Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.8 LAccepted-Finance | L1 | Accepted-Finance Accepted as e-generated 1st Lowest Bidder for the execution of subjected work | |
| 2 | L2₹59.4 L+₹2.6 L (4.54%)Accepted-Finance | L2 | Accepted-Finance Accepted as e-generated 2nd Lowest Bidder for the execution of subjected work | |
| 3 | L3₹61.9 L+₹5.1 L (9.01%)Accepted-Finance | L3 | Accepted-Finance Accepted as e-generated 3rd Lowest Bidder for the execution of subjected work | |
| 4 | L4₹63.9 L+₹7.1 L (12.5%)Accepted-Finance | L4 | Accepted-Finance Accepted as e-generated 4th Lowest Bidder for the execution of subjected work | |
| 5 | L5₹65.2 L+₹8.4 L (14.8%)Accepted-Finance SHED NO 11 DSIIDC WAZIRPUR INDUSTRIAL AREA DELHI DELHI NORTH WEST DELHI DELHI 110052 | NORTH DELHI | DELHI | 110052 | L5 | Accepted-Finance Accepted as e-generated 5th Lowest Bidder for the execution of subjected work |
Tender Value
₹73.9 L
EMD Value
₹1.5 L
Closing Date
21 Sept 2023, 4:30 pmClosed
Executive Engineer, KPDCL, ED2nd, Rajbagh
Office of Executive Engineer, KPDCL, ED2nd, Rajbagh, Srinagar
Replacement of Existing SVL by LED on 12.5 mtr Octagonal Poles alongwith ReAlignment of Tilted Poles, Replacement of Damaged Cables for smooth functioning of Streetlights installed at NH44 from Parimpora to Hyderpora under Capex 2023-24 (PHASE-I)
2023_PDD_228417_1
ED-II/17 of 2023-24 Dated 30/08/23
Open Tender
Electrical Works
Turn-key
60 days
from Parimpora to Hyderpora
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,000
Yes
Ex. Engineer,KPDCL, ED2nd Credited to MH0801 Power
₹1.5 L
Yes
5 Oct 2023
2 Sept 2023
22 Sept 2023
2 Sept 2023
21 Sept 2023
5 Sept 2023
2 Sept 2023 - 5 Sept 2023
Amount
Supply of 250 Watt LED Luminary as per specifications provided in the tender document
Installation, Testing and Commissioning of 250 Watt LED Luminary on single/double arm brackets of 12.5 mtr Octagonal Pole using Skylift/Hydra/Crane of suitable outreach
Supply and Fixing of G.I. Foundation Bolts (J Type) M25x750 mm long (Set of 4 No.’s per pole)
Providing and Laying of RCC Foundation for 12.5 mtr. long Octagonal poles including proper curing. 0.55mX0.55mX1.5m (RCC with concrete ratio 1:1.5:3 with 10 mm dia longitudinal MS reinforcement rods with reinforced bar ties of 8 mm dia 300 mm apart) - complete job as per drawing
Transportation of old Octagonal Poles 12.5 mtr long from Divisional Stores at Bemina to respective Working site for their erection at site
Erection of Octagonal Poles 12.5 mtr long (Lifted from Divisional Stores, Bemina)
Providing and Earthing of Octagonal Poles 12.5 mtr long using 8 No. SWG and GI spike rod min 5 ft alongwith clamp, nuts/bolts and washers
Supply of 6 Amp MCB, C Curve type
Installation, Testing and Commissioning of 6 Amp MCB, C Curve type
Supply and Fixing of MCB strip of appropriate size suitable for mounting MCBs
Supply, Fabrication and Fixing of Door Opening Plate (GI) with Double Bolt (120mmx400mmx3mm) compatible with Octagonal Poles of Mastech Technologies Make, available at site
Supply of 1.5 sq mm PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop and earthings
Laying, Testing and Commissioning of 1.5 sq mm PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop and earthings
Supply of 16 mm sq 4-core PVC armoured aluminium cable strictly as per specifications provided in the tender document
Supply and Fixing of 16 Sq. mm Aluminum cable thimbles/lugs at termination points including providing of insulation tape
Supply and Fixing of 10 mm Aluminum thimbles/lugs
Supply of HDPE Corrugated pipe 50 mm O/D and inner diameter 38mm
