Civil Work

Repair and Renovation of Sos Toilet and Bathroom

Half Brick massory with common burnt clay F.P.S (non modular ) bricks of class desingation 7.5 in superstructure above plinth level up to floor V level. Cement mortar1:4 (1Cement:4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) , of approved make, in all colours, shades except burgundy, botle green, black of any size as apprvoed by Engineer-in-charge in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3(1cement:3 coarse sand) and joining wih grey cement slurry @3.3 kgs per sqm, including pointing in white cement mised with pigment of matching shade complete

Providing and fixing ISI marked flush door shutters conforming to IS:2202(Part 1) decorative types, core of block board construction with frame of 1st class hard wood and well- macthed teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. with 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory-made panel PVC door shutter consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm for styles and 15x15mm for top & bottom rails. M.S frmae shall have a coat of steel primers of approved make and manufacture. M.S frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flate and 20 mm shall be tupaered in 45 degree angel on both side froming styles and 5 mm thick, 95mm wide PVC sheet out of which 75 mm shall be flate and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top botoom and lock rails shall be provided both side of the panel. 10 mm (5mmx2) thick,20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5mm+2mm) thickx15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters

Steel work in built up tobular(round, square or rectangular hollow tubes etc) trusses eetc., including cutting, hoisting, fixing in poition and appliying a priming coat of approved steel primer, incuding welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement" 4 Coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the hoints with white cement and matching pigments etc., complete

Providing and laying Vitrified tiles in floor in different sizes (thichness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, lai on 20 mm thick cement mortar1:4(1cement:4 coarse sand) jointing with greay cement slurry @3.3 kg/sqm including grouting the oints with white cement and matching pigments etc. The tiles must be cut with the zero chippin dimaond cutter only. Laing of tiles will bedone with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. Galzed Vitrified tiles Matt/Antiskid finish with tiles size 600x600 mm

Providing and fixing, precoated gaivanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thckness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thckness of 0.05 mm) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the steel and ployester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to aboid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and inclding cutting to size and shape wherever required.

12 mm cement plaster of mis 1:6(1 cement:6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement:6 fine sand)

Distempering with 1st quality acrylic distemper(ready mixer) having VOC content less than 50 gram/liter, of apprvoed manufacturer and of required shade and colour all complete to achieve even shade and colour. New work(two or more coats) over and including water thinable priming coat with cement primer having VOC content less than 50 gram/ litre.

Fininshing Walls with Acrylic Smooth exterior paint of required shade. New work(Two or mor coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @0.90 ltrs/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the palstered wall surface to prepare the surface even and smooth complete.

Providing & fixing white viterous china water closet squatting pan(indian type) along with "S" or P trap including dismantling of old wc seat and "s" or "p" trap at site complete with all operations including allnecessary materials,labour and disposal of dismantled maerial including malba, all complete as per the drection of Enginner-in-charge. Orssa pattern W.C pan of size 580x400 mm

Dismantling doors, windows and clerestory windows (steel of wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area 3 sq meters and below

Dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thichness of tiles 10 mm to 25 mm

Dismantling roofing including ridges, hips, valleys and gutters etc, and stacking the material within 50 meters led of G.S. Sheet

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the duping ground within 50meters lead.

Providing and fixing of wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixere of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a)Whiter Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing P.V.C low level flushing cistern with manually controlled device(handle lever) conforming to IS:7231, with all fittings and fixtures complete.10 letrs capacity- White

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete Semi rigid pipe 40 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixin 3 layer PP-R(poly propylene random copolymer) pipes confirming to IS:15801, UV stabilized & anti- microbial fusion welded, having thermal stability for fot & cold water supply, including all PP-R plain & brass threaded polypropylene random fitting and fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of hoints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. PN-16 Pipe, 25 mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R(poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. Extenral work. PN-16 Pipe, 25 mm OD (SDR-7.4)

Providing and fixing PPR Unions PPR Union 25 mm

Providing nad fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete. 25 mm nominal bore

Providing and fixing C.P. brass bib cock of apprvoed quality conforming to IS:8931 15mm nominal bore.

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providingand fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.15mm nominal bore

Providing and fixing PTMT grating of approved quality and colour circular type. 100 mm nominal dia..

125 mm nominal dia with 25 mm wase hole.

Providing and fixing PTMT soap Dish holder having length of 138 mm, breadth 102 mm height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length.

Labour Charge