Provn of Wall paneling at Fd Fmn HQ at HQ 29 Inf Bde and Provn of night picket at unit mag at New KLP of 22 JAK RIF under GE East Fzr Cantt

Amount

M& L for 2nd class hard wood Plain fillets, square, rectangular or traingular in section, clean sawn, secured with nails or brads, sectional area exc. 13 & n.exc. 25 Sq cm complete all as specified and directed.

S & F 12 mm thick Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on sanp grid complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

M&L for Providding and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S& F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Surface excavation n. exc 30cm depth and averaging 15cm deep getting out in soft/loose soil complete all as specified and directed.

Materials and labour for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M & L 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor, fair finished complete all as specified and directed.

M & L chequered cement concrete tiles with grey cement and pigment 25cm x 25cm x 20mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed or bedding layer of mortor in CM (1:4)complete all as specified and directed.

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and directed.

M&L Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and directed.

M&L Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L Mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders etc complete all as specified and directed.

M&L Use & waste wooden form work (rough finished) to sides of footing, Beams, etccomplete all as specified and directed.

M&L Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Square, rectangular or polygonal etc. complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in columns, Footings and the like complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L Cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

M&L cement concrete 1:2:4 Type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

M&L rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished fair and even, with mixing water proofing compound complete all as specified and directed. Note:- T'he WPC shall be measured and paid separately.

M&L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished fair and even complete all as specified and directed.

M&L rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with Double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) in section-8 of MES Schedule Part-I complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I , complete all as specified and directed.

M&L Cement concrete (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in bed block for hold fast, coping etc including necessary form work complete all as specified and directed.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including rolled and roller plate complete all as specified and directed.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nutscomplete all as specified and directed.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm each pane complete all as specified and directed.

S&F glavanised mild steel wire cloth 0.56 nominal dial of wire and average width of aperature and fixed with finned tack or galvanised staple complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L Cement concrete type D-2, 75 mm thick 1:4:8 (40mm graded stone aggregate) as in sub floors, sub bases, floors etc complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tiles over and including 15 mm thick screed bed or beding layers in cm (1:6) complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as on vertical surfaces such as skirting/dado over and including 10 mm thic rendering in cement mortar (1:4) complete all as specified and directed.

S&F Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat chalk white primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and directed.

M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light point controlled by one, one way switch all as specified and directed for following:- (a) One light point point controlled by one single pole one way switch complete all as specified and directed.

(b) One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size complete all as specified and directed.

(c) One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size complete all as specified and directed.

All as per item No. 56 above, but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable. complete all as specified and directed.

S&F Switch piano flush type 5 amps, single pole one way duly ISI marked complete all as specified and directed.

S&F LED 20 W LED 6000 K, indoor E-Lite LED PRIDE PLUS NEO with wide angle profile. High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete all as specified and directed. Make-Havells, Model-E-Lite LED PRIDE PLUS NEO (LHEXACP7IN1W020) or Equivalent make from Philips/C&S as approved by GE.

S&F Recess and surface mounting LED flat panel 2'x2' made of CRCA sheet duly powder coated with high efficient LEDs & glare free full opal diffuser IP20 of 36 W. complete all as specified and directed. Make-Crompton, Model-LED TROFFER 36 W, Cat Part No. LCTLRNE-36-CDL or equivalent makes from Havells/ Bajaj as approved by GE.

S&F White Step Light Recess and surface mounting LED flat with high efficient LEDs complete all as specified and directed. Make-Philips, Cat Part No. 30974 or equivalent make from Havells/ Bajaj/ Crompton as approved by GE.

S&F Glint Switch piano modular flush type of single module, 6 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed. Make- INDOASIAN Cat Part No-800000 or other equivalent make as approved by GE.

S&F Glint Switch piano modular flush type of single module, 16 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed.. Make- INDOASIAN Cat Part No-800002 or other equivalent make as approved by GE.

S&F Glint modular Socket, 6 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directed.. Make- INDOASIAN Cat Part no-800020 or other equivalent make as approved by GE.

S&F Glint modular Socket, 6 /16 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directed.. Make- INDOASIAN Cat Part no-800022 or other equivalent make as approved by GE.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent make from Plaza/ INDOASIAN as approved by GE.

S&F Glint fan regulator, electronic step type 100W capacity, of single module, single pole made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed. Make-INDOASIAN Cap Part no-800041 or other equivalent make as approved by GE.

S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39527 or equivalent make from Plaza/ INDOASIAN as approved by GE.

S&F LED bulb of 10 watt complete all as specified and directed.. Make-Havells, Model No-LED ADORE 10 W B22 CDL 3 STAR LAMP or Equivalent in PS or other equivalent make as approved by GE.

S&F bldg LED Security light fittings 25 watts including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed. Make- Crompton, Model-ASTRA NEO, Cat Part No-LSTS-25-CDL-M or Equivalent make from Havells/ Bajaj as approved by GE.

S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz, at Bldgs upto 5 mtrs height, including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan upto 1.5 mtr for giving connection and all hanging arrangement i.e. standard down rod, hanging clamp, with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw compete without fan regulator and marking of MES nos with black synthetic enameled paint complete all as specified and directed. Make-Crompton Greaves, Model- STAR220 1200MM WHITE-WOR or equivalant in Orient/ Havells/ Usha/ Bajaj/ Khaitan or other equivalent make as approved by GE.

Supply and fix Desert cooler electric driven single phase having nominal air flow cap of 4000 cum/hr, with working voltage240 v 50 hz, made of 20 guage sheet of ISI marked, size not less than 90x70x70 cm surface area from top and bottom, 68x54 cm from front grill size including Tullu pump with 4 nos piano type 5 Amp switch on front side including one coat primer and two coats of synthetic enamel paint, inner tank coated with rust proof paint (steel body) with minimum volume of inner water tank is 80 Ltrs complete and thickness of tank should not not less than 20 guage, fitted with coppper winding electric motor of Compton / Khaitan/ Bajaj complete all as specified and directed. Note: Test certificate of electric motor from reputed brand i.e Crompton, Khaitan, Bajaj etc is mandatory required and submitted by contractor to concerned Engr-in-charge at the time of RAR period.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour, omplete all as specified and directed. Make- INDOASIAN, Cat Part No- 811807 or other Makes from Havells, Cat Part No- DHDNSHODAW08 as approved by GE. c

S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed.. Make- HAVELLS, Cat Part No.DHMGCSNF063 or other equivalent Make from - INDOASIAN, Cat Part No.811154 as approved by GE

S&F MCB SP, 06A to 32A, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed.. Make- HAVELLS, Cat Part No.DHMGBSPF006-32 or equivalent make from INDOASIAN Cat Part No.811015 as approved by GE.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. (Excavation and earth work shall be measured and paid separately).

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed. (Excavation and earth work shall be measured and paid separately ).Note- Punned down thickness shall be measured and paid.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duly) 1100 volts grade with stranded aluminium conductor of size 35 sq mm 2 core, complete all as specified and directed.

M&L for earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 metre as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) . complete all as specified and directed.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire. complete all as specified and directed.

B.L. Chaudhri and Co.

M/s Bansi Lal

M/s S B Construction Company

M/S Yashpaul Gulati

JAWAHAR CONSTRUCTION COMPANY

V V AND COMPANY

M/s Sarup Singh