Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹35.5 L+₹20,629.80 (0.58%)Rejected-AOC H NO 1 7 1 79 1 ROAD NO 7 REDDY ENCLAVE TEMPLE ALWAL SECUNDERABAD 500 010 | HYDERABAD | TELANGANA | 500010 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹35.9 L+₹57,961.63 (1.64%)Rejected-AOC | L3 | Rejected-AOC Being not L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
REPAIRS TO JOINERY BUILT IN CUPBOARDS ROLLING SHUTTERS AT CERTAIN BUILDINGS IN ZONE D AREA UNDER AGE B R N NO I OF GE NORTH SECUNDERABAD
2023_MES_605001_1
8684
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹80,000
Yes
16 Nov 2023
22 Jun 2023
24 Jul 2023
22 Jun 2023
21 Jul 2023
7 Jul 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.
Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2020 complete all as specified and as directed.
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed
S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed
S & F pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed
S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.
S&F bands, steps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specified and directed.
Preparation of wood surface, treating the back of chowkhat, end of post etc area tarred exceeding 0.1 Sqm but not exc 0.5 Sqm each etc., complete all as specified and as directed.
Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area n.exc 10 Sqm each etc., complete all as specified and as directed.
M&L for cutting holes in brick wall built in cement mortar for inserting hold fast and making good the disturbed portion in cement mortar 1:3 depth of embedded portion exc half brick & n.exc one brick etc., complete all as specified and as directed.
Material and labour for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed.
S & F 30 mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc., complete all as specified and directed.
S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as directed and specified.
S & F 35 mm thick factory made second class hardwood glazed /gauzed and skelton shutters, open rebated & prepared to receive glass/ gauged etc., as in mosquito proof door shutter etc., with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze etc., size of members of shutters as specified in SSR Part I section 8, clause 8.20 (a), and fixed to chowkats complete all as directed and specified.
Supply and fix in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fix butt hinges of 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed
S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as directed and specified.
Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as directed and specified.
S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as directed and specified.
Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed and specified.
Supply and fix in repairs 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with necessary brass screws etc., complete all as specified and as directed.
Supply and fix in repairs 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with necessary brass screws etc, complete all as specified and as directed.
Supply and fix in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed with necessary brass screws etc., complete all as specified and as directed.
Supply and fix in repairs 125 mm long Brass Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type C-11 and fixed with necessary brass screws etc., complete all as specified and as directed.
Supply and fix in repairs 125 mm long Brass Extruded brass handles, fabricated type polished and fixed with necessary brass screws etc., complete all as specified and as directed.
Supply and fix in repairs 2nd class hard wood plain small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exc 200 Cum each complete all as specified and as directed
M & L for applying two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface etc., completed all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as directed and specified.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as directed and specified.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane complete all as directed and specified.
S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as directed and specified.
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L for IInd class hard wood plain fillets of sectional area exc 6& not exc 13 sqcm area .square, rectangular or triangular in section, clean sawn, secured with nails or brads.with bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed.
M&L for IInd class hard wood plain fillets of sectional area exc 13 & not exc 25 Sqcm area .square, rectangular or triangular in section, clean sawn, secured with nails or brads.with bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed.
S&F in repairs 18mm thick Plywood grade BWR type BB , fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.
S&F in repairs 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.
M&L for Decorative laminate 0.9mm thick Type I of texture surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.
S&F in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws, brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging complete all as specified and directed.
S & F in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws, brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electro-galvanised 40mm width of flap fixed with screws complete all as specified and directed.
Supply and fix butt hinges of 50mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed.
Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply and fix in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed.
Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated (Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. (outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing, 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc., complete all as specified and as directed. Make: NCL/ELEXIRMET/M/s ASHWANI & SONS
Supply and fix steel windows (glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. Sections for frame should be of 48mmx50mm, section for mullian should be 48mm x 50mm section for shutter frame should be 47mmx 20mm and section for fixing glass bead should be 12mm x 12mm, 4mm thick plain sheet glass to be used for glazing of glazed shutters, including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc., complete all as specified and directed. Make: NCL/ELEXIRMET/M/s ASHWANI & SONS
Supply and fix steel windows (Fly proof shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. Sections for frame should be of 48mmx50mm, section for mullian should be 48mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing wire mesh should be of 18mm x 0.6mm . 0.25mm dia 1.40mm aperture stainless steel wire mesh to be used for glazed shutters. Make: NCL/ELEXIRMET/M/s ASHWANI & SONS
S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, meter cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc., complete all as specified and as directed Make: SINTEX or equivalent in RAJSHRI, NANDI make as approved by accepting officer.
Taking down steel/aluminium windows/ventilator/Doors complete with frames and shutters (without taking off the shutters) of area not exc 2.00 sqm complete all as specified and as directed.
S&F standard aluminum sections of any Type as in doors, windows, ventilators, partitions etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.
Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for n exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.
Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.
Supply only for 12mm thick Veneered decorative plywood, grade I (with BWR resin) decorative both side faces etc complete all as specified and directed.
S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and directed.
S&F in repair bracket aluminium powder coated (fancy type) for 20 mm dia tubular curtain rod (for item above) complete all as specified and directed.
Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and directed.
Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and directed.
Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and directed.
Material and labour for mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and directed.
Supply and fix mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc., as required complete all as specified and as directed.
Routine maintenance of rolling shutter Area not exc 10.00 Sqm and the maintenance including the following all as specified and directed. (A)Taking down hood covers for carrying out routine maintenance and refixing.(B) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels lath etc and taking down helical springs, rollers and other accessories etc.(C) Refixing the unserviceable accessories such as shafts, helical springs, rollers lath sheets, cast iron wheels, including drilling, welding etc.(D) Cleaning, oiling, greasing etc complete of all movable parts all as required at site. Note- The parts and accessories to be replaced which shall be measured and paid separately and any defects noticed during the period of contract the same shall be rectified by the contractor without any cost.
Supply only mild steel lock plate 150mm width 3.15mm thickness reinforced with MS angle of 35x35x5 mm at bottom including pulling handle sliding bolt etc complete all as specified and directed.
Supply only new helical springs of size n.exc 50 cm as long as required for rolling shutters etc., complete all as specified and directed.
Supply only MS lath 1.25 mm thick for rolling shutter of size and description complete all as specified and directed.
Supply only MS plain sheet 1mm thick as in hood cover for rolling shutters of size and pattern as approved complete all as specified and directed.
S & F Steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing as specified including top cover, anchoring rod, hasp and staple and one sharp coat of primer, erected in position as indicated and including taking down of any thickness etc., complete push pull or manual type complete all as specified and directed.
M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A complete all as specified and directed. .
Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc., complete all as specified and directed.
Supply and fix in repairs false ceiling of Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES ARMSTRONG SILHOUETTE EXPOSED GRID SYSTEM. The tiles should have humidity Resistance (RH of 99%, NRC 0.55 Light reflectance 85% thermal conductivity K=0.052-0.057 w/m k. colour white, fire performance class O class 1 (BS476 Part 6 & 7) in module size of 600 x 600 x 16 mm thick with Bio black coating on the face of the tile, suitable for Green building application, with the re cycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kg per Square metre. Silhouette main rummers & cross Tees to have mitred ends and "birds mouth" notches to provide mitred Cruciform junctions. The Tee sections should have a galvanizing of 120 grams per square metre & passed through 500 hours of salt test complete all as specified and as directed. Note : The quoted rate is deemed to be inclusive of cost of necessary scaffolding work required at site. Make: Armstrong or equivalent as approved by GE
S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc., complete all as specified and as directed
G SATISH REDDY AND CO
Himagiri Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .