CONSTRUCTION OF 2 LANE ROB ON REWARI BHATINDA AT LC NO. 112 KM 170/6-7 ON BARWALA AGROHA ADAMPUR BHADRA ROAD (SH-10) IN DISTT. HISAR (PDG. HIGH MAST LIGHT ONLY).

Amount

(I) Wires and Cables Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. HSR 31.9. d) Size 1.50 sqmm ( 48 / 0.20mm).

L) Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. HSR 31.17./ a) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

vi) TPN MCB 6 amp. to 32 amp.

P) Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. HSR 31.21. vi) Galvanized iron pipe 50 mm dia on surface.

(Q) Earthing HSR 31.22: i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. HSR 31.26. xI) 16 Sq. mm 4 Core Ard. Cable .

xIi) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. HSR 31.28. iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. HSR 31.41. v) 4-way,TP&N (Horizontal)(8+12)

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. HSR 31.67. ii) HDPE pipe 90/75 mm outer dia / inner dia

HIGH MAST POLE HSR 31.83: ii) Supply, installation, Testing and commissioning of 16 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge.Make:- Vipin ST Poles/ Skipper/ Philips/ Bajaj/ Volmont. Thickness of Top Section = 3mm (Minimum) Bottom Section -4inni (Minimum) Top Dia = 150mm Bottom Dia = 410mm Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.)

iii) Supply, installation, Testing and commissioning of 20 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge. Make:- Vipin ST Poles/ Skipper/ Philips/ Bajaj/ Volmont. Thickness of Top Section = 3mm (Minimum) Bottom Section =4mm (Minimum) Top Dia = 150mm Bottom Dia = 460mm Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.)

Non Schedule Item: Supply/ errection/ testing / commissioning of timelight distribution board 110 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 TPN MCB, 1 contactor, 1 HRC fuse , 1 Indicator having IP 52 Degree protection all items should be of same make / manufacturer including padestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-inCharge of the work. (Make:- IndoAsian/ Havell's/ C&S).

Non Schedule Item: Supply/ Erection/ Testing/ commissioning of Lanteren Carriage With all Accessories for 16/20 Mtr. High Mast including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge of the work. As per Drawing attached. Make:-Vipin.

Non Schedule Item: Construction of RCC Foundation for 12.5 / 16 / 20 mtr High Mast complete in all respect as per the appended design including the cost of digging sand filling 6" lean concrete 1:8:16 / bricks souling, Bar binding cement concrete (M-20) shuttering, fixing of foundation bolts, refilling, carrying and errection of High Mast on foundation including petty material to complete the job in all respect up to the entire satisfaction of Engineer-inCharge of the work.

Non Schedule Item: S/E of 200 W LED Flood light luminaries with high power LED < 110 Lumens per Watt Philips / Havell's / Bajaj/ Surya make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

J.B.S.Electrical Co.

GALAXY ELECTRIC SOLUTIONS

Rajesh Electric Works

INFERNO POWER AND SAFETY

Chopta Offset Printers