PROVN OF WATER SUPPLY TO DOU, PROVN OF LT VEH PARKING, 02 X SENTRY POST AND GUARD ROOM MTG SHED NEAR BLDG NO. OWT-356, SPL REPAIR TO IRP AT PUMP HOUSE NO. 03, VOLTAGE STABILIZER OF PH NO. 02 AND O3 ALONGWITH CONNECTED WORKS AT LIKABALI AND SPL REPAIR

Amount

SCHEDULE "A" PART - I [B/R WORKS]

Surface Excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

Excavation in Trenches not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Labour for Spreading and Levelling of soil obtained from Excavation in layer n.exc. 25 cm thick including Well Ramming and watering as required complete all as specified and as directed.

M&L Hardcore Broken Stone or Boulders, Gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deem to be included in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunch-ings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished Surfaces of Concrete, complete all as specified and as directed.

M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n. exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L Mild Steel Tubular Trusses including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Glazed Ceramic Coloured Tiles 300x450x6.0-7.0mm thick (1st quality) conforming to IS:13753, in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) 40mm thick in Flooring, etc., Laid in Alternate Panels, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Glass Dividing Strip 38mm Wide and 3.0mm thick and inserted in Position, conform to Design, complete all as specified and as directed.

M&L Machine Pressed Pre-cast Concrete Coloured (Terracotta Red or Yellow) Interlocking Paver Block 60mm thick of M-35 Grade, with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean Dry Sand as in Floors, complete all as specified and as directed. NOTE : Clean Dry Sand will be Measured & Paid separately under appropriate Item.

M&L Machine Pressed Pre-cast Concrete Coloured (Terracotta Red or Yellow) Interlocking Paver Block 80mm thick of M-40 Grade, with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean Dry Sand as in Floors, complete all as specified and as directed. NOTE : Clean Dry Sand will be Measured & Paid separately under appropriate Item.

M&L Sand Filling under Floors or in Foundations including Watering (if required) and Consolidation, complete all as specified and as directed.

M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Fair and Even without using Extra Cement including mixing WPC, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Oil Bound Distemper (of approved Tint) over a Coat of Primer, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

SUB TOTAL OF SCHEDULE "A" Part - I

SCHEDULE "A" PART - II [E/M SERVICES/WORKS]

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx. 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm Width) along with all Fitting/Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. including suitable Size PVC Board with 3.0mm thick Plastic Laminated Sheet Cover for mounting Switches, Sockets, Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP 3/5 PIN SOCKET POINT on INDEPENDENT BOARD, complete all as specified and all as directed.

M&L Sub-main Wiring with 2-Run of 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx. 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Casing Capping will deem to be include in the Quoted Unit Rate and the same will be Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wires required for looping, etc. will deem to be include in the Quoted Unit Rate.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6 Amp, 2 Pin & 3 Pin, 2-in-1, Multi-Plug, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F LED Light Fitting 1x20 Watt, 220 Volt, AC Decorative Box type with Driver, Holder, LED Tube Light and connecting up with and including Flexible Copper Conductor Cable, 3 Core of suitable Size and Length, complete all as specified and as directed.

S&F Wall/ Cabin Fan 400mm Sweep, Energy efficient (5 Star rated), Single Phase, 230/240 Volt with Fixing Arrangement and, Electronic Regulator stepped type, Providing Electric Connection including Copper Conductor Cable of suitable Size and Length, complete all as specified and as directed.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used SPN 4-way, 240 Volt AC, Double Doors, Front Openable, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

S&F MCB 32 Amp to 40 Amp, Single Pole & Neutral, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

Supply and Laying or Fixing or Passing through Pipe, 1100 Volt grade Heavy duty Cable with PVC insulated Aluminium Stranded Conductor served with an Inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed 10 Sqmm Nominal Cross Section, 2 Core in Service Connection, complete all as specified and as directed.

SUB TOTAL OF SCHEDULE "A" Part - II

SCHEDULE "A" PART - III [REPAIR/MAINT EXTERNAL WATER SUPPLY]

Excavating in Trenches, not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for laying of Water Pipe Lines, etc., Forming Surfaces to required Foundation/ Gradient and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps with Surplus Soil along the Route of the Water Pipe Lines, etc., in soft/loose soil, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

Taking up or down Steel Tubing 25/32mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

Taking up or down Steel Tubing 40/50mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

Taking up or down Steel Tubing 80mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

Taking up or down Steel Tubing 100mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

S&F Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings/ Connections, laid in Trenches or on Floors or fixing to Walls or any other situation, complete as all specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

S&F Steel Water Tubing 25mm bore (dia), Galvanised, ‘medium grade’ with all Fittings/ Connections, laid in Trenches or on Floors or fixing to Walls or any other situation, complete as all specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

S&F Steel Water Tubing 40mm bore (dia), Galvanised, ‘medium grade’ with all Fittings/ Connections, laid in Trenches or on Floors or fixing to Walls or any other situation, complete as all specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

S&F Steel Water Tubing 50mm bore (dia), Galvanised, ‘medium grade’ with all Fittings/ Connections, laid in Trenches or on Floors or fixing to Walls or any other situation, complete as all specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

S&F Steel Water Tubing 80mm bore (dia), Galvanised, ‘medium grade’ with all Fittings/ Connections, laid in Trenches or on Floors or fixing to Walls or any other situation, complete as all specified and as directed. NOTE : Earthworks will be Measured and Paid separately under appropriate Items.

S&F Steel Water Tubing 100mm bore (dia), Galvanised, ‘medium grade’ with all Fittings/ Connections, laid in Trenches or on Floors or fixing to Walls or any other situation, complete as all specified and as directed. NOTE : Necessary Earthworks will be Measured and Paid separately under appropriate Items.

S&F Gun Metal Globe/ Gate Valve 20mm bore (dia) with Iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve of any description, complete all as specified and as directed

M&L Cast Iron Butter-fly Valve PN 1:6 Class 125, 80mm bore (dia), Wafer type, Flanged and drilled both Ends, ISI marked, conform to IS:13095 with all Jointing Materials such as suitable Size Mild Steel Nuts, Bolts, GI Washers, Rubber Gasket, etc. and Testing against Leakage including Taking out/ down Unserviceable Butter-fly Valve, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 80mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts, Nuts and Testing including Taking out/ down Unserviceable Sluice Valve, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 100mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts, Nuts and Testing including Taking out/ down Unserviceable Sluice Valve (3 Nos Only), complete all as specified and as directed.

M&L Cast Iron Sluice Valve 150mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts, Nuts and Testing, complete all as specified and as directed.

M&L Construction Valve Pit Chamber of Size 60x60x60 Cm (Internal Dimension) with 100mm thick Lean Concrete 1:4:8 (40mm graded stone aggregate) at Foundation, 200mm thick Pre-cast Cement Concrete Block Walling in Cement Mortar 1:4 with Solid Blocks of Size 300x200x200mm or 300x200x100mm having Compressive Strength not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregates), Rendering 15mm thick to Block Walling in Cement Mortar 1:4, Internally Complete Surfaces (except PCC Foundation Bed), Externally upto 150mm below Normal Ground Level, Providing Mild Steel Sheet Cover 3.15mm thick, fitted Hinges, Handle and Locking Arrangement welded on Mild Steel Angle Iron Frame 40x40x5.0mm at Top of Valve Pit Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregates) 100mm thick provided at Top of Block Walling, applying Two coats of Black Paint over a coat of Red Oxide Zinc Chrome Primer to all Steel Surfaces after Preparation of Surfaces including necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre, complete all as specified and as directed.

M&L Construction Valve Pit Chamber of Size 100x100x100 Cm (Internal Dimension) with 100mm thick Lean Concrete 1:4:8 (40mm graded stone aggregate) at Foundation, 200mm thick Pre-cast Cement Concrete Block Walling in Cement Mortar 1:4 with Solid Blocks of Size 300x200x200mm or 300x200x100mm having Compressive Strength not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregates), Rendering 15mm thick to Block Walling in Cement Mortar 1:4, Internally Complete Surfaces (except PCC Foundation Bed), Externally upto 150mm below Normal Ground Level, Providing Mild Steel Sheet Cover 3.15mm thick, fitted Hinges, Handle and Locking Arrangement welded on Mild Steel Angle Iron Frame 40x40x5.0mm at Top of Valve Pit Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregates) 100mm thick provided at Top of Block Walling, applying Two coats of Black Paint over a coat of Red Oxide Zinc Chrome Primer to all Steel Surfaces after Preparation of Surfaces including necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre, complete all as specified and as directed.

Taking out (Unloading) all Old Catalyst from Oxidation Chamber of IRP having capacity 4000 GPH with Proper Care, Cleaning complete Pipes, Butter-fly Valves, etc. of any Capacity, Flow and Height by Opening the Manhole Cover disconnection and including Removing the Waste Materials up to a distance not exc. 100.00 Metre away from the Site of Work, Spreading and Levelling, complete all as specified and as directed.

Taking out (Unloading) all Old Rusted and Muddy Filter Media like Sand, Gravels, etc. from Iron Removal Filter Vessel with Proper Care, Cleaning complete Pipes, Butter-fly Valves, etc. of any Capacity, Flow and Height by Opening the Manhole Cover disconnection and including Removing the Waste Materials up to a distance not exc. 100.00 Metre away from the Site of Work, Spreading and Levelling, complete all as specified and as directed.

M&L Preparing Inner Surfaces of Empty Iron Removal Filter Vessal and Flow & Height (i.e. after Taking out of Old Catalyst, Muddy Filter Media like Sand, Gravels, etc.) of any Capacity, Flow and Hight by through Scrapping Old Paints, Removing Rust, etc. with Emery Papers/ Eco Friendly Chemicals, Through Cleaning Complete and applying Two Coats of Anti-corrosive Black Bituminous Paints (suitable for Drinking Water Purpose) as per Standard Engineering Practice including sealing leakage by gas welding, complete all as specified and as directed.

M&L Preparing Inner Surfaces of Empty Oxidation Chamber and Flow & Height (i.e. after Taking out of Old Catalyst, Muddy Filter Media like Sand, Gravels, etc.) of any Capacity, Flow and Hight by through Scrapping Old Paints, Removing Rust, etc. with Emery Papers/Eco Friendly Chemicals, Through Cleaning Complete and applying Two Coats of Anti-corrosive Black Bituminous Paints (suitable for Drinking Water purpose) as per Standard Engineering Practice including sealing leakage by gas welding, complete all as specified and as directed.

Supply & Filling in layers New Life Manganese Dioxide (MnO₂) Compound (as approved) to Remove Iron and Manganese from Drinking Water by process of Oxidation and suitable for Use in Filtration Plant and Oxidation Chamber (as per requirements), complete all as specified and as directed.

Supply & Filling in layers New Washed, Cleaned, Dust Free Filter Media (Sand & Gravels) of sizes 3/4"x1/2", 1/2"x1/4", 1/4"x1/8", 1/8" x1/6" (as approved) suitable for Use in Filtration Plant (as per requirements), complete all as specified and as directed.

S&F PVC Strainer, Double Nut type (as approved) as per Site requirements including Taking down/ up Unserviceable Strainer of any description, complete as all specified and as directed.

M&L Mild Steel Bolts and Nuts (as approved) as per Site require-mints including Taking down/ up Unserviceable Bolts, Nuts, Gaskets, etc. of any description, complete as all specified and as directed.

M&L Rubber Gaskets (as approved) as per Site requirements including Taking down/ up Unserviceable Bolts, Nuts, Gaskets, etc. of any description, complete as all specified and as directed.

S&F Pressure Gauge with Fittings (as approved) as per Site requirements including Taking down/ up Unserviceable Pressure Gauge of any description, complete as all specified and as directed.

M&L Disconnecting Defective Air Compressor including Electric Connection and Removing to AGE E/M Store Yard at LIKABAKI MIL STN, Dismantling defective Air Compressor as per direction and in front of Engineer-in-Charge, Repairing and Replacing Unserviceable Spare Parts including Cleaning Serviceable Spare Parts, Greasing, etc. and Re-assembling, Re-install-action and Providing All Connections and Testing, complete all as specified and as directed. NOTE :- (a) Cost of all Materials i.e. Spare Parts and Labour Elements required for Smmoth Functionaing of AIR COMPRESSOR will deem to be included in the Quoted Unit Rate. (b) Quantities of Spare Parts at Item No. 3.32 to 3.37 are Provisional and will be Measured & Paid as 'Supply only' under appropriate Items.

Supply only V-Belt Assembly (as per existing/ as approved) suitable for Air Compressor complete all as specified and as directed.

Supply only Air Pressure Guage (as per existing/ as approved) suitable for Air Compressor complete all as specified and as directed.

Supply only Ball Bearing (as per existing/ as approved) suitable for Air Compressor complete all as specified and as directed.

Supply only Compressure Oil (as per existing/ as approved) suitable for Air Compressor complete all as specified and as directed.

Supply Only Gun Metal Globe/ Gate Valve 15mm bore (dia) with Iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe, complete all as specified and as directed

Supply only Compressure Air Pipe (as per existing/ as approved) suitable for Air Compressor complete all as specified and as directed.

M&L Cutting Cast Iron/ GI Pipes of any Size and bore (dia) and reducing to required Length before Laying and to existing Pipe Lines for Taking up for Branch Connections and Insertion of Specials (as per Site requirement), complete all as specified and as directed. NOTE : Cost of Specials will deemed to be included in the Quoted Unit Rate.

M&L for Lifting of Submersible Pump & Motor Assembly 12.5 HP Capacity alongwith Column Pipe, submersible cable, Safety Rope etc from the existing bore well by employing chain pulley block and Opening/Dismantling Submersible Pump Motor Assembly and stacking serviceable material, complete all as specified and as directed.

M&L Lowering down Submersible Pump & Motor Assembly 12.5 HP Capacity (after Repaired & Testing of Function ability) alongwith Column Pipes of any Size and Length, Submersible Cable, Steel Wire Rope, etc. with the help of Chain Pulley Block and Tool & Plants, Testing on Completion, complete all as specified and as directed.

Supply only Galvanised Iron Steel Pipe 65mm bore (dia) (Each Pipe 3.0 Metre in Length) as Column Pipe, ISI marked, having both Sides Painted, threaded both Ends including Socket duly screwed, complete all as specified and as directed.

Supply only PVC insulated, sheathed Stranded Copper Conductor Water Proof Cable, Flat, Cross-sectional Area 10 Sqmm, 3 Core, 1100 Volt grade, conforming to IS:694, suitable for Providing Connection upto Submersible Pump & Motor 5.5 HP Capacity, complete all as specified and as directed.

S&F LED Post Top Light Fitting 35 Watt (as approved) New Generation, Energy Saving, Environmental Friendly, Long Life, Aesthetically Designed with Symmetrical Light Distribution, Spun Aluminium Landscape Luminaire with High Power LEDs as Light Source, IP-65 protected, suitable for Pole 50/76mm dia, Providing Electric Connections including Taking down Unserviceable Light Fitting of any description, complete all as specified and as directed.

Dismantling the existing pressed steel plate of size 1.25m x 1.25 mtr x 6/5mm thick (side and bottom of tank) from existing OH pressed steel tank,12 M high staging by unscrewing/cutting joints including joining material, complete all as specified and as directed.

S&F Hot Rolled Medium and High Tensile structural steel plates of the size 1.25m x 1.25 m x 6mm in pressed steel overhead water tank (Bottom tier of sides) as per the existing alignment and arrangement including nuts, bolts, washers, lead wool, rubber gasket etc. complete all as specified and as directed.

S&F Hot Rolled Medium and High Tensile structural steel plates of the size 1.25m x 1.25 m x 5mm in pressed steel overhead water tank (Top tier of sides) as per the existing alignment and arrangement including nuts, bolts, washers, lead wool, rubber gasket etc. complete all as specified and as directed.

Taking down Top Cover sheet of pressed steel Overhead water tank 12M high staging, any size and thickness complete all as specified and as directed.

S & F Top cover sheet of pressed steel water tank of the size and thickness as per the existing alignment and arrangement complete all as specified and as directed.

Dismantling Wrought or Mild Steel Works of any description not otherwise provided for, complete all as specified and as directed.

M&L Mild Steel Work such as Bracings, Supports, Clamps and Back Plates, etc., fabricated from Structural Steel Sections including necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any Shape or Size as indicated or directed, complete all as specified and as directed.