Underground Laying of 16 sq mm 4-core armoured cable through HDPE Corrugated pipe 50 mm O/D and inner diameter 38mm by way of trench excavation in hard soil (WXD = 0.3mx0.45m). The job further includes refilling back the same and removal of surplus excavated material and Tile Work Rectification/restoration at few intersections, whereever required to be executed) (Bidder to qoute rate rate inclusive of HDPE pipe laying also)
Laying of 16 sq mm 4 core armoured cable in HDPE Corrugated pipe 50 mm O/D and inner diameter 38mm along the bridge (HDPE pipe to be fixed using proper clamps/bolts/screws) (Bidder to quote rate inclusive of cost of clamps/bolts/screws and its fixing to hold HPDE pipe with bridge)
Overhead Laying of 16 mm sq 4-core PVC armoured aluminium cable (whereever required)
Supply and Laying of Warning Tape inside trench (200 mm below ground level)
Supply and Fixing of LT Cable Route Marker with proper concreting of Base
Supply and Fixing of Four way terminal block/Connectors with all allied acessories of appropriate size
Supply and Fixing of Danger Plates with Clamps (33 KV)
Supply of Digital Timer of ISI Standard (Astronomical Time Switch) as per specifications provided in the tender document
Installation, Testing and Commissioning of Digital Timer of ISI Standard (Astronomical Time Switch)
Supply of Contactor 63 Amp as per specifications provided in the tender document
Installation, Testing and Commissioning of Contactor 63 Amp
Supply and Fixing of Anticlimbing Devices using GI Barbed wire with end Clamps (2 kg Barbed wire per job/pole with 2 G I clamps with GI nuts/bolts and washers)
Providing and Painting of four pole structure (sub-station with ST poles and channels) along with one No. ST pole (Total 5 No. poles and channels)
Providing and Painting of four pole structure (sub-station with ST poles and channels) along with 02 No. ST pole (Total 06 No. poles and channels)
Providing and Painting of four pole structure (sub-station with ST poles and channels)
Supply, Laying, Testing and Commissioning of 70 mm sq 3.5 core aluminium armoured cable (to be laid overhead)
Supply and Erection of ST Pole 11 Mtr. Long (ST-410 SP56) with Galvanized Channel Iron Earthing Arrangement (as per Approved Drawing CE/P&P/Dwg/2022-STP-E0001) including its loading from factory unit, carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)
Supply and Fixing of GI Muki Clamp of 50x6 mm galvanized flat iron alongwith Shackle Insulators suitable for ST Pole with back clamp and galvanized nuts and bolts
Supply and Fixing of Pair Box (Steel Box) of appropriate size for 7/8mtr concrete pole with proper GI clamps
Providing and Earthing of ST Poles 11 mtr long using GI Pipe 40 mm 2.5 mtr long through 25x3mm GI Strip.
Providing and Painting of ST Poles 11 mtr long with 1 coat of Red Oxide and 2 coats of Aluminium Paint
Providing and Laying of Cement Bottoming of ST Poles 11 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.6 cum/pole)
Straightening of tilted existing Octagonal Poles 12.5 mtr long
Dismantling of Tilted/Damaged existing Octagonal Poles 12.5 mtr long alongwith its loading/carriage/unloading upto Divisional Stores at Bemina
Uninstallation of existing 400W SVL/120 LED Light fitting and unloading the same to divisional stores
Uninstallation of existing 120W LED luminaries and its installation at Tengpora Bridge over available PCC poles erected at site (Including Transportation)
Providing/Submission of both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pic per page-pre/post)
M/s PAMPOSH ELECTRICALS
M/S INTERNATIONAL STORES
M/S R R ELECTRICAL SERVICES
OLIVE EXPORTS PVT LTD
Escon Electricals
Heaven Electricals
Powermech Engineering Services
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .