SPECIAL REPAIR TO INTERNAL ROADS AND ROAD FURNITURE AT MILITARY STATION BARABANKI UNDER GE (EAST) LUCKNOW

Amount

Scarifying or picking gravelled,macadam or bituminous macadam surfaces exc 50 mm and n exc 100 mm deep in area n exc 400 sqm complete all speciified and directed.

M&L Repair to potholes of any depth, not exc 1sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed.

M & L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen grade VG-10 at 10 Kg per 10 sqm complete all speciified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5.00 kg per 10 sq metre complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber and gradient by using power roller 8 to 10 tonne capacity complete all as specified and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials exc 10 cm wide in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 100 mm dia highly reflective reflectors having a pipe (duly powder coated) of 50 mm dia antirust and two small rectangular reflectors of size 70x23 mm each side are provided for better reflectivity in replacement including embedding in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate (size 150x150x300mm) complete all as specified and directed.

S&F of "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

M&L for 1.60 mm thick plane Mild steel, plain, black sheet in wall cladding or direction sign boards and other similar work cut to size holes, punched including round headed screw/welded all as per site requirement complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high painted winted with fluorescent paint completed all as specified and directed.

M & L for Index hands (natural size) or arrows (upto 40cm long) as directed complete all as speciified and directed.

M & L for Stops, commas, short lines, dashes, hyphens, brackets, etc. complete all speciified and directed.

M & L for GI tubing 80 mm bore medium grade, laid in trenches or laid in floors or other purposes as per site requirement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for hard core of gauge not exc 63mm of broken stone or boulders and deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for sub base in pavement, apron etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for floor finishes of pavement, apron etc complete all as specified and directed.

M & L for rolling and consolidating formation surfaces in cutting with hand roller 0.20 to 0.50 tonne complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed.

M&L for Formwork rough finished to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all speciified and directed.

BHARAT ASSOCIATES PVT LTD