Special repairs to 06 Cook House Bldg No T-58A, T-52A, T-82A, T-91, T-93, T-117 at South Camp of 274 Transit Camp Khanpur under GE (South), Delhi cantt

Amount

Dismantling asbestos cement (corrugated ,semi corrugated etc.) sheets in roof covering complete all as specified and directed.

Dismantling wrought iron or mild of any description not otherwise provided for complete all as specified and directed.

M&L for 6 mm thick asbestos cement corrugated sheets in roofs fixed with J type or cranked hook bolts complete all as specified and directed.

All as Srl item no. 3 here-in-before but except sheets

All as Srl item no. 3 here-in-before but plain angular ridge

Demolition of brick wok built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n. exc 1.5 sqm each complete all as specified and directed.

Taking down and refixing in same opening after any kind of alteration of shutters of any description of exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and as directed .

Demolition of cement concrete of any description and any position not otherwise specifically provided for all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

Taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed .

(a) 15 mm bore

(b) 20 mm bore

S&F Galvanised iron tubes medium grade with all fittings and fixed complete to walls & ceiling or laid in floors complete all as specified & directed of following sizes.

(a) 15 mm bore.

(b) 20 mm bore.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floor etc. ) complete all as specified and directed of following sizes :-

(a) 15 mm bore.

(b) 20 mm bore.

M&L burnt brick work with sub class 'B' old size bricks, class designation 75 Kg/Sq cm, built in cement mortar (1:6) straight or curved on plan exc. 6 m mean radius complete all as specified and directed.

M&L burnt brickwork with sub class 'B' old size bricks, of class designation 75 Kg/Sq cm, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar (1:4.) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed

M&L for rendering 10 mm thick on concrete surface or fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement on walls complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 mixed with integral water proofing compound @3% by wt. of cement on fair faces of brick work or concrete surfaces,, finished even and fair complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral water proofing compound

M&L for preparing new plastered wall surfaces and applying two coats of white wash complete all as specified and directed .

M&L for complete removal and preparing old plastered on internal wall surfaces and applying two coats of white wash complete all as specified and directed .

M&L for preparation of plastered or unplastered new external wall surfaces of walls and applying two coats of cement base paint complete all as specified and directed .

M&L for complete removal and preparation of plastered or unplastered old external wall surfaces of walls and applying two coats of cement base paint complete all as specified and directed .

M&L for screed bed or bedding layer of cement mortar 1:6 and 20 mm thick for laying floor finish complete all as specified and directed .

M&L machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

All as per srl item 27 here-in-before but on vertical surface any height including 10 mm thick backing layer in CM 1:3 in skirting complete all as specified and directed .

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc. 0.06 Sqm but n.exc. 0.11 Sqm in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed .

M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces fixed over & including plaster 10 mm thick in CM 1:4. as in skirting/dados etc. on vertical surfaces complete all as specified and directed .

S&F mild steel framed works as grills gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed blusters walk ways railings framework of water tanks and similar work conforming to Fe 290 Gde E-165 in chowkhats of doors frame i.e. all cutting welding etc. complete all as specified and directed .

S&F for mild steel in wind ties for roof including securing bolts, Angle iron post and struts in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed .

All as per srl item 32 here-in-before but fixing only

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35 mm thick 2nd class HW plain framed, factory made paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed .

S&F 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete all as specified and directed .

M&L for preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface complete all as specified and directed .

All as per srl item 37 here-in-before but one coat of synthetic enamel paint on old surface without primer including preparation of surfaces.

S&F for stainless steel wire netting size of mesh in 12 mm and 1.4 mm dia fixed with tinned tacks of stainless steel wire staples on the top of the roof complete all as specified and directed .

All as per srl item 39 here-in-before but fixing only

S&F for 300 mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed .

S&F for 100 mm size of Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed complete all as specified and directed .

S&F for 100 mm size of MS butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed .

S&F for 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed .

S&F for 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed .

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size all complete all as specified and directed .

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150 mm of size all as specified and directed.

S&F for aluminium, anodised 100 mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all complete all as specified and directed .

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 140 mm complete all as specified and directed .

S&F for mild steel 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed .

All as per srl item 51 here-in-before but without glazing bars

M & L for preparation of new or previously un treated steel and iron surfaces over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces complete all as specified and directed .

All as per srl item 53 here-in-before but one coat of synthetic enamelled paint on old treated surface without primer

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified and directed .

All as per srl item 55 here-in-before but fixed in repairs complete all as specified and directed .

S&F of cast iron casement stay size 300 mm , with hinged joint and two plates with studs complete all as specified and directed .

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement 1:2:4 type B-1 as required complete all as specified and directed .

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed .

Hacking out old broken glass (any thickness, size quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed .

M&L for providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in roof kerbs, mud stops, filling in frames and the like rounded or chamfered on edges complete all as specified and directed .

M&L for 2nd Class Hard Wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed .

S&F in repairs 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame works including teak wood beading 20 mm thick as in shutters of cupboards, shelves, etc. complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) in 40 mm complete all as specified and directed .

S&F aluminium, anodised 100 mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F aluminium, anodised 100 mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all complete all as specified and directed .

S&F in repairs bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15 mm bore complete all as specified and directed .

S&F in repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed .

M&L for 75 mm thick cement concrete type C2 1:3:6 using 40 mm graded aggregate as plinth protection finished even and smooth without using extra cement complete all as specified and directed ..

S&F plain aluminium sheeting 0.56 mm thick, alloy 31000H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed .

M&L for RCC 1:2:4 nominal mix type B0 (using 12.5 mm graded stone aggregate) for chhajja/shelves and similar articles complete all as specified and directed .

M&L for TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending, hooping and binding with and including mild steel wire not less than (0.9 mm) dia complete all as specified and directed .

M& L for use & waste of formwork, rough finished surfaces of concrete for sides and soffits of arches complete all as specified and directed .

Excavation in trenches n.exc 1.5 m wide & n exc 1,.5 m in depth for foundation etc. in hard/dense soil complete all as specified and directed .

Surface excavation in soft/loose soil n. exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed .

M&L for hard core of gauge of n exc 63 mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to a true surface complete all as specified and directed .

M&L for 75 mm thick cement concrete type D2 (1:4:8)(using 40 mm graded stone aggregate) as in floors complete all as specified and directed .

M&L for 75 mm thick cement concrete type B2 (1:2:4)(using 40 mm graded stone aggregate) as in floors complete all as specified and directed .

Taking down shutters of any description exc. 1 Sqm and n.exc 2 Sqm each and removing to store.

Taking down carefully the old u/s Aluminium/ Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, holders, pendants, sockets, regulators, etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish all as specified and directed.

M&L for point wiring complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including new concealed PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enamelled black paint with top cover 3 mm thick plastic/laminated sheet (ISI Marked) of required colour with screwed and cup washer with all accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified for following :- Note:- the rate is inclusive of cutting/chasing and making good the disturbed surface with CM 1:3 and the same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete.

(a) One light /fan point controlled by one way switch

(b) One 3 pin socket outlet 5 amps independent board

(c) One 3 pin socket outlet 5 Amps point on same board

(d) One 3 pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 2.5 Sqmm as earth wire as power point complete all as specified & directed..

(e) One 3 pin socket outlet, 15 Amps on independent board with cable 4.0 Sqmm for main current and 4.0 sqmm as earth wire as power point complete all as specified & directed..

S&F switch piano, flush type 5 Amps single pole one way, ISI marked complete all as specified & directed.

S&F socket piano, flush type 5 Amps single pole one way, ISI marked complete all as specified & directed.

S&F switch piano, flush type 15 Amps single pole one way, ISI marked complete all as specified & directed.

S&F socket , flush type 15 Amps single pole one way, ISI marked complete all as specified & directed.

S&F in replacement of single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pone MCB of 20 Amps complete all as specified & directed.

S&F ceiling rose surface Bakelite 60x 25 mm two to three terminals, ISI marked complete all as specified & directed.

S&F fan regulator electronic socket type complete all as specified & directed.

S & F LED Integrated Batten T5, 20 Watt, 4 Ft White, indoor decorative aluminium extruded T5 LED batten -integrated type complete with including flexible wire complete all as specified & directed.

S & F LED Integrated Batten T5 LED tube light fitting of 10 Watt - 2' white, indoor decorative aluminium extruded T5 LED batten integrated type complete with including flexible wire complete all as specified & directed.

S&F RUGBY Bulkhead suitable for LED 09 Watt of Base B22, Bulk head in die cast aluminium housing & frosted glass including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified & directed.

S&F Batten holder with PVC body and back plate suitable for LED Bulb B-22 cap complete all as specified & directed.

S & F LED RETROFIT Lamp of 9 watt for fixing in batten holder/wall mounting/bulkhead point complete all as specified & directed.

S&F LED Building security light fitting 30 W highly efficient LED street light with lens made of pressure die cast aluminium housing & enclosed with toughened glass of IP -66 with new bracket and GI Pole as per site requirement any type complete all as specified & directed.

Taking down of Old serviceable/unserviceable ceiling fan and deposited to MES Store yard complete all as specified and directed .

S & F Ceiling Fan 1200 mm sweep (48" inch) copper wounded complete with including flexible wire all as specified and directed .

Taking down of old serviceable/unserviceable exhaust fan dismantling of blades, greasing , oiling and cleaning of blades of serviceable exhaust fan carrying out rewinding, reinstallation and testing complete all as specified and directed . Note : Rewinding will be measured and paid under respective item of this Schedule.

M&L for Rewinding of Exhaust fan 450 mm sweep by dismantling of exhaust fan motor cutting and removing of burnt windings, cleaning, winding with super enamelled copper wire of superior quality, same gauge of wire, same Nos of turns including provision of insulation paper applying of varnish drying of varnish and assembling of exhaust fan and transportation to and from work shop complete all as specified and directed .

Supply & Fixing in replacement sheet metal enclosure DB's 12 way , 240 volts, double door bus bar neutral link, earth bar and din rail complete all as specified and directed.

Supply & Fixing MCB SPN 32/40 Amps 240 volts complete all as specified and directed .

Supply & Fixing MCB SP 6 to 40 Amps 240 volts complete all as specified and directed .

M&L in replacement of earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI earth lead wire 4.0 mm as earthing leads by means of bolts, nuts, check nuts and washers all joints as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1 chamber and MS angle iron frame of 40mmx40mm x3 mm and RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and connected to earth test point including testing complete all as specified and directed .

Taking down of old unserviceable Light Fittings /tube light fitting any type complete all as specified and directed .

Taking down of old unserviceable MCB DB's any type complete all as specified and directed .

Taking down of old unserviceable MCB SP/SPN any type complete all as specified and directed .

M & L for laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm x 2 core all as specified and directed .

Excavation in trenches in any type of soil n. exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, Foundation of poles or stays complete all as specified and directed ..

Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed .

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying complete all as specified and directed .

Supply and laying sub class ‘B’ bricks well burnt for cable protections laid flat with length equal to width of brick over cable perpendicular to length of cable complete all as specified and directed .

Supply, laying and testing galvanised steel tube (GI) light grade of size 40 mm bore with screwed socket joints together with all fittings such as bends, elbows, tees, short pieces connectors, caps, plugs and unions etc. and fixed complete to walls or laid in trenches all as specified and directed .

MAHABIR SINGH

The new hut furnitures