Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹29.4 L+₹82,212.50 (2.88%)Rejected-Finance | L2 | Rejected-Finance Other than being L1 bidder | |
| 3 | L3₹31.8 L+₹3.2 L (11.2%)Rejected-Finance BRAJANATHCHAK TOWNSHIP HALDIA HALDIA HALDIA | MEDINIPUR EAST | WEST BENGAL | 721605 | L3 | Rejected-Finance Other than being L1 bidder | |
| 4 | L4₹34.9 L+₹6.3 L (22.1%)Rejected-Finance 26M NEEM SARAI DHOOMANGANJ PRAYAGRAJ 211011 | PRAYAGRAJ | UTTAR PRADESH | 211011 | L4 | Rejected-Finance Other than being L1 bidder | |
| 5 | L5₹35.4 L+₹6.8 L (23.8%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | L5 | Rejected-Finance Other than being L1 bidder |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
REPAIR REPLACEMENT TO FLOORING PLASTERING ROOFING AND MISC BR WORKS TO BLDGS OF SECTOR A UNDER AGE BR II OF GE 868 EWS
2024_MES_648941_1
865/EWS(NIT-45)/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹84,000
Yes
24 Jun 2024
2 Apr 2024
6 May 2024
2 Apr 2024
29 Apr 2024
15 Apr 2024
Amount
M&L for 15mm thick rendering in CM (1:4) on other than fair faces of brick work or stone masonary work, including finishing the surfaces with even and smooth (without using extra cement ) including taking down cement plaster of any description on brike or stone walls and disposed out of defence land complete all as specified and directed.
M&L for rendering 15mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth (without using extra cement) including taking down cement plaster of any description on brike or stone walls and disposed out of defence land in complete all as specified and as directed
Preparation of newly plastered surfaces of walls and applying two coats of distempering with oil bound distemper white or any tinted on walls for desired finish complete all as specified and directed by Engr-in-charge.
M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick PCC type B-0 (using 12.50 mm graded crushed stone aggregate) as in sub base for laying floor finished rough surface to receive floor finishes complete all as specified and directed.
M & L vitrified light dark/ double charged/ultracharged coloured ceramic tiles 10mm thick (square /rectangular) polished area of each tiles exc 0.36 sqm but not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colours of tiles including 15 mm thick screed bed and bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.all as specified and directed.
M & L Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.
M & L Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for (300mmx200mmx 7mm thick ) coloured glazed ceramic tiles on vetical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4. complete all as specified and directed.
S&F 0.63 mm thick corrugated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hooks, in roofs, walls etc. with grade of zinc coating 275 including dismantling of existing plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed.
Fixing only galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc., including dismantling of existing plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed.
S&F 0.63mm thick plain Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 indlucing dismantling of existing plain or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed.
M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated sheet of any description complete all as specified and directed by Engr-in-Charge
M&L Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated sheet any description complete all as specified and directed by Engr-in-Charge
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.all as specified and directed.
M&L for 2nd class hard wood clean sawn as in scantling fixed with nails, framed and fixed as in framed work including dismantling of existing timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.
S&F rolled mild steel structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, including dismantling structural steel work of any description in any position, complete all as specified and as directed by Engineer-in-Charge. Make and Procurement: All as specified in PS clause No 8 of tender documents.
S&F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde- E- 250) quality-A Fe including dismantling structural steel work of any description in any position, complete all as specified and as directed by Engineer-in-Charge. Make and Procurement: All as specified in PS clause No 8 of tender documents.
Preparation of new galvanised corrugated sheets of new zinc or galvanised surfaces to receive paint of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide or zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide or zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Preparation of old decorated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
S&F plain sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane including hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engr in charge.
S&F figured glass, pinhead type in squares n exc 0.5 sq.m each pane including hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engr in charge.
M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Engr in charge.
M&L for rendering 20mm thick rendering in cement mortar 1:4 on concrete surfaces, finished even and smooth (without using extra cement) with water proofing compound as per manufacturers instructions complete all as specified and as directed. Note: Water proofing Compound shall be measured and paid separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.
M&L for APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm) laid on primed surface by forced application on steel surfaces of any description complete all as specified and directed by Engr-in-charge.
Rampal Singh Contractor
M/S MA CONSTRUCTION Co
bharat construction
SUMEET TRADING CORPORATION
M/S Praveen Kumar and Sons
Mehar Enterprises
SHUBHAM ENGINEERS & BUILDERS
M/s B R Constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .