Doulatpur Provide FHTC under JJM

Amount

N.S. Item

PUMPING MACHINERY/RAW WATER PUMP / Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. /1600 LPM 12 MTRS HEAD AT W/W

PUMPING MACHINERY/RAW WATER PUMP / Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. /1200 LPM 40 MTRS HEAD .

PUMPING MACHINERY/CLEAR WATER PUMP / Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. /1600 LPM 40 MTRS HEAD .

CI SPECIALS/CI D/F PIPES / Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials laying jointing, refilling of including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets at water works in position as per specification given in schedule No.II. /150 MM

CI SPECIALS/C I BELL MONTH STAINER CLASS 15 / Bell Mouth 150 mm i/d /BELL MOUTH

ELECTRICAL ITEMS/PANEL BOARD. / (A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm having following items. (At B/Stn.) (A) For Raw Water Pump set 1200 LPM 40 Mtrs Head 2 Nos. a) Main switch as required 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make F) SPP 2 No. of approved make g) Motor starter, Star delta 2 No.for 1200 LPM 40 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as required = 1 No. / 1200X900MM

ELECTRICAL ITEMS/PANEL BOARD. / (A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm having following items. ( At water works) (A) For Raw Water Pump set 1600 LPM 12 Mtrs Head 2 Nos. a) Main switch as required 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make F) SPP 2 No. of approved make g) Motor starter, Star delta 2 No.for 1600 LPM 12 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as required = 1 No. / 1200X900MM

ELECTRICAL ITEMS/PANEL BOARD. / (B) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items. (At W/works) (B) For Clear Water Pump set 1600 LPM 40 Mtrs Head 2 Nos. a) Main switch as per required capacity 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make F) SPP 2 No. of approved make g) Motor starter, Star delta 2 No.for 1600 LPM 40 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as per required capacity = 1 No. / 1200X900MM

ELECTRICAL ITEMS/CABLE WIRE / Supplying erection, testing of ISI marked copper wire for 6 Nos. motors with under ground system in PVC and flexible pipes copper wire size 10 sq. mm complete in all respects with accessories like thimble etc. complete in respects. / 10 SQM COPPER WIRE

ELECTRICAL ITEMS/CABLE WIRE / Supplying erection, testing of ISI marked copper wire for 6 Nos. motors with under ground system in PVC and flexible pipes copper wire size 16 sq. mm complete in all respects with accessories like thimble etc. complete in respects. /16 MM

Supply erection Testing of light fittings including wire in the pump chamber with material upto 10 point including switch buttion plug PVC conduit pipe & copper wire etc as per approved specification complete in all respect.

ELECTRICAL ITEMS/EXHAUST FAN / Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects. /450 MM

ELECTRICAL ITEMS/CEILING FAN / ceilling fan 1400mm/56" / 1400MM OR 56`

MISCELLANEOUS ITEMS/FLOATING ARM / Providing and fixing of 250 mm i/d floating arm including carriage labour for fixing nut and bolt bend etc. complete in all respect. /250 MM

ELECTRICAL ITEMS/LED LIGHT / Providing and fixing of 100 watt LED light with fitting i.e. cable, labour charge,carriage charges complete in all respect /COMPLETE LED LIGHT FIXTURE 100 WATT

ELECTRICAL ITEMS/PANEL BOARD. / Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories :- 1. Incomer Switch 100 Amp 2. Aluminum bus bar chamber of 100 Amp. Capacity 3. Volt Meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp - One Set / 500X1200MM

Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per schedule-IV for a period of 5 year after 12 months during defect liability period 3 months trial run (will be charged to the A/Mtc. estimate. (Operation and maintenance during defect liability period (Operation only)

Operation and maintenance during 1st year after defect liability period

Operation and maintenance during 2nd year

Operation and maintenance during 3rd year

Operation and maintenance during 4th year

Operation and maintenance during 5th year

Bidder Name

Amount

JAI PARKASH GARG(GSTN-NA)

Sh. Sunder Lal Sharma Contractor(GSTN-NA)

DHARAMBIR GROVER CONTRACTOR(GSTN-NA)

JAI PARKASH GARG

DHARAMBIR GROVER CONTRACTOR

Sh. Sunder Lal Sharma Contractor

JAI PARKASH GARG