Temporary measures for rectification of Blackspot on NH 703A of series 2017 19 in the State of Punjab

Amount

Providing and Marking Centre line, Edge line and Bar Marking with HOT applied thermoplastic compound 2.50mm thick on bituminous surface including refectories glass beads @ 250gms per sqm area by machine including traffic control arrangements as per IRC-35 corrected up to date the finish surface to be level finish and free from streaks and holes complete in all respect such as furnishing all labour, material tools equipment’s including all incidental costs necessary for carrying out the work at site conforms to technical specifications complete in all respect as per MORT&H specification (5th Rev. 2013).

Providing and Marking Painting lines, Dashes and Arrows on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control, conforms to the technical specifications complete in all respect as per MORT&H specification (5th Rev. 2013).

Providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. As per MORT&H specifications and the Satisfaction of Engineer in charge complete in all respect.

90 cm equilateral triangle

60 cm circular

90 cm high octagon

Direction and Place Identification signs upto 0.9 sqm size board. Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing.

Direction and Place Identification signs with size more than 0.9 sqm size board. Providing and erecting direction and place identification retro- reflectorized sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Providing & Fixing Cat Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminum, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973). As per MORT&H specifications and the Satisfaction of Engineer in charge complete in all respect.

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorized panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings.