Construction of 07 No. rooms with Toilet Block and Pantry as office accommodation for the officers on the roof top of existing structure as per the available space on roof top Old Civil Wing at Anti Corruption Bureau Office Complex

Amount

Providing and fixing of panels for walls and roofs. The roof shall be provided 30mm thick puff insulated panel make Sintex or 0.50mm thick precoated /precolored sheets. The roof sheets are laid over a frame work of trusses, purlins and rafters fixed using suitable fasteners. A 0.50mm precoated/precoloured steel sheets ridge cover of 0.40m from the eaves wall and 0.30m from the gable wall. The wall shall be made in sandwich panel system using 2 No’s of precoated/precoloured sheet of 0.50mm thick fitted with 50mm thick puff with bulk density of 40 Kg/cum. The puff panels shall be Make: Sintex / Llyod / Jindal continous panel system. The panels shall be inserted one by one in to “U” shaped ground track of size 52.5x35x1.25mm thick made from G.I sheet/sheet coil. The bottom track shall be fixed to the concrete platform level by suitable fasteners screwed on to PVC expandable screw cap. The top of the walls would be concealed with “U” shaped top track of size 52.5x35x1.25mm made from G.I. sheet/sheet coil. Roof slope shall be 1:4 approximately as per seismic zone-iv. The walls height shall be 3 Mtrs. At eaves and 3.36 Mtrs at central gable. (Area = 49'-0" x 29'-0" = 1421.00Sft) (COMPLETE JOB IN ALL RESPECT INCLUDING BELOW SUB ITEMS)

Demolishing brickwork manually/ by mechanical means including stacking of servicable material and disposal of unservicable material withinn 50 mtr lead in cement mortar.

Demolishing brick tile covering in terracing including stacking of sevicable material and disposal of unservicable material within 50mtr lead.

Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreagate 20mm nominal size) (Crushed)

Centring and shuttering including Strutting propping etc and removal of form work for walls any thickness.

Structural steel work riveted or bolted in built up section trussess and frame work including cutting hoisting fixing in position and applying a priming coat of approved steel primer and two coats of enamel paint.

Providing and fixing aluminium work for doors, Windows ventilators and partitions with extruded built up standars tubular sections/appropriate Z. sections and other sections 3.25x1.5mm thick of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i:e at top, bottom and sides witth required EPOM rubber /neuropren gasket fell etc aluminium sections shallbe smooth rustfree straight mitred jointed mechanically whereever requred including snap beading for glazing paneling C.P brass stainless steel screws including door closers stopper and all accessories required as per archetectural drawing and directioin of Engineer-in-charge

Providing and Laying vitrified floor tiles in diffrent sizes (thickness to be specified by the manufacture) with water absorbtion less then 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. size of tile 60x60cm

Providing and fxing of tiled false ceiling of approved materials (12.5mm thick sqr egde PVC laminated Gupsem tile of size 595x595mm mad eof gypsm palsterd bord manufactured from natural gypsum laminated with white 0.16mm thick fire retardent PVC film on the face side and 12 micron metal Zed polyester on the back side with all edges sealed) with the face side PVC film whict both around the raps the edges and in true horizontal level suspended on linter locking metal grid of hot dipped galvonised steel sections consisting of main 'T' runner with suitably spaced joints to get requiored length and size of 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200 x 600mm and secondary cross "T" of length 600mm and size 24x25mm and made of size 0.30mm thick minumum sheet to be interlocked and midel of 1200x600mm the panel to form grids of 600 x 600mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/ making, opening for services like diffusers, grills light fittings, fixtures, smoke deterctors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fastners, 4mm GI adjustable rods with galvonised butterfly level chlips of size 85x30x0.8mm spaced at 1200mm center to center along main T, betweeen exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer in-Chanrge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to I.S: 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required W.C pan with ISI marked white solid plastic seat and lid. (Cera/Hindware) (01 No.)

Providing and fixing white viterous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively with auto matic flushing systern with CI / MS brakets stadard size of flush pipe and CP brass spreders with brass union and GI clamps complete including painting of fitting and brakets cutting and amakiing wood the walls and floors wherever required (Range of 2 urinal basins with 5ltr PVC white autiomatic flushing systern af approved quality) (Cera/Hindware). (03 Nos)

Providing and fixing white vitreous china wash basin with CI / MS brakets 15mm CP brass pilar taps 32mm CP brasss waste of standard patern inincluding painting of cutting and making goos the walls wherever required wash basin of size 630 x 450mm. (02 Nos)

Providing and fixing of CP fiting jet with rod complete (approved by Engineer In-charge)

Providing and fixing CP brass Toilet Paper holder.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106gms. (02 nos)

Providing and fixing of Towel rod complete with brackets fixed to wooden cleat with CP brass screws with concealed fittings arrangement of approved quality and colour (450mm long towel rod with total length of 495mm x 78mm wide and effective height of 88mm weighning not less than 170gms. (02 Nos)

Providing and fixing miror of superior glass (of approved quality) and of required shape and size with plastic moulded framed of approved make and shade with 6mm thick hard board backing (Rectangular shape 453 x 357mm)

Providing and fixing of CP brass nose bib cock of approved qaulity conforming to ISI standard and weighing not less thatn 810gms. 15mm nominal bore (approved by Engineer in-charge). (jaguar, Marc or equivalent). (03 Nos)

Providing and fixing of G.I pipes complete with G.I fittings & clamp including cutting making good the walls (15mm)

Providing and fixing an wall face unplasticised rigid PVC water pipes including jointings the same.

(75mm dia)

(110mm dia)

PVC water tank of 2000ltr capacity of ISI mark (01 No)

kitchen sink (1'-6" x 1'-6" ) = 1 No.

Wooden Table (2'-6" x 4'-0") = 1 no., Cabinet (2'-6" x 4'-0") =1 No.

Disposal of dismantling mulba /excavation earth by M.T including loading/ unloading and acarriage complete from designated sites and its disposal as per direction of Engineer-in-charge all inclusive (average lead of 10 kms) outside the municipal limits.(trolly)

sahvik infra pvt ltd

M/S RENU DEVI CONTRACTOR

SHAINGAR RAM

AKHIL GUPTA

RAHUL GUPTA