PROVISION OF RELIGIOUS BUILDING AT NAVY NAGAR UNDER GE NAVY CHENNAI

Amount

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in Soft/Loose soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, exc 1.5 m wide and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

Plain cement concrete 1:2:4 type D2 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete) complete all as specified and as directed.

RCC M 30 (Design mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs and mass concrete (M-30)

Reinforced cement concrete M-30 Design mix controlled concrete in columns, pillars, piers, posts and structs etc.

Reinforced cement concrete M 30 (Design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork rough finished surfaces of concrete sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surface flat complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns fair finished surface and stanchions complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for concrete type C-2, 1:3:6 (40 mm aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Forming construction joints 50mm deep X 10 mm wide and filled with sealing compound grade 'A' complete all as specified and as directed.

Brickwork in 1:6 CM with fly ash bricks, straight or curved on plan exc 6m mean radius, built in complete all as specified and as directed.

Brickwork 1:6 CM with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in complete all as specified and as directed.

M&L for internal renderning 10 mm thick in CM 1:6 finished with even and smooth surfaces of cement in Internal surfaces of wall & floor complete all as specified and as directed.

M&L for external renderning 15 mm thick in CM 1:4 finished with even and smooth surfaces mixed with wpc of cement in Internal surfaces of wall & floor complete all as specified and as directed.

M&L for ceiling renderning 10 mm thick in CM 1:4 finished with even and smooth surfaces mixed with wpc of cement in Internal surfaces of wall & floor complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

M&L for two coat of oil bond distamper over one coat of primer on newly plastered surfaces incl preparation complete all as specified and as directed.

M&L for two coat of acrylic weather coat newly external plastered surfaces over one coat of primer incl preparation complete all as specified and as directed.

M&L for three coat of white wash on newly plastered surfaces on celing incl preparation complete all as specified and as directed.

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface are complete all as specified and as directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over Rendering 10mm thick on fair faces of brick work or concrete surfaces including screed bed 1:6 complete all as specified and as directed

S & F 2nd Class Hardwood Plain framed, 35mm panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed

S & F Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed

S&F 32 mm thick Flush shutters, solid coreconstruction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for two coat of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width and girth including preparation complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

20mm thick Granite (of any type) work (tablerubbed andpolished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately all as specified and directed for :-

(a) One light point controlled by one switch

(b) One Ceiling fan/Exhaust fan point controlled by one regulator / switch.

(c)One 3 pin socket outlet 5 amps socket on independent board.

(d) One 3 pin socket outlet 5 amps socket on Same Board.

All as per item No. 39 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 2.5 sqmm cable as earthing conductor.

S&F Modular Socket outlet 2 in 1, 3 pin, 6A 2 Module complete all as specified and as directed.

Supply and fix Modular switch flush type single pole one way 6 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

Supply and fix modular Socket 2 in 1, 6 Amps Flush type 3 module 240 Volts complete all as specified and as directed.

Supply and fix modular Socket 5 Amps / 16 amps, 5 in 1 flush type 3 Module 240 Volts complete all as specified and as directed.

Supply and fix modular switch 5 Amps / 16 amps, 5 in 1 flush type 3 Module 240 Volts complete all as specified and as directed.

Supply and fix ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed.

Supply and fix Step type electronic Modular fan regulator flush type2 Module complete all as specified and as directed.

S & F modular white cover plate with frame 3 module

S & F modular white cover plate with frame 6 module

S&F of Modular Metal flush box 3 Module

S&F of Modular Metal flush box 6/8 Module

S&F for sub main wiring/power wiring with 2 runs of 4 sqmm PVC insulated stranded copper conducotr FRLS cable and one run of 4sqmm copper FRLS cable as earth lead in PVC conduit all as specified.

S&F MCB DB SPN 8 way complete in SS enclosure double door type with 200 amps rated busbar.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

(i) SP 6 To 32 AMP

(ii) SPN 32 AMP

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix new electronic meters temper proofLCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH Note old unserviceable meter will be deposited in MES store

Supply and laying LT UG XLPE insulated, armored heavy duty electric cables with aluminum conductor, 1100 volts grade, cross sectional area 10 sq mm 2 core with suitable size of aluminum lugs, gland, nut, bolt and washers etc complete all as specified and directed Note: cable laid along with boundry with proper clamping .

kvs constructions (BID ID -3497626)

YOGAA MANPOWER AGENCY (BID ID -3500354)

HIGH TECH ENGINEERS AND CO (BID ID -3500972)

Banyan Engineers and Contractors (BID ID -3500067)

GK ENTERPRISES (BID ID -3499851)

S.T.S.CONSTRUCTIONS AGENCIES (BID ID -3498689)