Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.1 L
EMD Value
₹18,247
Closing Date
26 Oct 2026, 5:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer_Mayurakshi Electrical and Mecha
Office of the Executive Engineer Mayurakshi Electrical and Mechanical Division Benimadhab More Suri Birbhum
Replacement of damaged gate shutter at ch- 0, Ch- 342.00, Ch- 910.00 Ch- 1418.00 of MBBC in the district of Birbhum under MEMD during 2026-27.
2026_IWD_5079828_2
WBIW/EE/MEMD/e-NIT-11/2026-27
Open Tender
MECHANICAL
Percentage
90 days
Santhia
Please refer Tender documents.
8 documents required · 8 mandatory
₹18,247
13 Oct 2026
13 Oct 2026
27 Oct 2026
14 Oct 2026
26 Oct 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old existing unservicable damaged draw/flap gate shutter of distributories/ branch canal/minor canal/channel completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, hire charges of machineries, like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading with all lead & lift.] | 513.23 | Nos | 6.94 | ₹3,561.82 |
| 2 | Dismantling of damaged embeded part like guide channel/bottom seal beam/top runner of gates of distributories/branch canal/minor canal/channel from civil structure as directed by the Engineer-in-charge.The cost of man power employed for dismantling and hire charges of Tools and Plant, scaffolding charges etc. Payment will be made on actual length of Guide Channel replaced. | 28.8 | Nos | 247.99 | ₹7,142.11 |
| 3 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Distributories /BranchCanal /Minor Canal/Channel as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The Cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification . | 1,945.45 | Nos | 158.03 | ₹3,07,439.46 |
| 4 | Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of distributories/branch canal/minor canal/channel made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The Cost includes cost of Materials, hire charges of Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). | 1,411.34 | Nos | 173.84 | ₹2,45,347.35 |
| 5 | Bearing no.51123 (SKF)(Thrust bearing). | 12 | Nos | 5,446.53 | ₹65,358.36 |
| 6Supplying, fitting & fixing M.S fabricated wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size ms hub to accomodate any size of G.M/C.I nut. The rim and four nos arm of wheel are made of 25mm. to 36mm. dia m.s rod complete as per direction of the Engineer‐in‐charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like bending machine, lathe machine, grinding machine welding set, tools & tackles etc including carriage loading & unloading. | |||||
| 6.01 | a) upto 60 cm dia. MS wheel. | 153 | Nos | 165.33 | ₹25,295.49 |
| 7 | Supplying, fitting & fixing Cast Iron Nut as per requirement having 1.5/2 T.P.I square thread and fitting for screw gearing arrangement, parfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of Engineer In Charge. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, hire charges of machineries, tools & tackles etc including carriage loading & unloading. | 39.6 | Nos | 588.37 | ₹23,299.45 |
| 8 | Supplying, fitting & fixing of screw hoisting arangement made of MS bottom plate, top plate, coller with necessary holes on base plate and top plate to accomodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 ‐2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately. | 232.56 | Nos | 206.66 | ₹48,060.85 |
| 9Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN‐8/EN9/forged Cl‐4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer‐In ‐ Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.96 MB
2911.pdf
Tender Documents • 0.50 MB
BOQ_5184657.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .