SPECIAL REPAIRS REPLACEMENT OF LT PANEL, XLPE LT CABLE AND INTERNAL ELECTRIC WORK OF SHIPS GALLEY AT INHS ASVINI.

Amount

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

M & L for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded HRFR copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in and including surface PVC modular box with cover plate and frame of sutable size including 1.5 sqmm size PVC insulated, unsheathed, multistranded HRFR copper conductor cable for continuous earth conductor (using green colour) and connecting to earth dolly for One light/ fan point/ bell point controlled by one switch 5 Amp, SP, one way 240 volts.

-Ditto- all as per item No 2 above but One 3 pin 5 Amps socket on same board

- Ditto- all as per item No 2 above but One 3 pin 5 Amps switch socket on independent board.

M & L for point wiring with 4 Sqmm (nominal area) PVC insulated and unsheathed multistranded HRFR copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in and including surface PVC modular box of sutable size including 1.5 Sqmm size PVC insulated, unsheathed, multistranded HRFR copper conductor cable for continuous earth conductor (using green colour) and connecting to earth dolly for one 6 pin 16 Amps switch socket combination point on independent board.

S & F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) complete all as specified and directed by Engineer-in-Charge.

S & F Modular switch 1 way 6 Amps, 1 module complete all as specified.

S & F Modular switch 1 way 16 Amps, 1 module complete all as specified.

S & F Modular Socket, 6 Amps 2/3 pin combined 2 module, complete all as specified.

S & F Modular Socket, 6 /16 Amps 6 pin 2 module, complete all as specified.

S & F in repairs modular stepped type fan regulator, 120W, 2 module

S & F LED light fitting 1 x 10 Watts, 2 feet, Decorative, ultra slim square profile with extruded polycorbonate, environmental friendly , energy efficient , prewired complete with and including two Nos PVC box of size 75x75x20mm for mounting light fitting including taking down old FTL fitting complete all as specified . Make : Havells cat part No: 10W LED 6500K or equivalent model of Wipro/Philips.

S & F LED light fitting 1 x 20 Watts, 4 feet, Decorative, ultra slim square profile with extruded polycorbonate, environmental friendly , energy efficient , prewired complete with and including two Nos PVC box of size 75x75x20mm for mounting light fitting including taking down old FTL fitting complete all as specified . Make : Havells cat part No: 20W LED 6500K or equivalent model of Wipro/Philips.

S & F LED light fitting Surface mounting 1' x 1', 18 Watts Polaris IV exquisitely designed luminaire which is bound to deliver extra ordinary lumens through its pure from nd glare-less light including taking down old FTL fitting complete all as specified . Make: - Crompton cat part no. LCTLRN -18-CDL or Equivalent model of Phillips/Wipro.

S & F LED light fitting Surface mounting 2' x 2', 36 Watts Polaris III exquisitely designed luminaire which is bound to deliver extra ordinary lumens through its pure from nd glare-less light including taking down old FTL fitting complete all as specified . Make: - Crompton cat part no. LCTLRN -36-CDL or Equivalent model of Phillips/Wipro.

S & F LED light fitting Recessed/ Surface mounting1 x 4' , 40Watts, Flat panel ceiling light with high performance, commercial grade solution suitable for hospitals including taking down old FTL fitting complete all as specified . Make: - Crompton cat part no. LCTLRN -40-CDL (1 x 4) or Equivalent model of Phillips/Wipro.

M & L for earthing complete with G .l earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 25 x 4 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to out side MD land, including PCC chamber in PCC (1 : 2 : 4) type B1 (using 20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40mm x 40mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh, 20 mm bore medium grade GI pipe for watering, 40 mm bore light grade Gl pipe for lead protection including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 on Srl page No 497 of SSR Part-I (2009) and connected to earthing test point all as specified and indicated including testing on completion as directed by Engineer-in-Charge.

