Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.0 L
Closing Date
13 Jan 2026, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE
CEO Zp solapur
constructing water supply scheme At mata Ramani nagar Shirl Ma. Tal madha Dist Solapur
2026_SOLAP_1265782_1
constructing water supply scheme At mata Ramani nagar Shirl Ma. Tal madha Dist Solapur
Open Tender
Civil Works
Percentage
180 days
ZP Solapur
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
Exempted
2 Jan 2026
2 Jan 2026
14 Jan 2026
2 Jan 2026
13 Jan 2026
2 Jan 2026
Item No.1 :- Providing and drilling 150 mm dia Borewell as per GSDA recomandation at certified site by geologist with all transportation charges of ridge including mechanical and labour charges etc. Rates As per GSDA Suggetions 2021-22.
Item No. 2 :- Providing and fixing P.V.C. 180 mm 6 kg/cm2 Casing pipe (With Thread) in borewell as per Is 1239 design and drawing including all transportation charges etc. Rates As per GSDA Suggetions 2021-22.
Item N0.3:- Providing Cap for Casing Pipe. Rates As per GSDA Suggetions 2021-22.
Item No.4:- Yield testing charges on successfully borewell measure by 90 degree V Notch etc.complete. Rates As per GSDA Suggetions 2021-22.
Subwork:- Pumping Machinery Providing, erecting and giving test of submersible monoblock pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible monoblock pumpset 1.50 BHP 150 mm Dia
Supplying and erecting flat flexible submersible with copper conductor PVC Insulated flexible cable and pvc sheeted as per I.S 694/1990 of following grade up to 1100 volts 3 core 4sqmm
Supplying and erecting D.O.L.Starter to operate squirrel cage induction Motor Workig on 380-400 V.3 Phase 50 Htz with no volts coil and overload element andPush Button with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser.
Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer
Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
Supplying and erecting set of three pilot Lamp indicating camp with lead colors red/yellow /Blue 230/250 Volt on provided Box /Panel with necessary wiring material connection etc.
Supplying and erecting bank of all polyproulen condenser with the standard capacities of 2,3,5,7,12.50,15,20 and 25 KVAR units of P.F connection for operation on 3 Phase 50 Hz 400 Volts (+/- 10%)J with externally discharging resistance earthling terminals
Providing, Lowering, laying and Jointing HDPE.pipes of following Dia and Class in proper position grade, alignment as conveyance to site of work, cost of jointing material, labour, giving satisfactory hydraulic test etc. ( 90MM 244+67=311 110MM 354+70=424 140MM 610+107=717 160MM 790+116=906 180MM 994+116+1110.)Complete.[DSR2021-22 P.No. 82/I.No
Supplying & erecting fuse bridges with base HC type fuse links 240V, 63A erected on polished wooden block.
Subwork:- Katta & 5000 litre Tank Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete
Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M)
Item No.3 :- Providing and laying in situ cement concrete M10 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing out formwork, compacting,curing etc. complete.(Cement 5.90 Bags/Cum)
Item No.4 :- Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones incement mortar 1:6 in foundation and plinth of inner walls / in plinth of external wall including bailing out water manually , striking joints on un exposed faces and watering etc.complete.
Item No.5 :- Refilling the trenches with available excavated Stuff with soft material first over pipeline and then hard material in 15 cm layer with all leads and lift including consolidation ,surcharging ,etc.complete
Item No.6 :-Providing and fixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete.
Item No.7:- Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres
Item No.8:- Providing & Fixing MS angle 35x35x5 mm size including Cutting & Fabricarion as Directed by Engg.in charge. 1) 1.8x4= 7.2m 2)1.5x10=15 m 1+2=22.2m
Item No.9:-Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.).
Subwork:- Distribution Sysytem Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M)
Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M)
Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto 0 to 1.5 M)
Item No. 4 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.
Item No. 5 :- Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing material i.e. solvent cement, etc. complete. 63 mm Diam.PVC 4 Kgcm2
Item No. 6 :- Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).63 mm Diam.PVC 4 Kgcm2
Item No. 7 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.
Item No. 8 :-Providing & Supply Bib Taps & Connections….etc complete.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.84 MB
BOQ_2180661.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .