GE863/EWS-T-34 OF 2020-21

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section complete all as specified and directed.

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

Taking down and refixing in the same opening, shutters of any description not exceeding 1.00 Sqm each complete all as specified and directed.

Taking down and refixing in the same opening, shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.50 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkat or frames exc 1.50 sqm but n. exc 4.00 sqm each (without taking off shutters from the frame ) complete all as specified and directed.

Taking down aluminum door shutters exc 1.50 sqm but n. exc 4.00 sqm each and repairing/replacing the damaged or broken brass chromium plated pivot PVC gasket lining around and refixing the shutters in original position complete all as specified and directed.

Taking down aluminum window shutters exc 1.50 sqm but n. exc 4.00 sqm eachand repairing/replacing the damaged or broken brass chromium plated pivot PVC gasket lining around and refixing the shutters in original position complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any type of mortar complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantaling water tanks and removing to store exc 500 Ltr but n. exc 1000 ltrs capacity complete all as specified and directed.

Dismentaling water tanks and removing to store exc 250 Ltr and n.exc 500 ltrs capacity complete all as specified and directed.

Taking down cement plastering of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275 complete all as specified and directed.

All as per item no 21 but except sheet

S&F 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc complete all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed

M&L for one coats of synthetic enamelled paint incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed

M & L for 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc complete all as specified and directed.

S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and directed.

M & L for 18/19 mm thick one side prelaminated Particle board,and other side balancing white lamination, exterior grade, and fixed with screws to timber frame work in cup board shutters/ shelves complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 7 to 8 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.

S & F Second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with screws, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats complete all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 75 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140 mm complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

All as per item no 49 but exceeding 0.5 Sqm in each pane.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repair 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repair 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repairs of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repair 20 mm dia., Aluminium alloy anodised curtain rails with brackets fixed complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

M&L for providing, cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S&F granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite stone over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 including cutting, moulding and mirror polishing etc complete all as specified and directed.

S&F of 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F for machine cut kota stone slab flooring 20-25mm thick over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S & F Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M & L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring / hard standing / footpath complete all as specified and directed.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth without using extra cement complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick cement mortar 1:6 screed bed complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors/skirting etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and including 15 mm thick cement mortar 1:6 screed bed complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and including 15 mm thick cement mortar 1:6 screed bed complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick cement mortar 1:4 backing coat complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and including 10 mm thick cement mortar 1:4 backing coat complete all as specified and directed.

M&L Pre-cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble stone masonry uncourced well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and as directed

All as per above item no 76 but except stone.

M&L precast PCC 1:3:6 type C1 using 20mm graded stone agg as bonder stones set in cement mortar 1:6 complete all as specified and as directed

M&L rendering 15mm thick on fair faces of concrete work in CM 1:6 incl finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of concrete work in CM 1:4 incl finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment on walls complete all as specified and directed.

M&L for applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer completd all as specified and as directed.

M&L for white washing three coats on walls incl preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing complete all as specified and directed.

S&F Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S&F in repair Ball brass valve, high pressure, with polythene float horizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 15 mm bore complete all as specified and as directed.

S&F in repair Ball brass valve, high pressure, with polythene float horizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 20 mm bore complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directedin SSR Part-I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directedin SSR Part-I complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all as specified and directed.

All as per item no 93 but 20 mm bore.

S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

S&F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair bib taps 15mm bore of standard PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair pillar taps 15mm bore of standard PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair towel rail 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S & F in repairs 15 mm bore brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S &F in repairs of 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair push taps brass CP 15 mm of any colour for urinals and fixed complete all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair for PVC Connections 15mm bore with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair for PVC Connections 15mm bore with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 32 mm dia waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair 40 mm dia waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S & F in repairs vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, provision of lime concrete bedding etc complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Excluding supply of pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F grating doom 100 mm size of PTMT (min weight 25 grms) complete all as specified and directed.

S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg/Sqcm fixed to walls, ceilings or in floors etc complete all as specified and directed.

S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/Sqcm, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S & F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 and bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S & F in repair Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 495 mm x 420 mm and bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S & F in repair of stainless steel 1 mm thick plate rack of size 610 mm x 760mm x 250mm complete all as specified and directed.

S & F of bathroom mirror cabinet of size 430 x 330 mm complete all as specified and directed. Make : Cat part No - 551of Prayag or equivalent as approved.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 37023.50

Kusan Enterprises