REPAIRS TO JOINERY, ROOF TREATMENT, SUNKEN TREATMENT AND SANITARY FITTINGS AND OTHER ALLIED WORKS IN NP, SAINATH COMPLEX AND BILLETS UNDER GE (AIRFORCE) LOHEGAON AT AIRFORCE STATION PUNE

Amount

Taking/removing existing tarfelt treatment /stone slab from RCC roof slab/terrace etc and cleaning of all foreign material such as fungus mass etc,by means of MS scrappers patty or any other suitable tools and removing debris to a distance exc 1.5 KM but n;exc 5 KM from the starting point and deposited where directed by Engr-in-charge.

Demolition of cement concrete unreinforced (other than ground floor)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified as directed by engr-in-charge.

M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of liquid WPC by wt of cement (as per manufacturer instruction).

M&Lfor brushing neat cement slurry with 3.0 Kg of cement per Sq.meter.

M&L PCC (1:2:4) type B0, (12.5mm graded aggregate) padding/ coping /coving/chamferingh in averaging on RCC roof slab or terrace including finishing even & smooth with using extra cement, include for use of formwork.

M&L rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC with cement (as per manufacturer instruction) including finishing even and smooth without using cement.

Supply only Integral water proofing compound.

M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on incl. priming with bitumen primer 80/25 @ 1.7 kg per sqm surfaced application including preperation and applying two coats of Heat resisting paint over APP Membrane complete all as apecified and directed.

Dismantling of structural steel work

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- AFe

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F Rolled Mild Steel roof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - W qwality A including distance pieces, cleats, etc., complete.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down shutters of any description area not exceeding 1 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

Taking down Shutters of any description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.

Taking down chowkhat of any description nexc 1.5 sq.m each complete all as specified and as directed.

Taking down chowkhat of any description exc 1.5 sq.m and n exc 4 sq. m each complete all as specified and as directed.

S & F 35 mm thick second class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with out sash bars ) edges for receiving glass etc sizes of members of shutter as specified in SSR Part I section 8 clause 8.20 (a) s.

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed by Engr-in-Charge.

M & L for 105mmx60mm pressed steel frame for doors with one or more rebates incl necessary fixing lugs ,hinges,lock strike plat etc complete all as specified and directed by engr -in-charge .

M&L for providing ,cement concrete type C1 1;3:6 ( 12.5 mm graded aggregates ) for chowkhat filling as reqd all as specified and directed by engr -in-charge.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM (1:4), complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer.

S & F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed lenght of bolt 250mm.

S&F in 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in Aluminum anodized tower bolts 150mm length.

S & F in Aluminum anodized tower bolts 100mm length.

S/F in aluminium handles cast type anodized 125mm size.

S/F in aluminium handles cast type anodized 150mm size.

S & F 75 mm size butt hinges, medium weight, cold rolled mild steel omplete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel omplete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm.

S & F in repair aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed lenght of bolt 250mm.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repair Aluminum anodized tower bolts 150mm length.

S & F in repair mild steel barrel tower bolts 150mm length ,stove enamelled black ,with bright bolt and fixed complete all as specified and directed.

S/F in repair aluminium handles cast type anodized 150mm size.

S/F in repair Mild steel pressed handles 150mm length , oval type, stove enamelled black complete all as specified and directed .

S & F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel omplete all as specified and as directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm.

M & L for hacking out old broken sheet glass and fixing 3 mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm.

M & L for hacking out old broken figured glass and fixing 3 mm figured glass pin head type , ordinary quality and glazing with oil putty in square n. exc 0.5 sqm.

S&F in repair Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples.

S & F in repairs Harrison rails, aluminium alloy with fixing brackets, stops, rollers etc

S &F Anodised aluminiumpowder coating frame of standerd section for doors, windows, ventilatorsand partitions with double rebates including joining cleat for fixing etc. complete all as specified

M&Lfor Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified

M&Lfor Powder coated aluminium window and ventilator shutters, side hung type without sash bars/Sliding track type with locking device aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately)complete all as specified

M&L sheet glass 4.8 mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed

S & F double action floor spring Hydraulically regulated made up of minimum 1.25mm thick aluminum alloy alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs.

S & F in repair Mortise lock vertical type, size 100 mm aluminium 4 levers.

S & F in repairs Door closer hydralically regulated( aluminium extuded body), designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg.

Dismantling wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S & F aluminum snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed by Engr-in-Charge.

S & F Gypsum Board 12mm thick in ceiling fixed with screw as suitably placed in false ceiling grid made of Aluminum all as specified and directed by engr-in-charge.

