Connecting and charging the newly constructed facilities under Panki Railway Siding eg S and T building Admin building, Loco work shop In Motions Way Bridge Gumties High Masts etc with available power sources MCC 2 and MCC 3 of CHP at 1x660 MW PTEP P

Amount

PART-A SUPPLY OF FOLLOWING

11/11 KV(UE) Grade, 3Cx120 sqmm Alluminium XLPE Stranded Compacted Conductor, Extruded XLPE Insulated, Insulation Screen of Extruded Semi-Conducting Compound, Metallic Screening of Copper Tape (Earth Fault Current of Metallic Screen- 0.2 KA for 1 sec. per core), Cores Laid up, Extruded FR-LSH PVC Type ST-2 Inner Sheathed, Galvanised Steel Flat Strip Armoured and Overall Extruded FR-LSH PVC Type ST-2 Outer Sheathed Power Cable Confirming to IS 7098 P-2.

11 KV outdoor heat shrinkable cable jointing kit of 120 sqmm size cable.

11 KV indoor heat shrinkable cable jointing kit of 120 sqmm size cable.

Cable Route Marker

HDPE Pipe 140 mm O/D PN-4, PE-80 Grade UV Stabilized for 11 KV cable underground etc. road crossing.as per NBC/CPWD guidelines.

GI Pipe 6" dia

LT Cable Laying from Transformer to LT Panel 3.5 Core X 240 sq. mm 1.1 KV XLPE, Al armoured (Galvanised steel wire/strip) LT cable as per IS:7098 P-1. (In Double length run)

LT Cable Laying from MCC Room-3 to DG Room for Feeder Pillar 3.5 Core x 240 sq. mm 1.1 KV XLPE ,Al, armoured (Galvanised steel wire/strip) LT cable as per IS:7098 P-1. (In single length run)

LT Cable Laying from MCC Room-3 to DG Room for Feeder Pillar 3.5 Core x 35 sq. mm Al, 1.1 KV XLPE armoured (Galvanised steel wire/strip) LT cable as per IS:7098 P-1. (In single length run)

LT Cable Laying from MCC Room-3 to DG Room for Feeder Pillar 3.5 Core x 25 sq. mm Al, 1.1 KV XLPE armoured (Galvanised steel wire/strip) LT cable as per IS:7098 P-1. (In single length run)

320 Amp 415 V Heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.

ST Pole 11 Mtr as per IS-410 SP-55

Stone pad 300x300x75 mm

11 KV Pin Insulator

11 KV Pin with nut

ACSR weasel conductor

G.I. earth wire 5 MM 6 SWG

Aluminium binding wire

Jointing sleeve for ACSR Racoon, weasel

Earthing Complete (MS earthing rod of 20x2500 mm, SWG 6 earth wire, etc.)

Danger board with clamp

Aluminium paint

Red paint

Red Oxide

Top channel 125x65x2240 mm

Dropper channel 100x50x2028 mm for cable supporting

clamp for channels with nut & bolts

P.G. Clamp

Number plate with clamp

11 KV TPMO with polymer insulator complete

3-Phase D. O. Fuse Set complete

MS angle Iron 65x65x6 mm, 2700 mm Long bracing Complete with 4 clamps

T-off Channel 100x50x1300mm with Clamp nut & bolt

Guarding X-arm (MS Angle 65x65x6mm/3.300 Mtr Long 5.8 kg/Mtr with Clamp and nut & bolts

11 KV Lightening arrestor

1.1 KV straight through cable jointing with heat shrinkable jointing kit of 3.5X35 sq. mm size cable

1.1 KV straight through cable jointing with heat shrinkable jointing kit of 3.5X25 sq. mm size cable

GI Pipe 50 mm dia

GI Pipe 100 mm dia

PART -B ERECTION & COMMISSIONING

Laying of HT/LT cable with fixing with MS flat clamps as required along with cable tags at every 40 mtr

Laying of HT/LT cable in direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required, and fixing cable route marker as required.

