Construction of infrastructure at segregation center at Kharu II

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil.

Providing and laying of dry stone soiling of any thickness in horizontal level, hand packed including cost of stones.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size). Nallah Stones.

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with: cement mortar 1:6 (1 Cement: 6 coarse sand)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 course sand 4 graded stone aggregate 20mm nominal size(Crushed).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo Mechanically Treated Bars.

Centring and shuttering including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete.

Centring and shuttermg including strutting, propping etc. and removal of form for· Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and shuttering including strutting, propping etc. and removal of form for: (a) Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood.

Providing and fixing of local ladakhi ornamental shingtsak, including polishing and complete job.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second kail wood. For Door.

Providing and fixing glazed shutters for doors, windows- and clerestory windows using 1 Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinges bright finished of required size with necessary screws. second class kail wood. For Window:

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying readymade wooden flooring ( Action Tesa/Green Panel) etc AC3 for flooring including thermocol and side lipping complete as per Engineer-in-charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 60x60cm

French spirit polishing with Two or more coats on new works including a coat of wood filler:

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litres low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and mW.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend. aking good the walls and floors , wherever required.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers.

Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape(1500x450) mm.

Providing and fixing of Soap Dish (C.P Brass) with brackets etc.

Providing and fixing brass bib cock of approved quality. 15mm nominal bore.

Providing and fixing flow trap of PVC .

Providing and fixing soil, waste and vent pipes 100mm dia PVC.

Providing and fixing soil, waste and vent pipes 75mm dia PVC.

Providing and fixing of plain bends of required degree 100mm dia PVC.

Providing and fixing of plain bends of required degree 75mm dia PVC.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) 20mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) 25mm

Providing and placing 1000 Litres 4-5 layer puffed insulated water storage tank for all weather conditions with UV protection and BPA free.

Providing and fixing C.P Brass close hole basin mixer piller tape of approved quality and make 15mm nominal bore of Standard back type.

Providing and fixing C.P Brass angle valve for basin, mixer and geyser.

Providing and fixing C.P Jalli

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing of insulation for water storage tank with 25 mm nitrile sheet, rock wool, GI insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, clamps etc and cost of material and labour complete job as per direction of Engineer-in-charge.

Providing and fixing of pipe with heat wire 25 x13 mm nitrile insulation pipe, rock wool, GI insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, clamps etc cost of material and labour complete job as per direction of Engineer-in-charge.

Providing and fixing of pipe with heat wire 25 x13 mm nitrile insulation pipe, Including all fixtures, adhesive, clamps etc cost of material and labour complete job as per direction of Engineer-in-charge.

Providing and fixing of 1 HP motor with fixtures ,screws and clamps complete job as per Engineer in charge.

Carriage of cement and steel from an average lead up to 45 Km by Mechanical Transport.

Carriage of sand and coarse aggregates from an average lead up to 15 Km by Mechanical Transport.

Carriage of stones from an average lead up to 20 Km by Mechanical Transport

M/S JIGMAT NAMGAIL

M/S TASHI PHUNTSOG GOVT CONTRACTOR