SPECIAL REPAIR TO BUILDING NO TWG199 AND PROVN OF LT VEH PARKING GARAGE NEAR ADM BLOCK AND EXCHANGE OF 190 MTN BDE AREA UNDER GE TAWANG

Amount

Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) exceeding 1.5 sqmtr but not exceeding 4 sq m each, complete all as specified and directed.

Dismantling timber scantlings 50 mm thick and over in section, in any position, complete all as specified and directed.

Dismantling of timber boarding, any description, fixed in any position with nails complete all as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed.

Dismantling carefully framed truss of span not exceeding 10 m, keeping aside for reuse complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out hard/dense soil.

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m in hard/dense soil complete all as specifed and as directed.

Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.

Materials and Labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface.

Materials and Labour for Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified.

Materials and Labour for plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Materials and Labour for plain cement concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

Materials and Labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. all as specified and as directed.

Materials and Labour for formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

Materials and Labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed

Materials and Labour for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed

Materials and Labour for reinforced cement concrete 1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under reamed pillars and mass concrete complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)

Materials and Labour for reinforced cement concrete 1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in column, pillars, piers, post and struts complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)

Materials and Labour for reinforced cement concrete 1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)

Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Materials and Labour for TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Materials and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

Erection and fixing of old steel work in tubular trusses including special shaped washer etc. complete all as specified and directed.

Supplyn& fixing Mild steel screw bolt not exc 12 mm dia neck, purpose made with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 30 cm long complete all as specified and as directed.

S&F for Boarding supplied and fixed with nails in any situation 50 mm thickness complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.

Materials and labour for preparing of new wooden surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M & L preparation of new plastered surface of wall & applying two coats of cement based paints on one coat cement primer complete all specified and directed.

M & L for applying two coat of Distemper oil emultion ,on one coat alkali resistant priming paints on new wall surface including preparetion of surface complete all as specified and directed

Preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes/tiles , complete all as specified and directed.

Materials and Labour for 10 mm thick screeding of cement mortar (1:4) for laying vertical surface finish, complete all as specified and directed.

Materials and Labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

Materials and labour for Coloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

Materials and labour for providing Virified Ceramic tiles 10 mm thick (square/rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Materials and labour for 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggt as in sub bases of floor finished even and smooth without using extra cement, complete all as specified and directed.

Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection etc. finished the surface of concrete fair and even, complete all as specified and directed.

Material and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100 mm thick slab

Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.

Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , exceeding 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.

Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , 10 cm in width and setting in mortar(1:4) as in wall complete all as specified and directed.

Materials and labour for 150 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, finished the surface of concrete fair and even, complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

Supply and fixing second class hard wood plain solid straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

Supply and fixing 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

Supply and fixing 30mm thick second class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.

Supply and fixing Mild steel butt hinges, medium weight, cold rolled 100 mm size , complete all as specified and directed.

Supply and fixing Mild steel butt hinges, medium weight, cold rolled 75 mm size , complete all as specified and directed.

Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed.

Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed.

Supply and fixing Aluminium handles, cast type, anodized, 125 mm size , complete all as specified and directed.

Supply and fixing for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick sorrounds, glaze with putty or fixed with beads complete all as specified and directed.

Supply and fixing 6.3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.

Materials and labour for second class hard wood plain fillets. square, rectangular or triangular in section, wrought, secured with nails or brads of sectional area exc 3 sqcm and not exc 6 sqcm complete all as specified and directed. .

Supply and fixing Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Materials and labour for rendering 15mm thick in cement morter (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Materials and labour for rendering 10 mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Materials and labour for applying three coats of white wash on new wall surface over primer including preparation of surface, complete all as specified and directed.

Supply and fixing 4mm thick Plywood, grade BWR, type BB, fixed with nails to timber framework as in ceiling etc complete all as specified and directed.

Supply and fixing stainless steel sink 1 mm thick for kitchen with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling complete all as specified and directed.

Supply and fixing Vitreous China wash down water closet pan (pedestal pattern), white with "P" or "S" Trap front or back inlet fixing bolts, PVC seat cover complete and making all necessary connection as specified and directed.

Supply and fixing 10Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.

Supply and fixing 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

Supply and fixing in repairs, cromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed. ( Note: Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer-in-charge).

Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 630x450mm with coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets white incl 32/40mmdia 90cm long PVC waste down pipe, complete all as specified and directed.

Supply and fixing for 125/110 bore PVC (SWR) 'P’ trap, complete all as specified and directed.

Supply and fixing for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.

Supply and fixing PVC (SWR), junction single, (Single T) equal or unequal 110mm bore with access door, complete all as specified and directed.

Supply and fixing Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

Supply and fixing Soap dish, viterous china white appx size160x160x90 mm complete all as specified and directed.

Supply and fixing in repair, Toilet paper holder, viterous china, box type fixed to walls with chroium plated (CP) brass screws complete all as specified and directed.

Supply and fixing in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 110mm bore, complete all as specified and directed.

Supply and fixing Brass CP mixer for mixing hot & cold water screwed down for iron pipe of 15 mm bore and fixed in position complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing caping of suitable size on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.One light/fan/bell point controlled by one switch one way 5 Amps

All as per Item No.91 above but for One 2/3 pin socket outlet 5Amps on independent board

All as per Item No.91 above but for One 2/3 pin socket outlet 5 Amps on the same board with other switches.

All as per Item No.91 above but for One bell/buzzer point controlled by one bell push switch.

All as per Item No.91 above but one switch socket combination 15 Amps on independent board with 2 run of cable 4 sq mm size and one run of earth wire 4 sqmm

Supply and fixing Switch piano, flush type, single pole, one way switch 5 Amps.

Supply and fixing Switch socket combination 2 in 1, 5 Amps flush type.

Supply and fixing Switch socket combination multipurpose 15 Amps,5 in 1, 240 V flush type.

Supply and fixing Ceiling rose surface bakelite 3 terminals 65x50mm all as directed.

Supply and fixing Buzzer, Ding Dong AC, 230 volts, single pole complete all as specified and as directed by Engineer-in-Charge

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-charge. ( Make : Crompton. Cat No-LCTLRNE-36-FO-CDL or equivelent of Bajaj/ Havells )

Supply and fixing street Light fittings 35 watts, pressure die cast housing with integrated lences, high power, IP 65/66 protection complete all as specified and as directed. Make :Crompton. Cat No- TRP-400-35-57-SL-LM-NSR or equivelent of Bajaj/Havells

Supply and fixing house service bracket (hook type) for service connection, complete with 3 m long GI pipe, 40 mm bore, medium grade, with two nos 90 deg bends, MS hook and stay or guy complete all as specified and as directed.

Supply and fixing Lamp holder angle type made of PVC/Polycarbonate with back plate.

Supply and fixing LED bulb 9 watts . Make : Havells. Cat No-LED ADORE 9W B22 WW 2 STAR LAMP or equivelent of Bajaj/Philips/Crompton.

Supply and fixing decorative 20 Watt LED lighting fittings, fixed to walls/ceiling, environmental friendly, energy efficient ready to use pack . Make : Crompton. Cat No-CCS-100-20-65-HL2-DP-NWH or equivelent of Bajaj/Philips/ Havells

Supply and fixing decorative wall light fixture made up of polycarbonate, suitable for 9/10 w retrofit LED lamp B22 base complete all as specified and directed by Engineer-in-Charge. Make : Havells. Cat No-LHDL02160099 or equivelent of Bajaj/Philips/Crompton.

Supply and fixing Modular Bell Push 6A,1 module complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Modular switch 1way 6A,1 module, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Modular switch 1way 15 A,1 module, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Modular socket, 6A-2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing i Modular socket, 16A-2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-charge.

M&L of circuit/submain wiring alongwith earth wire with the size of 2x4 sqmm + 1x4 sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping of suitable size complete fixing on wall,roof and floor all as specified and directed by engineer-in-charge.

Supply, fixing and connecting exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and as directed.

Supply and fixing MCB distrubution board SPN 8way double door, sheet steel,phosphatised,powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V ,complete all as specified and directed. by engineer-in-charge.

Supply and fixing MCB distrubution board TPN 6 way double door, sheet steel, phosphatised, powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V complete all as specified and directed by as engineer-in-charge.

Supply and fixing MCB Single pole, 240 volts 6 to 32 Amps 10 KA rupturing capacity, C series

Supply and fixing MCB Single pole & neutral 240volts 40 Amps, 10KA rupturing capacity, C series

Supply and fixing MCB TPN 240volts 100 Amps, 10KA for incoming complete all as specified and directed.

Supply and fixing MCB TPN 240volts 63 Amps, 10KA for outgoing complete all as specified and directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable XLPE insulated, armoured aluminium conductor of cross sectional area 10 Sqmm 4 Core as in sevice connection complete all as specified and directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner shethering of PVC tape armoured with galvanised steel wire or tape and overall PVC shetered 10 Sqmm 2 Core nominal cross section in sevice connection complete all as specified.

Supply and fixing modular metal flush box 3 module ISI marked complete all as specified and as directed.

Supply and fixing modular metal flush box 4 module ISI marked complete all as specified and as directed.

Supply and fixing modular metal flush box 6 module ISI marked complete all as specified and as directed.

Supply and fixing modular white cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fixing modular white cover plate with frame, 4 module ISI marked complete all as specified and as directed.

Supply and fixing modular white cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Materials and labour for earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply and fixing earth continuity conductor or main earthing lead of 4mm dia galvanized iron or steel wire fixed to wall on battern or recess or chases or buried in ground or drawn in conduit pipe/casing capping or fixed to pole or any other Indicated situation for loop earthing etc as required.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, 240 volt complete all as specified and directed

Materials and labour for GI pipe light grade with all fittings for 32 mm bore of pipe laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable complete all as specified and directed.

Supply and laid in trenches double walled corrugated HDPE pipes of inner dia 38 mm and outer dia 50 mm, as in cable protection work, complete all as specified and directed.

M/S TSERING DHONDUP

M/S ACE BUILDERS

M/S K D CONSTRUCTION

M/S TARAYANA BUILDERS

M/S T D Enterprises

M/ S N T ENTERPRISES

M/S L G BUILDERS