S & F in repairs TPN DB-VTPN, DPX3 MCCB DBs 8 Way, (DPX3 160+24) suitable for flush mounting and surface mounting, conforming to IP 43 & IP 54 - IK 09 with prefitted masking sheet with 250 Amp copper bus bar for each phase, complete with 2 Neutral bar and 2 Earthing bar and cable ties for cable management, provision for DPX3 upto 160 MCCB as incomer and SP/TP MCBs as outgoing as per IEC 61439-3 complete all as specified and as directed. Make:- Legrand cat part No. 507752 or Equivalent model of Havells/L&T/ C&S Electric Ltd/ABB.

S & F in replairs TPN DB-VTPN, DPX3 MCCB DBs 4 Way, (DPX3 160+12) suitable for flush mounting and surface mounting, conforming to IP 43 & IP 54 - IK 09 with prefitted masking sheet with 250 Amp copper bus bar for each phase, complete with 2 Neutral bar and 2 Earthing bar and cable ties for cable management, provision for DPX3 upto 160 MCCB as incomer and SP/TP MCBs as outgoing as per IEC 61439-3 complete all as specified and as directed. Make:- Legrand cat part No. 507750 or Equivalent model of Havells/L&T/ C&S Electric Ltd/ABB.

S & F in repairs MCB DB TPN 4 Way, (8+12) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 100 Amp copper bus bar for each phase, complete with din rail, Neutral and Earthing bar complete all as specified and as directed. Make:- Legrand cat part No. 507680 or Equivalent model of Havells/L&T/ C&S Electric Ltd/ABB.

S & F in repairs MCB DB SPN 4 Way, (4) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 100 Amp copper bus bar for each phase, complete with din rail, Neutral and Earthing bar complete all as specified and as directed. Make:- Legrand cat part No. 507610 or Equivalent model of Havells/L&T /C&S Electric Ltd/ABB.

S & F in repairs Sheet metall enclosure 20 Amp SP (2P+E) with Metra plug and socket DBs suitable for protection of appliances like AC/Geysers etc complete with one MCB single pole 20Amps, 230Volts , complete after taking out the old unserviceable DBs with connection complete and making good the disturbed surfaces complete all as specified and as directed. Make:- Legrand cat part No. 507811 or Equivalent model of Havells/L&T /C&S Electric Ltd/ABB.

S & F in repairs DX3 MCB SPN, 240 Volt, 16 to 63 Amp, 10 KA, IP 20 Protected terminals, Complete all as specified and as directed. Make:- Legrand cat part No. 408620 or Equivalent model of Havells /L&T /C&S Electric Ltd/ABB.

S & F in repairs DX3 MCB SP, 240 Volt, 6 to 40 Amp, 10 KA, IP 20 Protected terminals Complete all as specified and as directed. Make:- Legrand cat part No. 408596 or Equivalent model of Havells/L&T /C&S Electric Ltd/ABB.

S & F in repairs DX3 MCB TPN, 415 Volt, 63 Amp, 10 KA, IP 20 Protected terminals, Complete all as specified and as directed. Make:- Legrand cat part No. 408683 or Equivalent model of Havells/L&T /C&S Electric Ltd/ABB.

M & L for repairs MCCB 4 Pole, 415 V, Thermal magnetic adjustable type, 160 Amps with breaking capacity 25 KA, complete all as specified and directed. Make:- Legrand cat part No. 420057 or Equivalent model of Havells/L&T /C&S Electric Ltd/ABB.

