Maintenance of newly constructed railway line, rectification of minor deficiencies and some balance work in PPTA-PHLG Section.

Item Breakup - B-Schedule B

Providing and laying Pitching with Stone cum Boulders, weighing not less than 35kg each with voids filled with cement sand mortar 1:4 on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications (filter media to be paid separately under the relevant item). Rate is excluding cost of cement which shall be paid extra under relevant item. Total 101175.78

Item Breakup - B1-Schdeule B1

prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 14550 193.7 2818335 30 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Painting with synthetic enamel paint of 13.62 approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under Sqm 50 226.25 11312.5 31 coat of suitable shade with ordinary paint of approved brand and manufacture Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 32 13.99.1 One or more coats on old work Sqm 10020 102.8 1030056 Painting with aluminium paint of approved 13.100 brand and manufacture to give an even shade: 33 13.100.1 One or more coats on old work Sqm 10500 96 1008000 16.0 ROAD WORK 16.1S ROADS Dry brick pitching half brick thick in drains 16.12 including supply of bricks and preparing the surface complete : 16.12.1 With common burnt clay F.P.S. (non modular) Sqm 2000 644.05 1288100 34 bricks of class designation 7.5 17.0 SANITARY INSTALLATIONS 17.1S General DANAPUR DIVISION-ENGINEERING/EAST CENTRAL RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 2 6515.55 13031.1 35 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.2 White Vitreous China Wash basin size 630x450 Each 5 2226.35 11131.75 36 mm with a single 15 mm C.P. brass pillar tap Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 37 17.28.2.1 32 mm dia Each 30 119.55 3586.5 Providing and fixing PTMT Waste Coupling for 17.69 wash basin and sink, of approved quality and colour. 17.69.1 Waste coupling 31 mm dia of 79 mm length and Each 30 115.3 3459 38 62mm breadth weighing not less than 45 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 39 18.9.1 15 mm nominal dia Pipes Metre 10 244.7 2447 40 18.9.2 20 mm nominal dia Pipes Metre 10 274.3 2743 41 18.9.3 25 mm nominal dia Pipes Metre 10 355.4 3554 42 18.9.5 40 mm nominal dia Pipes Metre 10 563.05 5630.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 43 18.17.1 25 mm nominal bore Each 5 622.4 3112 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 3000 11 33000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 44 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing not Each 12 125.6 1507.2 45 less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 10 208.45 2084.5 46 not less than 110 gms Providing and fixing PTMT, push cock of 18.57 approved quality and colour. DANAPUR DIVISION-ENGINEERING/EAST CENTRAL RLY 18.57.1 15 mm nominal bore, 98 mm long, weighing not Each 150 112.8 16920 47 less than 75 gms 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 48 18.74.2 15 mm nominal bore with 45 cm length Each 19 121.9 2316.1 20.0 PILE WORK 20.1S General Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than 20.3 specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 49 20.3.1 300 mm dia piles Metre 100 3065.6 306560 Extra over single under ream for providing additional bulbs in under reamed piles, under 20.4 specified diameter(only the nos. of extra bulbs are to be paid) 50 20.4.1 300 mm dia piles Each 20 2626.3 52526 Total 21338218.65