S & F water level indicator for 46800 Liter capacity pressed steel overhead tank on 12m high staging, float & board type full scale variety, 2500mm range including testing for satisfactory operation and accuracy including Taking down the old unserviceable water level indicator complete all as specified and as directed.

M&L Preparing Surfaces of Pressed Steel Storage Water Tank 46800 Litre Capacity having 12.00 Metre High Steel Stagging and Removing Rust, etc. by Rubbing with Wire Brush, etc. from Outer Walls and Steel Stagging and applying Two Coats of Aluminium Paint on Outer Surface Area of Tank and Steel Stagging and applying One Coat of Black Bituminous Paint (suitable for Drinking Water Purpose) to Inside Portion of Storage Water Tank and all connected Accessories like all GI Pipes, Valves, Other Fittings, etc., complete all as specified and as directed. NOTE : Materials viz Bamboos, Coconut String, Munj or other Equipment's as require-red for construction of Temporary Structure on Outside of Sump will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account.

SUB TOTAL OF SCHEDULE "A" Part - III

SCHEDULE "A" PART - IV [REPAIR/MAINT OF VOLATAGE STABILIZER]

M&L Taking down Unserviceable Voltage Stabilizer of capacity 25 KVA, 3 Phase, 415 Volt of any Make & Size after disconnecting and removing to AGE E/M Store Yard at LIKABALI for Opening & Checking of Defects and Repair works involves, Re-installing the same in Original Position after repaired and Providing Electric Connection, complete all as specified and as directed. NOTE :- (a) Any Minor Items as well as Any Repair Works involves to Make the Stabilizer functional shall be carried out by the Contractor without any Extra Cost to the Department. (b) Rewinding & Other Parts required to be replaced will be Measured and Paid separately as "S&F"/"M&L" under relevant Items here-in-after.

M&L Control wiring with PVC insulated copper conductor of suitable size (as per existing/ as approved) for Voltage Stabilizer 25KVA Capacity, Three Phase, 415 Volt, including Voltage Stabilizer, Taking down/ out Unserviceable Control Wiring, complete all as specified and as directed.

S&F Anolog Volt Meter Square Type of size 72x72 mm with Range of 30 to 300Volt for Voltage Stabilizer 25KVA Capacity, Three Phase, 415 Volt including Taking down/ out Unserviceable Voltmeter, complete all as specified and as directed.

S&F 3/5 Step Universal PRINTED CIRCUIT BOARD (PCB) (as per existing/ as approved) for Voltage Stabilizer 25KVA Capacity, Three Phase, 415 Volt, including Taking down/out Unserviceable PCB, complete all as specified and as directed.

S&F Synchronous Motor, Single Phase (as per existing/ as approved) for Voltage Stabilizer 25KVA Capacity, Three Phase, 415 Volt, including Taking down/ out Unserviceable Electric Motor, complete all as specified and as directed.

S&F Dimmer Stat, (as per existing/ as approved) for Voltage Stabilizer 25KVA Capacity, Three Phase, 415 Volt, including Taking down/ out Unserviceable Dimmer Stat, complete all as specified and as directed.

S&F Indicator Lamp, Set of Three (RED, YELLOW and BLUE) (as per existing/ as approved) for Voltage Stabilizer 25KVA Capacity, Three Phase, 415 Volt, including Taking down/ out Unserviceable Indicator Lamp, complete all as specified and as directed.

M&L Filling Transformer oil of dielectric Strength not less than not less than 40KV including Taking down/ out Unserviceable Oil, complete all as specified and as directed.

M&L Transporting Unserviceable Transformer, retrieved from Voltage Stabilizer, from AGE E/M Store Yard at LIKABALI to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Transformer with Super Enamelled Copper insulated Wire of suitable Gauge and Weight (as per existing) Providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Transformer to Site of Work after Rewinding, complete all as specified and as directed.

M&L Preparing Old Painted Surfaces of Voltage Stabiliser including Cleaning, Washing, Rubbing and Filling Cavities with Filler, applying TWO coat of Synthetic Enamelled Paint (as approved) with Spray Painting Machine and Writing SM/MES No. with Black Paint, complete all as specified and as directed.

SUB TOTAL OF SCHEDULE "A" Part - IV

PRADIP CHANGMAI

Prova Stores

M/s PRABIR ENTERPRISE