SPL REPAIR TO BLDG NO E-44 SHAHBAAZ AUDITORIUM AT AREA-II UNDER 36 ROU

Amount

Dismantling of wall ceiling board (fibre, pulp, insulation etc) or insulation board/ slab/ blankers, any thickness, with cover fillets including any type framework complete all as specified and directed.

Dismantling framed timber scantlings in fillets, rails, posts, rafters, purlins, etc., under 40 sq. cm in section, in any position.

Dismantling boarding, any description, fixed in any position with nails

Dismantling of floor, hearth or wall tiles/ terrazo including cement mortar bedding, removal serviceable tiles to store and rubbish off the premises, all as specified and directed.

Demolition of brick work or stone/ boulder masonary, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) exc 1.50 but n exc n.exc 4 Sqm each complete.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) n. exc 1.50 Sqm each complete.

M&L for non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, over and incl 15mm thick screed bed or beding layer in cement mortar (1:6).

M&L for glazed ceramic tiles of size 600x 300 x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over 10 mm thick rendering in CM 1:4 complete .all as specified and directed by engr-incharge.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed by engr-incharge

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21

S&F 150 mm long aluminium handles cast type anodised etc all as specified.

S&F Aluminium handles 100mm size, cast type, anodised

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm filled with PCC 1:3:6 type C0 all as specified and directed.

S&F 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-incharge.

S&F in repairs half stall urinal Make: prayag cat no 4998 or equivalent as approved by the GE.

S&F 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of the slabs etc all as specified and directed.

S&F in repairs 75mm out let PVC (SWR) floor trap with cp gratting incl jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Taking up or down steel tubing and connections, incl cleaning for refixing or removal to store bore of Pipe 15mm.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, sheves, lintels, etc, and cutting chases for concealed water tubing and making good, cutting n exc 10cm girth.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore.

S&F in repairs wash basin with 32mm waste pipe and 32mm dia waste coupling PTMT with long shanks and fly, flange end. Make Prayag cat no 4709 or equivalent as approved by the GE.

S&F in repairs pillar cock mounted over wash basin with all fittings complete all as specified by Eng-in-charge Make: Prayag cat no 7702 or equivalent as approved by the GE.

S&F in repairs pedestal for wash basin round full size all as specified and directed by engr in charge Make: Prayag cat no 4661 white or equivalent as approved by the GE.

S&F in repair CP soap dish fancy type of approved quality fixed in repairs. Make: Prayag or equivalent as approved by the GE.

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, ‘D’ type 60 cm long between flanges in repair complete all as specified. Make: Prayag or equivalent as approved by the GE.

S&F in repair angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified. Make: Prayag cat no 7710 or equivalent as approved by the GE.

S&F in repairs PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified.

S&F in repair bib taps 2 way double handle with flange fancy type chromium plated cast copper alloy with crutch or butterfly handle screwed down, screwed for 15mm dia complete all as specified. Make: prayag Cat No: 7312 or equivalent as approved by the GE.

S&F in repair bib taps with flange fancy type chromium plated cast copper alloy with crutch or butterfly handle screwed down, screwed for 15mm dia complete all as specified. Make: Prayag Cat No: 7306 or equivalent as approved by the GE.

S&F in repairs vitreous china European type WC with and including UF soft close seat cover , CP jet, 45 cm long PVC pipe and connection and making the system fully functional and leak proof by providing 'M'seal on out let of flush pipe and out let of WC seat to the entire satisfaction of engr-in -Charge. Make: Prayag Cat No: 4016, 511 or equivalent as approved by the GE.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests incl flush pipe, provn of lime concrete bedding complete.

S&F 10 ltrs capacity PVC low level flushing cistern(dual 5ltr/10ltr) valve less white or coloured with intel, bal valve floot and handle incl brackets Make: prayag cat no 504 ref prayag rate list 1 march 2018 or equivalent as approved by the GE.

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge. Note: Al. section thickness shall not be less than1.50 mm.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with adhesive joints, laid in trenches or in floors.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with adhesive joints, fixed to walls.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with adhesive joints, laid in trenches or in floors.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with adhesive joints, fixed to walls.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 75mm bore PVC (SWR) bends any radius.

S&F 110mm bore PVC (SWR) Junction single, (Single T) equal or unequal.

S&F 75mm bore PVC (SWR) Junction single, (Single T) equal or unequal.

S&F 110mm PVC (SWR) vent cowl.

M&L for 18/19mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type `BB', fixed with screws to timber frame work.

M&L for two coats lacquer polishing on wooden surfaces of any description, width or girth of door ,window frame or panels including removal of old treatment on old surface with suitable treatment all as specified and directed by Engr-in-charge.

M&L for two coats lacquer polishing on wooden surfaces of any description, width or girth of door ,window frame or panels on new surfaces including treatment of surface with suitable treatment all as specified and directed by Engr-in-charge.

M&L for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 250 & n exc 500 litres all as specified and directed

M&L for PCC ( 1: 2: 4) type B-0 using (Using 12.5mm graded crushed stone aggregate) etc on roof top as a leveling course/ padding to maintain the slope, finished the surfaces even and smooth without using extra cement etc.

M&L for Brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth etc.

M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cment. Note: WPC shall be paid measured & paid seperately under respective item.

Supply only WPC

M&L for preparation of new plastered surface and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed by Engr-in-Charge. Make: Asian ACE or equivalent or equivalent as approved by the GE.

M&L for complete removal of existing treatment mechanically and applying birla/ J. K. wall care white putty 3 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of synthetic distemper over a coat of wall primer incl. preparation of old surfaces of walls etc complete.

