Renovation work of BC Hostel in Ramnarayan Yadav Memorial college Barhi Block Barhi Dist Hazaribag

Amount

Providing two coats of oil bound distemper of approved shade and make over old surface including washing, cleaning and papering the walls, scaffolding, washing of floors and taxes, all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. basic Rates 115.15

Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 35 mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Providing and laying polished vitrified floor tiles in different sizes make in all colours and shades laid on 20 mm thick cement mortor (1:4) including grouting the joints with white cement and matching pigments with complete job(600 x 600mm)

Providing and laying polished vitrified tiles in different sizes with water absorption less than 0.08% and make in all colours and shades in skirting , riser of steps over 12 mm thick bed of cement mortor (1:3) including grouting the joints with white cement and matching pigments with complete job (600 x 600mm)

Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st qualityconforming to IS : 15622, of approved make, in all colours, shades, exceptWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing primer one coat of red lead paint ofapproved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.

Providing and laying APP (Atactic olypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical andchemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering-All work up to plinthlevel 1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stoneaggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

supplying fitting fixing 19 mm thick ply board in bed base100 Bed

unskilled labour

carpenter

Carrage of Materials(A) Sand av lead 5 K M

(B) Bricks av lead 15 K M

( C ) Chipes av lead 15 K M

( D ) Metal av lead 15 K M

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wallsProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,15 mm nominal dia Pipes

20 mm nominal dia Pipes metre

25 mm nominal dia Pipes metre

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved do-do-all complete job.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(A) 580 mm. long Common Toilet(a) With high level C.I. cistern

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 225 mmKitchen 1 no

Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job250 mm thick wall

Providing and fixing Gun metal full way valve of approved quality with complete job25 mm dia

Providing and fixing PTMT grating of approved quality and colour ,Circular type 25 mm nominal dia with 25 mm waste hole

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

roviding and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 15 mm size C.P. brass pillor cock C.I. body brass spindle pillor cock with complete job(C.I. Body brass spindle)

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l. (a) (i) 600 x 125 mm glass self complete

(b) Mirrors of 6 mm thick with plate glass bevelied edge mirror imcluding C.P.brass revolving fittings ply wood board and C.P.Hinges to fix with mirror (600 mm x 450 mm size)

(c) 600x20 mm C.P. towel rail

(c)iii C.P. brass liquid soap container

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee without door

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size PVC/ G. I. box etc. asGroup C

Power plug wiring in PVC conduit ( 2 x 4 sq. mm):-Wiring for light / power plug with 2 x 4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1 Nos. 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Twin Control point wiring in PVC conduit, with modular type switch:-Wiring for Twin Control light point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, 2 way modular type switch, modular plate, suitable size PVC/ G.I. box etc. as required.

Supplying and fixing following modular type switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 5/6 amps, two way switch

5/6 amps, 3 pin socket outlet

Circuit/ Submain wiring in PVC conduit:-Wiring for Circuit/ Submain siring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

4 x 4.0 sq. mm + 2 x 4.0 sq. mm earth wire

4 x 6.0 sq. mm + 2 x 6.0 sq. mm earth wire

S/ F Modular type electronic fan regulator:-Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

S/ F Batten holderSupplying and fixing batten/angle holder including connection etc as required

S/F Light plug point with modular type accessories:-Supplying and fixing suitable size G. I. box with modular plate and cover on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required.(for light

S/F Power plug point with modular type accessories:-Supplying and fixing suitable size G. I. PVC box with modular plate cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc, as required.(for light

ITC Ceiling fan:-Installation, testing and commissioning of celling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

ITC exhaust fan upto 450 mm, sweep:-Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

S/ F T. P. MCB DB:Supplying and fixing following way, three pole and neutral, sheet, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, etachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 4 way (4 + 12 ), Double Door, Horizontal type

6 way (4 + 18 ), Double Door, Horizontal type

Copper Earth plate electrode :-Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. (But without charcoal or coke and salt )

S/L 6 SWG G. I. wire in ground :-Supplying and laying 6 SWG G. I. wire at 05. meter below ground level for conductor earth electrode, including soldering etc. as required.

S/L 25 mm x 5 mm G. I. earth strip in ground :-Supplying and laying 25 mm x 5 mm G. I. strip at 0.50 meter below ground as strip earth electrode, including soldering etc. as required.

P/F G. I. lightning conductor finial :-Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G. I. tube, having single prong at top, with 85 mm dia 3 mm thick G. I. base plate including holes etc. as required.

Reverting, swearing and soldering lightning conductor tape:-Reverting, swearing and soldering of copper/ G. I. tape ( with another copper / G. I. tape, base of the finial ar any other metallic object) as required.

P/ F G. I. lightning conductor tape in vertical run :-Providing and fixing G. I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

P/ F G. I. lightning conductor tape in horizontal run :-Providing and fixing G. I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

P/ F Testing joint for G. I. lightning conductot :-Providing and fixing testing joint, made of 20 mm x 3 mm thick G. I. strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, check nuts and spring washers etc. complete as required.

P/ F G. I. earth tape for lightning conductor :-Providing and laying G. I. tape 32 mm x 6 mm from earth electrode directly in ground as required.

S/ F 'B' series, S. P. MCB :-Supplying and fixing 6 amps to 32 amps rating , 240 volts, 'B' series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, single pole, 'B' series

40 amps, single pole, 'B' series

S/ F four pole MCB isolator :-Supplying and fixing following rating, four pole, 240 volts isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps

S.T.C.OF Floowing rating LED street lighting luminarie with pressure die cast housing and toughened glass cover(IP 66 protection ) in existing pole/pipe for supply voltge 100-270 V AC,50Hz.Luminarie Shall be confirm ti IS:10322 part 5/section -3and shall be complete with all neccssary accessories as required 90/100 W LED Street light

Supply Installtion, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS: 374: 2019 Including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm.FR PVC Insulated copper wire suitable for 230 v 50Hz ,single phase supply etc complete as required 1200 mm (48") Ceiling fan

S.T.C.OF Floowing rating reccess /surface mounted LED tube light fitting suitable for 230v 50Hz,single phase supply etc.complete as required 15/16 Watt LED Bulb

2x20 watt tubelight

Metal exaust fan

Add GST 18 %

Add L.Cess 1 %

BIMAL CONSTRUCTION COMPANY