Special Repair of Govt. Senior Secondary School at Rakkar, Distt. Kangra (HP) (SH. Providing and fixing 0.6mm thick prepainted sheet roofing by replacing old sheet roofing, P/F door, windows frames and shutter etc.)

Amount

Dismantling roofing including ridges, hips, valleys, gutters etcetera stacking the serviceable materials and disposal of un-serviceable materials within all lead, lifts and other incidentals. The rates including sales tax or any other taxes imposed by the Government.

Dismantling ballies in posts, purlins or rafters including stacking the materials within all lead, lifts and other incidentals. The rates including sales tax or any other taxes imposed by the Government.

Demolition of brick work above G.L. upto floor two level in Mud mortar including stacking of serviceable materials and disposal of un-serviceable materials within all lead, lifts and other incidentals. The rates including sales tax or any other taxes imposed by the Government.

Dismantling doors, windows and clerestory windows, ventilators etcetera (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etcetera complete and stacking them within all lead, lifts and other incidentals. The rates including sales tax or any other taxes imposed by the Government.

Excavation in foundation trenches etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/ dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, or as directed by the Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular or polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals. The rate including, Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton) per square millimetre with cement contents not less than 320 kg (three hundred twenty Killograme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete, 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), mix designed, so as to give a compressive strength corresponding to RCC grade M-20 (M-twenty five) with minimum cement contents of 320 Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, as per HPPWD specifications or as directed by the Engineer-in-Charge excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness upto all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete, 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), mix designed, so as to give a compressive strength corresponding to RCC grade M-20 (M-twenty ) with minimum cement contents of 320 Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, as per HPPWD specifications or as directed by the Engineer-in-Charge excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/ thickness upto all floor level. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing wood work second class deodar wood in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, 40mm (forty millimerters) thick frame of second class Deodar Wood vertical style including bottom/lock/top rail and 6mm (six millimeters) thick glass pans above lock rail and 12mm (twelve millimeter) thick pre laminated water proof ply below lock rail shutter for doors including bright finished/black enameled iron butt hinges with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including Octroi, Toll Tax, Sale Tax or any other taxes imposed by the Government.

Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with 10mm (Ten millimetre) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (Thirty into ten into fifteen millimetre) 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. (a) 250x10mm (two hundred fifty into ten millimeters).

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:5 (one cement isto six five) in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diameter with prepainted limpet and rubber washers complete with all accesseries as required as per HPPWD specifications or as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimeter) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating +back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks and bolts and nuts 6mm (six millimeter) diameter and prepainted G.I limpet and bitumen washers complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing valleys 60cm (sixty centimeters) overall with 0.60mm (Zero point six zero millimeter) thick pre painted steel sheet in roofing (kolermetal or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 0.63mm (zero pint six three millimeters) thick plain GI (galvanized iron) sheet 15cm (fifteen centimeters) wide 45cm (forty five centimeters) deep over all semi-circular plain G-I sheet gutter with iron brackets 40x3mm (forty into three millimeters) size, bolts, nuts and washers etc. complete including making necessary connections with rain water pipe complete as per design/drawings complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government:- In trusses and trussed purlins in buildings.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government:- In beams, tees, flat etc.

Providing and fixing MS round holding down or anchor bolts with nuts and washers plates complete, as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government:-

Providing and fixing M.S. black plain sheet 1.66mm to 2.00mm (one point six six millimeter to two point zero zero millimeters) thick in facia/eaves boards/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (base members of steel work shall be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall faces 100mm (One hundred millimeters) diameter Poly Vinyl Chloride (D-plast or equivalent) rain water pipes of working pressure not less than 4.5 Kg (four point five kilogramme) per square meter including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked cast iron holder bats including steel bolts to P.V.C/sand cast iron/cast (spun) iron pipes embedded in and including cement concrete block 100mmx100mmx100mm (one hundred millimeters into one hundred millimeters into one hundred millimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) mix, including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 75mm (seventy five millimeter) diameter/size pipe.

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast or equivalent) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. PVC plain bend 150mm (one hundred fifty millimeters) dia.

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast or equivalent) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. PVC plain shoes 150mm (one hundred fifty millimeters) dia.

Providing and fixing 8mm (Eight millimetre) thick partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surface under coat with enamel and finishing coating with flat oil paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and stopping with paint other then white complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Distempering with dry distemper of approved brand and manufacture(Two coats) and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. plain grills of required patterns in wooden/steel frames of window etcetera with M.S. flat, square or round bars bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with aluminium paint, brushing to give an even shade including cleaning the surface of the dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of Toll Tax Sales tax or any other taxes imposed by the Government.

rupinder Singh