Construction of Libray Building for magasvrgiya students at G.P.Dhanora tq.Ashti Dist-Beed

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Spec. No. Bd.A.1 Page No. 259, SSR I.No.21.02 P.No.153

Excavation for foundation in hard murum including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete.(Liftupto1.50 m) By Mechanical Means, Spec.Bd.A.2 Page One Number 259,SSR item No.21.06, Page 153

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete.As directed by Engineer in charge.SSR I.No.21.40 P.No.157

Providing and laying in situ / ready mix cement concrete of M10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compact ing and curing etc. complete. (with reversible drum type mixer / concrete batch mix plant (pan mixer )) wi th SCADA wi th Natural / VSI standard Artificial Sand) Spec. No. CD.-3 Page.No. 160.SSR I.No.11.02 P.No.81

Providing and laying in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. work in foundations like raft , strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Spec. No. Bd.F.3 Page No. 298 and B.7, Page No.38, SSR I.No.25.11 P.No.178

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compact ion finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand Bd.F.5 Page No.300 and B.7,Page.No. 38.SSR I.No.25.31 P.No.179

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand .Bd.F.6 Page No.300 and B.7,Page No.38. SSR I.No.25.50 P.No.181

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Spec. No. Bd.F.8 Page No.302 and B.7,Page No.38.SSR I.No. 25.70 P.No.182

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Spec. No. Bd.F.9 Page No.303 and B.7,Page No.38. SSR I.No.26.05 P.No.184

Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ quartzite/ granite/ gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Spec. No. Bd. F. 13 Page No. 305 /I.S.456 (2000. SSR I.No.26.25 P.No.185

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306.SSR I.No. 26.33 P.No.188

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/ Rmt . with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/ Rmt .. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/ Rmt . The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/ Rmt . Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/ Rmt . and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/ Rmt . As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. With powder coating with box. Spec. No. As directed by engineer incharge. SSR I.No.39.43 Page 254

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, rakingout joints on exposed faces and watering etc. Complete. Bd.G. 1 Page No.313. SSR I.No.27.01 P.No.197

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No. Bd.A. 11 Page No.262..SSR I.No.21.36 P.No.157

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263.SSR I.No.21.37 P.No.157

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. Spec. No.Bd.G.5 Page No.315 .SSR I.No.27.05.No.197

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.. Bd.G.7 Page No. 316.SSR I.No.27.06 P.No.197

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No. Bd T 34, Page No. 499. SSR I.No.39.09 P.No.246

Providing and fixing fiber glass reinforced polyster door shut ter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) wi thout ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. As directed by engineer incharge. SSR I.No.39.58 P.No.257

Providing and laying telephone black / Amba White / Cadburybrown / Rubyred / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. As directed by Engineer In Charge. SSR I.No.33.68 P.No.220

Providing and fixing mild steel grill work for windows, ventilators etc. 15 kg/ sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No. : Bd.U. 1 Page No. 537. SSR I.No.40.02 P.No.264

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No. As directed by Engineer in charge. SSR I.No.39.68 P.No.259

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. Bd.L.1 Page No. 367. SSR I.No.32.02 P.No.209& For neru finish I.No. 32.15 P.No.210

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No.368. SSR I. No. 32.03 P.No. 209 + for neeru I.No.32.15 P.No.210

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Bd.L.4 Page No.368. SSR I.No.32.06 P.No.209 + for neeru I.No.32.15 P.No.210

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Spec. No. Bd.L.7 Page No.369.SSR I.No.32.11 P.No.209

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection up to the outside face of the wall. Spec. Bd.V.23 Page No. 562 SSR I.No.41.57 P.No.271

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float , filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385. SSR I.No.33.42 P.No.217

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float , filling joints, curing and cleaning etc. complete. b) Skirting. Spec. no. Bd.M.12 Page No. 385. SSR I.No.33.43 P.No.217

Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black/ AmbaWhite /Catbary brown/ RBI red/ Ocean Brown granite stone for treads and risers of steps and stair cases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete..Spec. NoBd. M.22B/Page One Number 390 SSR I. No.33.35 Page 216

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete . Spec. No. Bd.V.5 Page No.551. SSR I.No.42.59 P.No.280

Providing and fixing frame with/ without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron hold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete.Spec.As directed by Engineer in charge,SSR item 39.02, page 245

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat .) etc. complete. Spec. No. Bd.P.5 Page No.413. SSR I.No.36.11 P.No.227

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary,cleaning and preparing the surface, watering for two days etc. complete.spec.Bd.0.8 Page One Number 406, SSR Item. 35.13, Page 224

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.Spec. No. Bd.V.30 Page No. 565. SSR I.No.41.63 P.No.272

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete Spec. No. :As directed by Engineer In Charge. SSR I.No.42.28 P.No.277

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No. As directed by Engineer in charge. SSR I.No.42.33 P.No.277

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Bd.V.8 Page One Number 554. SSR I.No.41.40 P.No.270

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Bd.V.8 Page One Number 554..SSR I.No.41.41 P.No.270

Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. Spec. No. Bd.V.9 Page No.555. SSR I.No.41.43 P.No.270

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soilvent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent , clamps etc. complete. Spec. No. As directed by Engineer in charge..SSR I.No.42.52 P.No.279

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet ,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. Spec. no. As directed by engineer in charge. SSR I.No.42.53 b P.No.280

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The cont ractor shall give 3 yrs guarantee bond for payment ) SSR I.No.42.87 P.No.283

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float , filling joint with cement slurry cleaning curing etc. complete. Bd. M12 page No. 385.SSR Item I.No.33.67 P.no.220

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd.M.13 Page No. 386. SSR I.No.33.26 P.No.215

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. completeProviding and laying in trenches 25 mm dai . CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.BD.V 5 page 551 and as directed byEngineer in charge . SSR I.No. 42.57 P.No.280

Providing and fixing in position UPVC ult ra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete. Spec. No. : As directed by Engineer in charge.SSR I.No.43.25 P.No.290

Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mor tar 1:3 curing and cement etc. complete. b) Both side polish. Spec. No. Bd.M.35 B/P No.393 SSR I.No.33.33 P.No.216

Providing and laying in trenches 20 mm dai . CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge SSR I.No.42.62 P.No.281

Providing and fixing 15mm diameter concussion push button type brass/ gun metal self-closing tap including necessary socket complete. Spec. No. Bd.V.14 Page No. 557, SSR I.No.41.52 P.No.270

Providing & Fixing in position, 12mm wp Ply wood & 1.5mm laminate panels above the fabricated frame on one side , as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete.As directed by Engineer-incharge SSR I.No.51.15 Sr.No.1820 Page No.343

providing Plastic Mango Chairs with cushion from open market /company including quality and with test report /ISI marked