PROVN OF PVC COATED CHAIN LINK FENCING NEAR BLDG NO P 236 AND P 260 AT MO AND OTHER SANCTIONED WORKS AT NAVY PARK UNDER GE HADDO SRI VIJAYA PURAM

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard dense soil

All as per item No-4 but additional 1.5m or part thereof in depth beyond the first 1.5 m all as directed.

Removing excavated spoil to a distance not exc 50 mtr and deposited where directed at a level n.exc 1.5 mtr from the starting point complete all as specified and directed

M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole including necessary formwork complete all as specified and directed

M&L for cement concrete type C1 1:3:6 (20mm aggregate) in foundations, filling and mass concrete

M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and as directed

M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement complete all as specified and as directed

M&L for cement concrete 1:3:6 type C2 (Using 40mm graded stone agrregate) as in foundation of posts, railing and similar work complete all as specified and directed

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified

M&L for providing precast reinforced cement concrete cover slabs for drain in RCC (1:2:4) B-1, using 20mm graded aggregate set in cement mortar 1:4 complete all as specified and as directed.

M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290, Gde-E-165 all as specified and as directed

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with MS post of grade Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars complete all as specified and as directed

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410W, Gde-E-250 Quality-A) complete all as specified and as directed

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed

S & F Modular Ac Box With 20A DP MCB "C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98492 or equivalent in L&T / Havells

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed

M&L for 10mm thick plaster in CM (1:4) on fair faces of concrete/PCC block surfaces of walls finished even and fair (without using extra cement) all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed.

M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 460mm to sewage pipes of 160mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed

Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

Demolition of Reinforced manhole, Drain over cover slabs in similar works etc complete all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

M&L for steel tubular swaged poles 410 SP-31 (9.0 metres long) conforming to IS:2713 (Part-I) 1980, welded with mild steel base plate of size 300x300x6mm thick, finial taper plug, bolts, nuts and washers including two coats of aluminium paint over a coat of red oxide primer including taking down old unserviceable pole of any type complete all as specified and directed. Make : Kalinga Tubes/The National Tubes CO/India tube & CO/ Utkarsh

Point

S & F Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. Make-Havells model No LHFOAJE1TZ1I060 or equivalent in CG/ C&S

M&L for seamless false ceiling made out of 12mm thick of gypsum board 600mmx600mm fixed to the ceiling section with 25mm long self grilling and tapping screws having philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48mm wide fibre tape to provide seam less finish and including GI channels 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl thin layer of PoP with gysum binder,sanding the surface till smooth surface is obtained and finally applying two coats of acrylic emulsion over a coat of primer complete all as specified

All as per item Sl No 82 above but for One light/fan point controlled by one modular switch 5 Amps one way complete all as specified and directed.

All as per item Sl No 82 above but for two light point controlled by one switch 5 Amps one way complete all as specified and directed.

All as per item Sl No 82 above but for one bell point controlled by one modular bell push switch 5 Amps one way complete all as specified and directed.

All as per item Srl No.82 above but point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed.

S & F street light of cap 60 watt, aerodynamically designed for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy > 110/120 LPW, along with 10KV SPD all as specified and directed. CG model No TRP-409-60-57-SL-GL-NSG or equivalent to Havells

Supply & fix Cable Junction Box of size 155 x 210 x 92, IP 66 (Grey) with integrated membranes / metric knockouts for cable entry of size upto 25 sqmm twin core with earth, Lighting Outgoing cable: 3C x 1.5/ 2.5 Sq.mm cable, Degree of protection: IP66, Lighting MCB Rating: 10A,SP, B-Curve, current carrying capacity: 40A, Material: PC-GFS (polycarbonate) , Weatherproof, resistant to weather influences all as specified and directed. Make : Hensel model No DK 1616 G or equivalent.

Taking down old timer panel and supply and fixing of out door type Street light timer Panel /Distribution Boards with pole, panel etc as directed alongwith 65A 3 pole/230 Volts contactor and Digital 24 hrs/ Analog Time Switch, 63 A MCB, Manual and Auto Mode Toggle switch cable connectors, cable gland etc including suitable fixing arrangement with existing pole/ panel all as specified and directed. Make: Cat No. TL065AB0 of indoasian Time lite or equivalent in L&T / Havells

S & F and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED22S or equivalent to CG/ Havells/ Luker

All as per item Sl No 82 above but, point wiring for 3 pin switch socket outlet , 5 Amps on same board complete all as specified and directed.

All as per item sl No 82 above but, point wiring for 3 pin switch socket outlet , 5 Amps on independent board complete all as specified and directed.

S & F and testing Mirrior light fitting of cap 20 watt with all fixing arrangements all as specified and directed. Make-Havells cat no LHLDESAARANC020 or equivalent to Philips/ CG