Annual Surfacing on Chambi to Lahri road under AMP 2020-21 (Rural road)

Amount

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm on prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.

Providing and laying bituminous macadom with 40-60 TPH batch type HMP producing an average output of 40 (forty) tonnes per hour with using crushed aggregates of specified grading, premixed with bituminous binder @ 3.3% (Three point three ) per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignmernt , rolling with smooth wheel , vibratory and tandem rollers to achieve the desired compaction as per MORD specification clause No 504 complete in all respect and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government.

Providing, laying and rolling of 20 mm (twenty millimetre) thickness open-graded premix carpet by machanical means composed of 13.2 mm (thirteen point two millimetre) to 5.6 mm (five point six millimetre) aggregates either using penetration grade bitumen (VG-10) (viscosity grade ten) 14.60 kg (fourteen point sixty killogram) per ten square metre grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type B as per Technical Specification Clause 508 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.

Providing and laying seal coat by mannual means sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 using bitumen (VG-10) (viscosity grade ten) 6.80 kg (six point eighty killogram) per 10 (ten) square metre and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.

Providing and laying Hot plastic road marking paint of approved manufacture 2.5 mm (two decimal five millimetre) thick with reflectorising glass beeds at the rate 250 (two hundred fifty gram) gram per square metre area, thickness of 2.5 mm (two point five millimetre) is exclusive of surface applied glass beeds as per specification and with strips of 0.10 ( zero decimal one) metre width in centre lines or edge lines of the road as per MORTH specification Clause No.803 or as per directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax,GST or any other taxes imposed by the Government.

sumit mahajan