Development of Gupt Ganga by way of Installing 12.5 Mtr. High mast light for illumination at Kufi Akhnoor

Amount

Supply , Installation of Hot Dip Galvanised 12.5m High Mast for LED flood lights with motorised carriage of aproved makes with its accessories. Mast shall be intwo sections hot dip galvanised and suitable for wind velocity i.e. as per IS standard 875-1987 ( i.e 180 km/hr.) . It should also include acessories of the high mast including head frame, steel wire rope 6mm (Dia 7/19 construction),Trailing cable, double drum winch,galvanised luminaire Carriage suitable for required luminaries symmetrically or asymetrically as shown in the lighting design and its control gear boxes, lighting final. The mast shall have integral power tool installed in the base compartment for its operation including one Set ( 6 No ) of foundation bolts manufactured from special steel along with nuts , washers, anchor plates and templates. Method of Operations Motor/Manual with power tool of below mentioned capacities. 1.5 HP Motor with input supply 415/240 V with capacity of reverse operation Make: SYSKA/ Bajaj/Surya/Crompton

Providing reinforced cement conrete foundation of size and design as per Mast Manufacturer.

Supply, Installation , Testing and commissioning of 200W LED flood lights with min 120 lumens /watt with LM 79 and LM 80 report with min IP 65 protection. Make : Syska/Panasonic /Philips/Bajaj/IB

Supply, Installation, Testing and Commissioning of Floor Mounted Outodoor Type Double Door Low voltage Outdoor panel IP54 Suitable for operation on 433V 3 Phase, 50Hz Supply, Made of 2.0mm CRCA Sheet enclosure with Aluminium bus bar with following switchgears and metering . Necesssary arrangement be made for termination of incoming cable and outgoing cables. LT Panel shall be manufactured as per IS8623.

Incomer

63A 4 Pole MCCB 25kA-1 No.

GPS timer switch equivalent to 1 Channel Alpharex D22 Astro -1No.Make : L& T , Legrand, Siemens

Surge protection Device Class B +C 3P+N Legrand/OBO/JMV

Outgoings

32A 2 Pole MCB 10 kA-6 Nos

32 A 4 POLE MCB 10 KA -1 No

Make of MCCB/Contactor/TimeSwitch/SPD: Schneider (Acti-9), Legrand (DPX3), Siemens (Betagard)/L&T/C&S

Supply, Installation, testing and commissioning of 2.5 sq.mm x 2 core aluminium cable for providing internal connection from junction box to LED light with the help of copper thimbles of appropriate size make Gloster/Polycab/KEI

Chemical Type Maintainance free earthing with 3 MTR 50 MM GI electrode with Conncetion of panel/high mast with 25x3 mm GI Strip Make JMV/GMAX/OBO with CPRI Approved and NABL certified Test Report .

Supplying and laying of 25 sq.mm x 3.5 core Aluminium armored cable by digging trench 1.5 ft. deep x 1 feet wide/placing across wall with the help of iron clamps as per the instructions of Engineer-incharge in 50mm sq HDPE pipe PN8/PN10 make Gloster/KEI/Polycab

Supply and fixing of 40mm dia B class G.I pipe at crossing and at spots wherever required as style requirement

Supply and laying of 50 MM HDPE Pipe PN 10/PN8 ISI marked in 0.75 mtr wide and 1 mtr deep trench by way of digging and filling it back with mud upto ground level for the larying of cable

Sumit Anand