Laying of HT/LT cable in existing masonry open duct as required

Laying of HT/LT cable in existing RCC/Hume/Metal pipe etc. as required

Laying of HT/LT cable on wall surface with MS flat clamp as required

Indoor type cable termination for 11 KV 3Cx120 sqmm

Outdoor type Cable termination for 11 KV 3Cx120 sqmm

Fixing of 320 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.

Making of end termination with brass compression gland and aluminium lugs of 3.5C X 35 Sqmm PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Al lugs and gland to be supplied by the contractor at his own cost.

Making of end termination with brass compression gland and aluminium lugs of 3.5C X 25 Sqmm PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Al lugs and gland to be supplied by the contractor at his own cost.

Making of end termination with brass compression gland and aluminium lugs of 3.5C X 240 Sqmm PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Al lugs and gland to be supplied by the contractor at his own cost.

Earthing work, burring of Safe Earthing Electrode T-39 Cu Copper Coated, Length up to 3000 mm, outer pipe 76.3 mm x 3.2 inner pipe 42.4 mm x 2.6 mm, terminal Dia12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 mmx 3mm Strip will be extra). Make: As approved in U.P.P.W.D., & C.P.R.I. Certified, all required material to be supplied by Contractor at his own cost.

Earthing work, burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot DipGalvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3 mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P.P.W.D., & C.P.R.I. Certified, all required material to be arranged by the contractor at his own cost.

Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects. all required material GI strip etc.to be arranged by the contractor at his own cost.

Fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. all required material GI wire etc. to be arranged by the contractor at his own cost.

Fixing of 25 mm x 5 mm Copper strip for earthing purpose as required.all required material Copper strip, etc. to be arranged by the contractor at his own cost.

Shifting of 11/.43 KV, 500 KVA T/F, miscellaneous expenditure etc.

Construction of T/F plinth as per respo norm with all cost of labour T&P and material required for proper completion of work.

FRP/MS strip (50x6 mm) Fencing of 11/.43 KV (Sub-Station size-3x3 m (6 ft height including civil work) as per respo specification and all required material to be arranged by contractor at his own cost.

Earthing of T/F as per Respo specification with all cost of labour T&P and material etc required for proper completion work

Erection of ST Pole 11 Mtr IS-410 SP-55

Stone pad 300x300x75 mm

11 KV Pin Insulator with pin & nut

ACSR weasel/Racoon conductor

G.I. earth wire 4,5 MM 6/ 8 SWG

Aluminium binding wire

Jointing sleave for ACSR Racoon, weasel

Earthing Complete

Concreting of 11 Mtr STP pole

Danger board with clamp

Aluminium/Red paint

Red Oxide

MS top channel 125x65x6mm, 2240 mm

MS channel 100x50x6mm, 2028mm Long with clamp, bolts, nuts & washers (Dropper for fuse set)

P.G. Clamp

Number plate with clamp

11 KV TPMO with polymer insulator complete

3-Phase D. O. Fuse Set complete

MS angle Iron 65x65x6mm, 2700 mm Long bracing Complete with 4 clamps

T-off Channel 100x50x1300mm with Clamp nut& bolt

Guarding X-arm (MS Angle 65x65x6mm/3.300 Mtr Long 5.8 kg/Mtr with Clamp and nut & bolts

11 KV Lightening arrestor

Cable Route Marker

140 mm OD PN-4 PE-80 grade UV stabilized HDPE pipe as per IS:4984

1.1 KV straight through cable jointing with heat shrinkable jointing kit of 3.5X35 sq. mm size cable

1.1 KV straight through cable jointing with heat shrinkable jointing kit of 3.5X25 sq. mm size cable

GI pipe 6"dia

GI Pipe 50 mm dia

GI Pipe 100 mm dia

PART-C SUPPLY, INSTALLATION, TESTING AND COMMISSIONING

Supply, installation, testing and commissioning of 500 KVA, 11/0.433 KV, Energy Efficient, (Level-2) i.e. Level-1 (Amendment 4) Copper Wound, Out-door, Delta-Star, Oil Immersed Transformer with Off-Load Tap Changer, Complete in all respect as per BIS: 1180 (Part-1) 2014 Specifications.

M/S APEX CONSTRUCTION COMPANY (BID ID -4907091)