M & L for repairs MCCB 4 Pole, 415 V, Thermal magnetic adjustable type, 100 Amps with breaking capacity 16 KA, complete all as specified and directed. Make:- Legrand cat part No. 420015 or Equivalent model of Havells/L&T /C&S Electric Ltd/ABB.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core 4 Sqmm PVC insulated and unsheathed, multi stranded HRFR copper conductor cable using colour code for phase red and neutral black with and including 4 Sqmm PVC insulated and unsheathed multistranded HRFR copper conductor cable in green colour connected to common earth point and connected to earth dolly drawn through and including 25 x 12mm / 32 x 12mm PVC casing caping, heavy grade (ISI marked) with and including all accessories etc including taking out carefully old sub main wiring and making good disturbed surfaces as per existing compete all as specified and directed. NOTE:- (i) Two run of 4 sqmm copper conductor cable , one run of 4 sqmm earth continuity conductor and 25 x 12mm / 32 x 12mm PVC casing caping and accessories shall be measured and paid as one length.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core 6 Sqmm PVC insulated and unsheathed, multi stranded HRFR copper conductor cable using colour code for phase red and neutral black with and including 4 Sqmm PVC insulated and unsheathed multistranded HRFR copper conductor cable in green colour connected to common earth point and connected to earth dolly drawn through and including 25 x 12mm / 32 x 12mm PVC casing caping, heavy grade (ISI marked) with and including all accessories etc including taking out carefully old sub main wiring and making good disturbed surfaces as per existing compete all as specified and directed. NOTE:- (i) Two run of 6 sqmm copper conductor cable , one run of 4 sqmm earth continuity conductor and 25 x 12mm / 32 x 12mm PVC casing caping and accessories shall be measured and paid as one length.

S & F ceiling fan 5 star rating, 230 Volts, 50 Hz, 1200 mm sweep including all accessories HS plus , opel white colour and connecting up with and including 0.75sq.mm. size 3 core PVC insulated flexible cable with multi-stranded copper conductor from ceiling rose to connector of ceiling fan including taking down carefully U/S ceiling fan by carefully disconnecting electrical connections and depositing in MES store yard.

S&F in repairs exhaust fan 300mm sweep, heavy duty metalic body, 1400 RPM suitable for working on 230 V, 50 HZ, AC supply complete with louvers, fixed with suitable size GI bolts, nuts and washers duly grouting new hanger fasteners of size 50mm x 10mm - 4 Nos including connecting up with 0.75sq.mm. size 3 core PVC insulated flexible cable with multi-stranded copper conductor from ceiling rose to connector of exhaust fan and making good disturbed surface as per existing complete all as specified. Make - Crompton Greaves,Almonard, Usha, Khaitan, Bajaj.

Supply, laying,connecting & testing 120 Sqmm x 3.5 core XLPE insulated armoured heavy duty 1100 volts grade, aluminum conductor cable laid in trenches / pipes / fixed on wall with suitable size GI clamps including taking out old cable all as specified and directed. Note :- (i)PCC cable cover, sand cushioning , excavation and earth work shall be measured and paid separately . (iii) Rate quoted shall be deemed to be included for necessary aluminium lugs,cable glands, thimbles etc complete.

Supply, laying,connecting & testing 35 Sqmm x 4 core XLPE insulated armoured heavy duty 1100 volts grade, aluminum conductor cable laid in trenches / pipes / fixed on wall with suitable size GI clamps including taking out old cable all as specified and directed. Note :- (i)PCC cable cover, sand cushioning , excavation and earth work shall be measured and paid separately . (iii) Rate quoted shall be deemed to be included for necessary aluminium lugs,cable glands, thimbles etc complete.

Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils.

Removing excavated material from the site of work to outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

M & L for dry river sand as cushioning for protection of UG cable including punning of sand in layers all as specified. Note: Thickness after punning down shall be measured and paid

Supply & laying factory made un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm all as specified & directed.

M & L for cutting existing road, hard standing of size 450mm wide and 450 depth for laying pipes, cables etc and filling the trench with murum, well rammed in layers and top 100mm filled with PCC 1:2:4 type B2 (using 40mm graded stone aggregate) and finished top surface fair and even complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in copings around steel pole including weathering slightly rounded or chamfered angles and throating and necessary form work complete all as specified.

S & F GI pipe 50 mm bore light grade for protection of cable laid in trenches or fixed to poles/wall with and including suitable size GI clamps complete all as specified.

S & F GI pipe 80 mm bore light grade for protection of cable laid in trenches or fixed to poles/wall with and including suitable size GI clamps complete all as specified.

S & F in repairs Direct On Line startor 6 HP to 10 HP, Relay range 6 to 32 Amps, AC 415 volts, 50Hz, mounting on and including second class HW board of size 1' x 1' with with fixing accessories complete all as specified and as directed.

DHARMESH ENTERPRISES

M/s R J TRADING CO

GANGAJAL

M/S V N ENTERPRISES