M & L of 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed.

M&L for preparing newly ceiling surface and applying three coats of white washing complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed by Engineer in Charge.

M &L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed .

S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S &F in Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed.

S & F Steel windows or ventilators with top hung shutter incl hinges ,steel peg stay, with glazing bars all as specified and directed.

S&F in Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed by engr-in-charge.

M & L for sheet glass 3 mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm.

M & L for figured glass 3 mm figured glass pin head type , ordinary quality and glazing with oil putty in square n. exc 0.5 sqm.

Disconnecting existing water tank exc 500 ltr and nexc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt etc from tanks and from mouth of circulatring pipes and re-fixing in position all as directed compete

All as per Item No 72 above but exc 250 and n.exc 500ltr capacity complete all as directed

Dismantling water tank of exc. 500ltr but n.exc 1000ltr capacity and removing from site.

All as per Item No 74 above but exc 250 and n.exc 500ltr capacity complete all as directed

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank (cylindrical vertical with closed top ) 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection.

All as per item No 76 above but 1000ltr capacity complete all as directed

S&F in repair 500 Ltr PVC Water Tank Cover

S & F ball brass valves 20mm high pressure,with polyethene float and float and flynut complete,screwed for iron pipe or brass ferrule and fixed

S & F in repair ball brass valves 20mm high pressure,with polyethene float and float and flynut complete,screwed for iron pipe or brass ferrule and fixed

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc complete all as directed

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc all as directed

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as directed

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc all as directed

S&F in repairs 20 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed

S&F in repair swivel shower rose 100mm size of PTMT any colour for fixed with 15mm bore GI pipe complete all as directed.

S&F in repairs Bib taps, fancy type cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for iron pipe or for brass ferrule.

S&F in repairs Bib taps, fancy type chromium plated cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for iron pipe or for brass ferrule.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, 20mm with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs Waste coupling of PTMT 32 mm for wash basin and min wt 45 or 60gms complete all as specified

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F in repairs PVC connection 15mm bore with PTMT nuts and 600mm long.

Demolition and breaking up drain pipes any description (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar

S&F 75mm PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F 75mm PVC SWR pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified

S&F 110mm PVC SWR pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified

S&F in repair 75mm bore PVC SWR bends with access door of any radius complete all as spcified.

S&F in repair 75mm bore PVC (SWR) vent cowl, complete all as specified

M&L in repair PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door

M&L in repair PVC (SWR) branch piece double (double ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door

S&F in repair 110mm bore PVC bends with access door of any radius complete all as specified.

S&F in repair 110mm bore PVC (SWR) vent cowl, complete all as specified

M&L in repair PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 100mm bore pipe with access door

M&L in repair PVC (SWR) branch piece double (double ‘Y’) equal or unequal with oval access door suitable for 110mm bore pipe with access door

M&L in repair for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repair gully trap 110/125 mm dia with grating including jointing to fixed in cement concrete 1:2:4 type B1 complete all as directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

S & F in repair waste fittings, brass, chromium plated for wash basin,sink etc . with long screwed shanks and fly-nuts, flange and bedded in red lead cement and other end fixed with 40mm dia.

S&F Sink made of stainless steel 1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495x420mm bowl size 410x330x160mm complete all as specified and as directed

S&F Sink made of stainless steel with drainage board1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and as directed

S&F in repair Vitreous China half stall urinals bowel type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, and union fo discharge pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe

S&F in repairs Tubular towel rail 20mm dia 600mm long CP complete all as directed

S & F in repair CP floor gratings 100mm dia with o without waste hole of PTMT (mim waight 40 grms) all as directed by the Engr-in-Charge

S&F waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/ flush tankfixed in repairs. complete all as directed by Engr-in-charge.

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed

M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed

M&L for polythene flim black 50 micron laid in sunken floor complete all as directed

M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type A0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 300x300mmx7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:6).

Ditto all as per above item No.128 above but in CM(1:3) 10mm thick rendering in skirting all as per specified and directed.

M&L Glazed Ceramic Coloured Tiles, 300X200X7mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified.

M&L machine cut cudappah stone slab 20-25 mm thick over cement screed base 20mm thick, 1.6 CM ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Demolition of cement concrete any description and in any position all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors

M&L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in I st class H.W. sectional area n. exc. 6 Sqm.

S.R.M.K Enterprises

Shri Sant Cosntruction

BSK Construction

M/S S H KHAN ENTERPRISES