Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L1 | Accepted-AOC Being Lowest Tender | |
| 2 | L2₹24.6 L+₹3.6 L (17.3%)Rejected-Finance NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹25.5 L+₹4.5 L (21.7%)Rejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹25.7 L+₹4.8 L (22.8%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹30.5 L+₹9.6 L (45.8%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹45.0 L
EMD Value
₹89,900
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
PETTY REPAIR TO B/R NATURE OF WORKS ETC AT MD ACCN BANA SINGH ENCLAVE, 180 ORs MAHIPALPUR, 35 INF BDE, 18 GRENADIERS, 18 MADRAS UNIT UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10
2023_MES_634924_1
GE/DS-86/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹89,900
Yes
28 Feb 2024
29 Dec 2023
29 Jan 2024
29 Dec 2023
27 Jan 2024
13 Jan 2024
Amount
Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/ jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. including replacement of major defective item if required, complete all as specified and as directed.
Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate Nos. of tradesmen (Min 01 Plumber with helper) with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-II at Bana Singh Complaint Cell. 3. A recovery of Rs.100/- per complaint shall be recovered from the contractor for non-attending the complaint within 4 hrs and there after Rs.200/complaint. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by concern executive. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and may be asked for the verification at the time of payment of each RAR/Bill.
Attending complaint for petty repair to easing of Doors/ Window/ Cup Board shutters by tightening of hinges/ handles/ Al-drop bolt/ tower bolt/ knobs, hasp and stapple etc of any size/ any number of panels for easy closing/ opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required complete all as specified and as directed.
Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one to make the system functional shall be measured and paid for seperately as "S&F or S&F in repairs" under respective applicable item of this schedule. 2. Contractor shall provide adequate Nos. of tradesmen (Min 01 Carpenter with helper) with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-II at Bana Singh Complaint Cell. 3. A recovery of Rs.100/- per complaint shall be recovered from the contractor for non-attending the complaint within 4 hrs and there after Rs.200/complaint. 4. The contractor will ensure that the team of carpenter with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by concern executive. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and may be asked for the verification at the time of payment of each RAR/Bill.
Attending complaint for day to day petty repair like repair to floors, plasterwork, cement concrete work etc in patches (each patch not exc 3.00 Sqm) including dismantling/demolition wherever required by deploying adequate numbers of tradesmen (i.e. mason with helper) complete all as specified and as directed. (The material required for patch work shall be measured and paid seperately under the respective item of this schedule as specified "Material only")
Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one to make the system functional shall be measured and paid for seperately as "M&L or S&F in repairs" under respective applicable item of this schedule. 2. Contractor shall provide adequate Nos. of tradesmen (Min 01 Mason with 01 helper) with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-II at Bana Singh Complaint Cell. 3. A recovery of Rs.100/- per complaint shall be recovered from the contractor for non-attending the complaint within 4 hrs and there after Rs.200/complaint. 4. The contractor will ensure that the team of carpenter with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by concern executive. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and may be asked for the verification at the time of payment of each RAR/Bill.
Attending complaint for petty repair to blockage of floor/Nahani trap,opening of toilet blockage, Manhole cleaning, sewage line cleaning including complete removal of grass/roots inside lines replacement of major defective item if required complete all as specified and as directed.
Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one to make the system functional shall be measured and paid for seperately as "M&L or S&F in repairs" under respective applicable item of this schedule. 2. Contractor shall provide adequate Nos. of Safaiwala with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-II at Bana Singh Complaint Cell. 3. A recovery of Rs.100/- per complaint shall be recovered from the contractor for non-attending the complaint within 4 hrs and there after Rs.200/complaint. 4. The contractor will ensure that the team of carpenter with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by concern executive. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and may be asked for the verification at the time of payment of each RAR/Bill.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and as directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate 25mm thick as in sub floor including use of necessary form work etc. complete all as specified and as directed.
M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
All as per Srl item No.7 above, but in skirtings laid over and including 10mm thick backing coat of plaster in CM 1:4.
M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (square or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for joint free coloured glazed ceramic tiles in vertical surfaces 300x200x7mm/450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick cement rendering in cement mortar 1:4 complete all as specified and as directed.
M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and as directed.
All as per Srl item No.11 above, but in skirtings laid over 10mm thick backing coat of plaster in CM 1:4.
Demolition of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.
M&L for 16 to 18 mm thick granite slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
Rounding to edges of granite stone slabs on edge, such as in steps and other similar situations complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) including removal of debrish out of MoD Land complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base, to be finished even and fair complete including use of necessary form work complete all as specified and as directed.
S&F for machine pressed precast concrete interlocking paver block any shape and size,with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade, laid over and including 50mm thick sand cushioning complete all as specified and as directed.
M&L for pre-cast cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in kerb stone (factory made) on road and path etc complete all as specified and as directed.
M&L for cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in copings, window cills, kerb stone for foot path and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM 1:4 complete joints to match complete all as specified and as directed.
M&L for preparation of new or previously untreated plastered or concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paintover a coat of primer complete all as specified and as directed.
Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half brick thick walls built cement mortor 1:4 complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.
M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings, to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistent primer complete all as specified and as directed.
M&L for preparation of surfaces plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade complete all as specified and as directed.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
All as per Srl item No.34 above, but exceeding 1.50 sqm and not exc. 4.00 sqm each complete all as specified and as directed.
Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each complete all as specified and as directed.
