REPAIR TO ROAD NEAR MT SHED IN ZONE 9B AND MT AREA OF 345 MED REGT AT ZONE-10 AT MIL STN TALBEHAT UNDER AGE (I) TALBEHAT

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces, in area exc. 400 Sqm ( depth exc. 50mm and n.exc. 100mm) complete all as specified and directed.

150 mm thick (compacted thicknes) WBM, with coarse agg of grading 2 (63 to 40mm) or of grading 3 (50 to 20mm size), spread in two layer (75 mm each layer), rolled and consoidated to gradient and camber required with granite, trap or basalt complete all as specified and directed.

All as per item No 2 here in before but except material complete all as specified and as directed.

M & L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-30) @ 10 kg per 10 sqm on unsurfaced water bound macadam incl preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

M & L for premix bituminous macadam laid/ rolled and compacted to required gradient and camber with Paving bitumen VG-30 content of 4% by weight of total mix (consolidated thickness 75 mm or less) for correction of undulation / camber complete all as specified and as directed.

M & L for repair to pot holes any depth not exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying a tack coat of bituminous primer (Paving bitumen VG-30) @ 5 kg per 10 sqm, putting in premixed bituminous macadam well rammed and sealed with binder (Paving bitumen VG-30) 9.8 kg per 10 sqm blended with 0.09 cum of stone chipping 6.3 mm size and again well rammed (incl. supply of premixed macadam binder and chippings) depth of potholes exc. 30 mm all as specified and directed .

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. all as specified and directed

M & L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-30) @ 5 kg per 10 sqm on existing black top surface all as specified.

M&L for bitumenous semi dense Asphastic concrete 30mm consolidated thickness using 5.5% of binder content by weight of total mix using paving bitumen VG-30 laid/Spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 10 ton power roller and compacted to required gradient and camber complete all as specified and as directed

Demolition of brick work built in cement mortar or lime mortar complete of any description complete all as specified and as directed

M & L for Continous fly ash brick edging; with width equal to the width of the brick; laid dry on end vertically complete all as specified and as directed.

M & L for laying hot applied thermoplastic compound (paint) 2.5 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification no. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like exc. 10 cm wide colour white or golden yellow complete all as specified and as directed

M&L for as in repairs stone kerb (sand stone)of roughly squared stone of size 15cmx30cmx45cm ,dressed so that the maximum depression from straight edge held against the dressed surface shall not exceed 6mm for top and exposed surface of sides and 20mm fro the rest of surfaces jointed in cement mortar 1:6 complete all as specified and directed.

M & L for painting lines, dashes, arrows, letters etc on road pavements and the line exc 10 cm wide with hot mixed road marking thermoplastic paint by using mechanical machine in white/yellow colour complete all as specified and as directed.

S & F polycarbonate moulded body reflective pavement marker (Road Studs) of size (20mm height, 90mm width & 100mm length) with minimum reflective area 13 sqcm on each side and slope to the base shall be 35+/-5 degree to the base and complete all as specified and as directed

S&F in repairs PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints ,laid in trenches or in floor complete all as specified and directed.

M/S A.R BUILDERS

M/s Indu Enterprises