Graam isaravaar pitch road se paal bastee tak interlocking nirmaan kaary.

Construction of subgrade and erthen shoulder with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.2 with a lead upto 1000 m as per Technical Specification Clause 303.1

Excevation in foundation in mixed soil I/C filling lift up to 1.50 m & lead up to 30 m & also I/C filling, watering & ramming of excavated earth into the trenches etc. complete of work. SI No 252

Concrete with 4cm. Gauge Stone ballast, coarse sand and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials labour and tools and plants etc. required for proper completion for the work S.I. No-273

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

M-150 Class B/W in 1:4 cement & C/S mortar in foundation and plinth I/C S/O all materials labour, T&P etc complete of work. SI No 305

Providing & Laying of Interlocking concrete block pavement having thickness 80 mm I/C levelling and dressing of surface to require level & slope spreding and moisturing 30mm thick.local sand on bend ,filling joints with local sand etc. complete of work.as per sor 20020 chp 8 D NS GREY INTERLOCKING

Providing & Laying of Interlocking concrete block pavement having thickness 80 mm I/C levelling and dressing of surface to require level & slope spreding and moisturing 30mm thick.local sand on bend ,filling joints with local sand etc. complete of work.as per sor 20020 chp 8 D NS RED INTERLOCKING

12mm thick plaster with 1:4 cement & C/S mortor thickness not to be less than 10 mm I/C completie of work. SI No. 584

Laying cement concrete PCC road with 2cm gauge approved stone ballast approved coarse sand and cement in the proportion of 1:2:4 incliding supply of all materials labour and T and P etc required for proper completion of work . 279(b)

Painting or varnishing new iron work in small area or new wood with two coat of redy mixed priming paint and two coat of aproved superior quality ready mix paint (2nd quality synthetic enamel paint of approved brand such as British paint shalimar,Ashian,or equivalant as approvedby E/I)or varnish including supply of all material labour ,T&P etc. required for proper complition to the work paint to be used confirm the I.S.I. No 103-1950 S.I.NO-641above but for every coat after frist coat S.I.NO-641+642