M&L for 2nd class hard wood, Plain fillets, square, rectangular or triangular in section, sectional area exc 13 and n. exc. 25 sqcm, clean sawn, secured with nails or brads,

M&L for perforated particle board/tiles 18/19mm thick for insulation and accoustic purposes,60x60 cm in size fixed with nails to timber frame work or with staples on snap grid including two coat of distemper over primer.

M&L for fixing of armstrong mineral fibre acoustical suspended ceiling system with dune supreme (Beveled Telgular) Edge tiles with armstrong silhouette black reveal 15mm exposed grid ,tiles should have humidity resistance (RH) of 99%,NRC 0.5 ,Light reflectance >83% ,Thermal conductivity K=0.052-0.057 w/m K ,colour white ,fire performance UK class 0/class 1 (BS 476 pt-6&7) in module size of 600x600x15mm with bio block coating on the face of the tile ,suitable for green building application ,with recycled content of 38-41% .The tile shall be Armstrong silhouette black reveal profile grid system with 15mm white flanges incorporating a 6 mm central reveal in white /black and with a web height of 38mm and a load carrying capacity of minimum 15.68kgs/M2 .Silhouette ,main runners &cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions .The T section have a Galvanizing of 90 grams per metre square .The tile and grid system used together should carry a 15 year warranty.All as specified and directed by engr-incharge Installation :To compose main runner spaced at 1200 mm centre securely fixed to the structual soffit using suspension system at 1200mm maximum centre .The first /Last suspension system at the end of each main runner should not be graeter than 450 mm from th adjacent wall .Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600mm module ,cut cross tees longer than 600mm required independent support 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m m height etc .

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab ,complete all as specified and directed.

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:-

The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing treatment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10%) high density polyethylene sheet ( HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc.

Taking down main switch, DB/ VTPN/ MCCB, AC box of any capacity.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified all as directed by Engr-in-charge Make– Havells/ Finolex/ Polycab

For one light/ fan point controlled by one switch

For one 3 pin, 5 Amp independent socket point controlled by one switch

For one 3 pin, 5 Amp socket point with other switch on the same board

Ditto all as per item No 68.00 here in before but for power point wiring using with 2.5 sqmm PVC-FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated, unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified.

S&F Modular switch, one way, 6 Amp 230, 1 module. Make- Havells Athenea / L&T/ Schneider

S&F socket Modular 6 Amp-2/3 pin combined 2 module Make- Havells Athenea / L&T/ Schneider

S&F switch Modular, single pole, one way,16 Amp 230 Volt Make- Havells Athenea / L&T/ Schneider

S&F modular socket 6/16 Amp,2/3 pin combined 2 module 230 Volt complete. Make- Havells Athenea / L&T/ Schneider

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal. Make- Havells Athenea / L&T/ Schneider

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting with 9 watt LED bulb. Make- Havells Athenea / L&T/ Schneider

S&F modular fan step regulator 120W, 2 module. Make- Havells Athenea / L&T/ plaza

M&L for LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness. Make: Havells Cat Part No LHEXBLP7PN1W020, 4 feet or eqvt in Phillips/ CG.

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make:- Legrand/ L&T/ Havells

S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make:- Legrand/ L&T/ Havells

Ditto all as per item no 79.00 herein before but SPN 63 Amps, 240 V. Make- Legrand/ L&T/ Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/ L&T/ Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/ L&T/ Havells

S&F double door metallic sheet metal enclosure for DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 08. Make- INDOASIAN/ L&T/ Havells

S&F testing and commissioning of TPN 63 Amp 415 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make- Legrand/ L&T/ Havells

S&F double door metallic sheet metal enclosure for DB double door (DPX-125 ) VTPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 08. Make- INDOASIAN / L&T/ Havells

S&F MCCB 63 Amps 4 pole, 415 V 16 KA. Make- INDOASIAN / L&T/ Havells

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sqmm cable as continuous earth lead complete all as specified. Make– HAVELLS/ FINOLEX/ Polycab

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm cable as continuous earth lead complete all as specified . Make– HAVELLS/ FINOLEX/ Polycab

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 1.5 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 1.5 sqmm cable as continuous earth lead complete all as specified. Make– HAVELLS/ FINOLEX/ Polycab

S&F box type LED mirror optic fitting 1x9 Watt 2 feet box type complete .Make:Havellls /Wipro/CG ll as specified and directed by Engr -in -Charge

S&F 2' X 2' ultra modern recess mounting luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling with electronic driver complete all as directed by engir-in-charge . Make- Havells cat part no PLANO2X2PLR36WLED857S/ BAJAJ cat part no BZRSQL 36W GZi WH LED/CG

S&F SPARKLE PRO ADJUSTABLE 08 watt warm white Recess mounted adjustable LED down/ lighter with made of extruded aluminium housing and high power LED as a light source with clear diffuser with eectronic driver 15 Watt Make- Havells Cat Part No ENDURANEOSURFACEDLS15WLED840S or eqvt make in Bajaj/ CG

S&F LED flood light fitting 70 Watt (JETA NEO 70) IP 65 High efficent tuffen glass including provision of weather proof PVC insulated copper conductor cable 1.5 Sqmm, 2 core as required complete all as specified and directed. Make- Havells Cat Part No JETANEOFL70WLED757LTG or equivalent make in Bajaj/ CG

Taking down and re-fixing of ceiling fan/ wall mount fan and exhaust fan complete all as specified and directed.

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

S Balwinder Singh