster etc. hinged double door with 4" x 6" vision panel covered with Mesh & V. panel overlapping with flap for meter reading internally supported on both side, CAT III

Supplying & erecting approved make time switch with single pole airbreak contacts suitable for 230 V.15/16A. complete with self starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during each 24 hours, With nickel cadmium rechargeable battery backup erected as directed. CAT III

Providing and erecting, heavy duty flood light integral luminaire comprises die cast aluminium body with heat resistant toughened front glass, silicon rubber gasket, anodised reflector hot deep powder coated cradle clamp with suitable size of necessary built in control gear complete with lamp. (B) 90 watt LED CAT III

Supplying Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approved paint to be erected on / in existing Foundation. The length of poles are as below. (A) 7.5 mtr. Long Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base plate. (Approximate Pole weight 67 Kg) For burial erection

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T., OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Supplying & erecting energy saving Energy Efficient 18 watt fitting with T-5 LED tube complete with electronic inbuilt circuit ballast of rating 130 to 325 V A.C. CAT III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables CAT III (H) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

(G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

(F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

(B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables CAT III (e) 4 core 25 Sq. mm

(c) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable CAT III. (a) 3 core 2.5Sq. mm

(a-1) 3 core 4 Sq. mm

(b) 3 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. CAT III (H) 3 & 1/2 core 240 Sq. mm

(G) 3 & 1/2 core 185 Sq. mm

(F) 3 & 1/2 core 150 Sq. mm

(B) 3 & 1/2 core 35/50 Sq. mm

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. CAT III (e) 2 to 4 core 16 Sq. mm

(d) 2 to 4 core 10 Sq. mm

(c) 2 to 4 core 6 Sq. mm

(b) 2 to 4 core 4 Sq. mm

(a) 2 to 4 core 2.5 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. CAT III (K) 240 Sq.mm.

(J) 185 Sq.mm.

(I) 150 Sq.mm.

(E) 35/50 Sq.mm.

(D) 25 Sq.mm.

(B) 10 Sq.mm

(C) 16 Sq.mm.

Supplying & erecting recess wall mounting speaker with 5W rated input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or ceiling of following size. (b) Square shaped 260 x 260mm size speaker CAT III

Supplying & erecting Philips Ahuja make Booster Amplifier having power output of 25OW (RMS,), suitable to obtain combined power output of two, with 6 mike inputs & suitable to be used independently as a 250watt amplifier in combination with mike & mixer. The booster Amplifier shall be without mike & Aux. input channels, The system shall be suitable to operate on 24OV. A.C. & 24 Volts D.C. Battery. CAT III

Providing and erecting 3 star and above rated approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) CAT III (A) for 1.5 ton capacity

Providing and erecting 3 star and above rated approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) CAT III (B) for 2 ton capacity

Supplying & Installing M.S. powder coated standard type stand mounting for outdoor unit of Split A.C. up to 2TR Capacity, erected with necessary hardware materials as directed.

Extra charges for the Items beyond standard length For Single phase Split A.C. Machine insulated pair of soft, copper tubing including power and control cable up to 2 TR capacity

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.(A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use (i) with 350mm depth

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with Aluminium busbar having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulation tape for phase sequence, three phase & neutral each Suitable for following current capacity with necessary painting mounted on wall or pedestal frame of required size with necessary connections. CAT III(C) Suitable for 300 Amp. Capacity

Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 50 K.A. at 415V. having normal current rating up to 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. CAT III

Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415 V having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. CAT III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity CAT III (c) 63 Amp.

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA at 415 V having Normal current rating up to 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections & complete erected in existing 16 G.M.S. housing. CAT III ICS=100% of ICU only Cat III

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. CAT III

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. CAT III [C] 50 Ltr / Hr with 250 psi 2 nos booster pumpNON SOR Item

R-Y-B INDICATING LAMP WITH FUSE

MULTI FUNCTION METER conserv make with kwkva kvar kwh p.f. V Aetc. parameters with RS 485 port

M/s Shantilal B. Patel