S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.
S&F factory made moulded solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2010) complete all as specified and as directed.
S&F factory made moulded solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rai, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at the site as per specification & drawing . on page no 161 of SSR part-II (2010), complete all as specified and as directed.
S&F 35 mm thick Factory made IInd class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and as directed. Notes for Srl item Nos.38 to 41 :- a) The contrator shall submit purchase voucher of factory made shutter alongwith manufacturer test certificate while claiming RAR. b) The nos. and size of shutter shall be given in writing as per site requirment by Engr-in-Charge with intimation to this office for procurment of shutter from manufacturer.
S&F stainless steel butt hinges, size 100 mm complete complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts, 150 mm long of extruded section and fixed complete all as specified and as directed.
S&F aluminium handles, 150 mm size, fabricated type complete all as specified and as directed.
S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section and fixed complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.
S&F in repairs for aluminium sliding door bolt, 200 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F in repairs MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed
S&F in repairs MS butt hinges 75mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc. complete all as specified and as directed.
S&F in repairs extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.
S&F in repairs extruded aluminium alloy handles, fabricated type, anodised, 100 mm size complete all as specified and as directed.
S&F in repairs aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.
S&F in repairs aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.
S&F in repairs for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.
Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc. complete all as specified and as directed.
S&F for 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and as directed.
S&F in repairs door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No.3 complete all as specified and as directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165 complete all as specified and as directed.
Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning serviceable pipe and balance to be dispossed off from the premises complete all as specified and as directed.
Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning serviceable pipe for refixing and balance to be dispossed off from the premises complete all as specified and as directed.
M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc. complete all as specified and as directed.
M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc. complete all as specified and as directed.
Re-fixing old steel tubing, bore of pipe in 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
Re-fixing old steel tubing, bore of pipe in 15mm and connections including connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.
Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to contractor's store complete all as specified and as directed.
S&F for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.
Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to contractors store complete all as specified and as directed.
S&F for 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.
S&F for ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for ball brass valves, 15 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for bib taps, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs for pillar cock 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure complete all as specified and as directed.
S&F in repairs brass chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs for bib taps, 15mm bore, minimum weight 90 gms, standard of PTMT any colour, high pressure screwed for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs for stop valves, 15mm bore, minimum weight 90 gms, standard of PTMT any colour, high pressure screwed for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs, mixing valve 15 mm dia,Hot & cold CP mixture brass fancy type including joints to steel pipe or unions for centre hole wash hand basin , including fittings complete all as specified and as directed.
S&F in repairs tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and as directed.
S&F in repairs Waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F in repairs waste pipe 32/40 For WHB and sink complete all as specified and as directed. .
Taking down CI, AC, PVC pipes of 100/110mm dia of any description including complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.
S&F PVC (SWR) bends/tee of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.
M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed.
S&F in repairs, salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover complete all as specified and as directed.
S&F in repairs vitreous china squatting pan white oriisa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P-trap including cement concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and as directed.
S&F in repairs vitreous china ware wash down Water Closet (Pedestal) white, including white PVC seat and cover, closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper complete all as specified and as directed.
S&F in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white,with inlet, including brackets complete all as specified and as directed.
S&F in repairs Vitreous china urinal flat back, size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
S&F in repairs health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore complete all as specified and as directed.
S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F in repairs for vitreous china ware Wash Hand Basin, white, flat back of size 550 x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length with all fittings etc. complete all as specified and as directed.
S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and as directed.
S&F in repairs prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelment boxes etc. complete all as specified and as directed.
S&F in repairs for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/screws or galvanised wire staples complete complete all as specified and as directed.
S&F in repairs drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc. complete all as specified and as directed.
Disconnectiong existing tanks of capacity exc 250 & not exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc. complete all as specified and as directed.
All as Srl item No.105 above, but capacity of tank exc 500 & not exc 1000 Ltrs.
All as Srl item No.105 above, but capacity of tank exc 1000 & not exc 2000 Ltrs.
Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.108 above, but 100 mm bore of pipe.
All as per Srl item No.108 above, but 75 mm bore of pipe.
S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.109 above, but 100 mm bore of pipe.
All as per Srl item No.109 above, but 75 mm bore of pipe.
S&F in repairs cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.110 above, but 100 mm bore of pipe.
All as per Srl item No.110 above, but 75 mm bore of pipe.
S&F in repairs cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.111 above, but 100 mm bore of pipe.
All as per Srl item No.111 above, but 75 mm bore of pipe.
S&F in repairs CI bends / branch pieces (any radius) for oval access doors complete all as specified and as directed for the following :-
All as per Srl item No.112 above, but 100 mm bore of pipe.
All as per Srl item No.112 above, but 75 mm bore of pipe.
M&L in repairs CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and as directed.
Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.114 above, but 100 mm bore of pipe.
All as per Srl item No.114 above, but 75 mm bore of pipe.
S&F in repairs, MS clamps for CI pipes 100 mm bore made out of 50mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified and as directed.
"Material" only for rendering 15mm thick in CM 1:6 to wall/concrette surfaces in patches not exc 3 Sqm each including finished even smooth without using extra cement including taking down of existing water etc complete all as specified and as directed. Note : Finishes shall be measured and paid under respective item of this schedule.
Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender
Chaudhary Constructions
A N BUILDERS
SABHARWAL CONSTRUCTION CO.
Jai Ambay traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .