Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | L1 | Accepted-AOC Acceptance of Work | |
| 2 | L2₹34.8 L+₹3.4 L (10.9%)Rejected-Finance 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹35.8 L+₹4.4 L (14.1%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹39.9 L+₹8.5 L (27.0%)Rejected-Finance 6 C SHEKHAWAT COLONY SIRSI ROAD MEENAWALA JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | 302012 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
PROVN OF CERTAIN SANCTIONED WORKS AT AF STN BARNALA UNDER GE (AF) HALWARA
2022_MES_571991_1
GE/HAL-61/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Halwara
MES ENLISTED CONTRACTORS CLASS D CATEGORY a(i) and b(i)
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Halwara
₹83,000
Yes
18 Feb 2023
29 Dec 2022
30 Jan 2023
29 Dec 2022
28 Jan 2023
13 Jan 2023
Amount
Demolition of concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of cement conrcete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc.complete all as specified and directed.
Taking down cement plaster on brick walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Taking down of chowkhat or frames with shutters (without taking off shutter from frames) n.exc 1.5 Sqm each complete all as specified and directed.
All as per Sl item No 5 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down or up steel tubing 15mm bore and connections inculding cleaning for refixing or removal to store completge all as specified and directed.
All as per Sl item No 8 above but 20mm bore
Dismantling brick tiles or terracing tiles, single layer on roof complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6M mean radius and built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 2% of cement, finished fair and even without using extra cement complete all as specified and directed.
M&L for 5mm thick cement plastering in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified.
M&L for 25mm thick cement concrete 1:2:4 type B-0 (using12.5mm graded aggregate) as in sub base of floor finishes complete all as specified and directed.
M&L for PCC 1:3:6, type C-1, (using 20mm graded stone aggregate) as in cills, steps and other similar bands , plinth courses ,parapets , filling of mass concrete for staging of water tanks, copings, bed block of hold fast/bed plates etc complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-2 [using 40 mm graded stone aggregates] as in sub base complete all as specified and directed.
M&L for hard core of broken bricks of gauge exe 63 mm deposited spread and leveled in layers not exe 15cm thick watered and rammed to a true surface.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone agg) as in surface channels of drains (duct ) complete all as as specified and directed.
M&L for vitrified ceramic dark shed tiles 8-10 mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed.
All as per Sl item No 21 above but as in skirting over and including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed. .
M&L for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per Sl item No 24 above but as in skirtings over and including 10mm thick rendering in CM 1:4
M&L for glazed ceramic coloured tiles in vertical surface 300x200x7mm or 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protections/ path finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed. Note : (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3.00 mtr length. (ii) 30mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.
M&L for 20-25mm thick machine cut kota stone slab flooring over and including 20mm thick cement screed base of cement mortar 1:6 laid and jointed with grey cement slury mixed with pigment to match the shad of slab including grinding and polishing complete all as specified and directed.
All as per Sl item No 28 above but as in skirting /dado over and inlcuding 10 mm thick rendering in CM 1:4 complete all as specified.
S&F anodised aluminium powder coating frame for doors, windows , ventilators, partiiton including joining cleat for fixing etc (Thickness of powder coating not less than 0.50 micron) complete all as specified and directed.
S&F anodised aluminium powder coating door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc (Thickness of powder coating not less than 0.50 micron) complete all as specified and directed.
S&F aluminium powder coated sliding window two track and ventilator with top hung shutters without sash bars section weight 0.55 kg/m, necessary jointing cleat glazing, clip, handles, CP hinges, tower bolts etc packing, anodised snap beading, screws etc (Minimum Thickness of powder coating not less than 0.50 micron) complete all as specified and directed.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed.
S&F 9mm thick prelaminated particle board with decorative choice lamination on both sides, type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed
S&F 12mm thick both side prelaminated particle board with decorative choice lamination type 1, of surface finish, colour and pattern for working cubicles and similar works. fixed with aluminium framework/ approved adhesive as per maker's instructions complete all as specified and directed.
S&F Brass drawer pulls .3 screws plate with fixed dished pull ,80mm to 100mm long all as specified and directed.
S&F Brass Hat pegs ,solid body ,125mm to 175mm
S&F continuous (paino ) hinges mild steel ,bright finish or electro galvanised width of flaps 30mm (when open ) all as specified and directed.
S&F 6mm thick external teak wood lipping fixed to 18/19mm thick block board or veneered partical board fixed with nails complete all as specified and directed.
S&F extruded brass handles of 125mm size ,fabricated type polished complete all as specified and directed.
S & F stainless steel runners (sliding type) for moving of cupboard/drawers etc smoothly function of open and close of drawers Horizantal type complete all as specified and directed by Engr- in -charge
S&F in repair curtain rod made out of 20mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm complete all as specified and directed.
S&F aluminium mortice lock 65mm 4 lever vertical type complete all as specified nd directed.
S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-0 complete all as specified and directed.
S&F factory made Plain, framed, panelled shutters, 35mm thick, 2nd class hard wood , plain, framed, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
Supply and fixing for 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a); supplied and fixed to chowkats complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately
S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet , edges will be painted to match the printed sheet reinforced with MS square tube in opening as per specification and drawing.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain printed colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F cold rolled mild steel medium weight butt hinges 100mm size complete all as specified and directed.
S&F MS plates (plain or chequered ) channels ,square cut or notched (ordinary of counter sunk ) froming holes , without any attachment Fe-410grade E-250 ) complete all as specified and directed.
S& F rolled section steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) within 20mm of the length indicated complete all as specified and directed.
S&F 32mm dia GI light grade pipe 450mm long as in spouts, pipe beveled cut at both ends and fixed making hole in parapet wall of roof, sunshade, chajjas etc above the R C C slab and ceiling, finished the hole with cement plaster 1:3 to match with existing adjacent surfaces complete all as specified and directed.
S&F 15mm bore GI pipes "Medium grade" with all fitting and fixed complete to walls and ceiling etc or laid in floors complete all as specified and directed.
All as per Sl item No 55 above but 20mm bore
S&F stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in.
S&F Health faucet (ABS body) mild steel chromimum plated suitable for 15mm dia pipe with 1.2 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.
S&F in replacement rotational moulded water storage tank (cylinderical vertical with closed top ) 750 ltrs capacity, hoisted and fixed in position with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms) including taking down existing tank complete all as specified and directed.
S&F vitreous white chinaware wash hand basin 550x400 mm size including CI/MS brackets ,45cm long PVC connection. PVC waste pipe , waste coupling of suitable size/length, 15 mm dia CP pillar tap, 15mm bore CP Angle cock and all connection complete all as specified and directed..
S&F china ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass jet faucet suitable for EWC with PVC chord and brass nozzle and fixed to pipe complete all as specified and directed.
S&F syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32mm flush pipe etc, complete all as specified.
S&F PVC connection 45 cm long with two nuts and washers at both ends complete all as specified.
S&F grating round 100mm size of PTMT (minimum wt 25 gms)
S&F chromium plated shower rose & arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore complete all as specified and directed.
S&F 15mm bore bib taps long body, CP cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F 15mm bore stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank complete all as specified and directed.
S&F 15mm bore stop valves (Concealed type) , chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe complete all as specified and directed..
S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F Aluminium anodised Cast type handle of 150mm size complete all as specified and directed..
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass any size, thickness from wooden or steel frames complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqmin each pan complete all as specified and directed.
S&F small fitting of 1st class hard wood any shape not exceeding 200cum, as for door stopper, cleat etc.
M&L for prepration of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of primer or red oxide on new steel surface of girth over 10 cm, complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface of girth over 10 cm,complete all as specified and directed.
S&F mild steel screw bolts ( machine made) with hexagonal heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut exc 22.50 and dia of shank 16 mm complete all as specified and directed.
Taking down existing metal safe and refixing at other location in same room including all connecting works and making good existing surface complete all as specified and directed by Enge-in-charge.
S&F anodised aluminium snap grid of size 605 x 605 mm for false ceiling, hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof suraface by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified
S&F 8mm mm thick calcium silicate board of silicious and calcerous material reinforced with cellulose fibre for fixing in snap grid work as per manufacturers instructionscomplete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer and JK Birla wall care putty complete all as specified and directed..
M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over one coat of primer and JK Birla wall care putty complete all as specified and directed.
M&L for preparation of new plastered suraces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for complete removal of existing treatment on wall surfaces and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling surfaces and applying three coat of white wash complete all as specified and as directed.
M&L for complete removal of existing treatment on walls and applying two coat white wash complete all as specified and as directed.
M&L for preparation of old steel surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparing old plastered surface of wall and applying one coats of distemper oil emulsion over a coat of wall putty complete all as specified & directed by Engineer-in- charge
M&L for preparation old plastered surfaces of wall and applying one coat of cement base paint over a coats of priming plastered surfaces complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and directed.
M&L for 60mm thick rubber moulded interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand complete all as specified and directed..
M&L for sand filling in cushioning to interlocking paver blocks/filling under floors complete all as specified and directed.
Roughening surfaces of old/concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed
M&L for 40mm thick (Average thickness) PCC 1:2:4 type B1(using 20mm graded stone aggregate) as in padding over roofs finished even and smooth using extra cement complete all as specified.
M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) in roof kerbs complete all as specified and directed.
M&L for 15 mm thick screed bed over RCC roofs in cement mortar 1:4 mixed with water proofing compound by 3% by weight of cement or as per manufacturers instructions complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately.
Supply only Integral waterproofing compound
Preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced having sun Reflectivity index (SR) of 106 on top of concrete roof surfaces, all cracks upto 3mm at corner joints channel and parapets should be treated with crack seal , Applying three coats including one coat of primer of Shali urethene BTD/Sikalastic 560/smart care damp proof ultra having coverage @ min 0.75Kg/m2 and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/smart bcare damp proof ultra @ total consumption 2Kg/m2 in two coats for maintaining minimum dry film thickness 1.50mm and elongation at break of free film of approx 350% The material shall be applied with brush or rooller complete in all respect as per the direction of Engineer -in-Charge /Consultant (Note : 6hrs interval between two coat will be maintain ) All auxillary and accessories involved during application should be supplied by single manufacturer as part of system . Make STP/Sikka/Asian paint or equivalent as approved by GE. i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years . However contractor may deposit the FDR of same amount in favour of GE . If contractor fail to rectify the defect pointed out during this period in writing , the defect shall be got rectified at contractor " risk and cost and the payment shall be made from the amount of kept reserved or by encashing the FDR deposited by the contractor as guarantee. the contractor's quoted rates for this item shall deemed to be inclussive of this aspect.
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position fixed to walls with clamps complete all as specified and directed.
S&F PVC (SWR) bends 110 mm dia co,mplete all as specified and directed.
S&F 25mm thickness of insulated PVC wall linning consisting of PVC insulated panels having expanded polystyrene (EPS) stuck 2mm thick wood grain printed PVC sheet instead of plain colour sheet duly fitted into the wall as per specification complete all as specified and directed
S&F 5mm thick PVC Sheet fillet of width 35mm for wall panelling inclussive of fixing on to wall to make PVC frame complete all as specified and directed.
M & L for concealed conduit point wiring complete for light with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.
All as per Sl item No 111 above but fan point controlled by one way switch
All as per Sl item No 111 above but one 3 pin 6 Amp socket outlet on same board
All as per Sl item No 111 above but one 3 pin 6 Amp socket outlet on independent board
M&L for point wiring complete with 2.5 Sq mm single core PVC insulated but unsheathed multistrand copper conductor FRLS cabel 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8 mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured modular cover plate including 2.5 Sq mm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board as specified.
M&L for flame proof point wiring complete using colour code with two runs of 2.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade conforming to IS-694 drawn through and including ERW steel conduit 25 mm dia (external) flame proof, heavy grade (IS Marked) including necessary all accessories / fixtures concealed in wall, ceiling including sunken type pressed steel terminal boxes with flame retardant sheet of approved shade 3 mm thick including providing continuous earth wire with one single run of 2.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 1100 volts grade conforming to IS-694 complete all as specified and as directed by Engr-in-Charge.
M&L for module switch 1 way 6 A, 1 module complete all as specified & directed.
M&L for module switch 1 way 16 A, 1 module complete all as specified & directed.
M&L for modular socket, 6 Amps, 2/3 pin combined 2 module complete all as specified
M&L for modular socket, 6/16 Amps, 2/3 pin combined 2 module complete all as specified
S&F switch piano flush button SP one way 5 Amp
S&F electronic resistance step speed regulator, suitable for 1200 mm sweep ceiling fan up to 300 watt all as specified.
S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body
S&F flame proof rotary type switch with termination box in LM6,16A,Single pole 250V. complete all as specified and directed.
S & F sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP&N 4 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed
S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of four poles 63 Amp with suitable size of DB box (double cover ) complete with connection testing and commissioning
S&F MCB ‘C’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S&F MCB ‘C’ series type suitable for 240 volts, AC supply 20 Amps, S P with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
Material & labour for Sub main wiring with two runs of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable,fire retardant low smoke drawn through and including ERW steel conduit 25 mm dia (external) flame proof, heavy grade (IS Marked) including necessary all accessories / fixtures concealed in wall, ceiling including sunken type pressed steel terminal boxes with flame retardant sheet of approved shade and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling complete all as specified and as directed.
Material & labour for Sub main wiring with two runs of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable,fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 20 mm dia (external) but shall be increased as per actual site requirement in accordance,with wall thickness not less than 1.8 mm complete with all necessary fitting and including with conduit accessories and one run of 4Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling complete all as specified and as directed.
Supply and fixing of single pole and neutral & earth, sheet metal enlclosure with socket for AC connection with MCB 20 A single phase and neutral , 230 V all as specified and directed.
S&F copper strip 20X3 mm complete with saddles and base insulators ( made out of porcelan/rubber) and fixing with screw for roof conductors and down conductors above ground complete as repairs all as specified and directed.
S&F Test point terminal block made of gun metal or phosphorus brnoze of size 75X75X25mm drilled and screwed including 3 Nos, 8 mm dia 25mmlong hex head screw complete all as directed.
M&L for Air termination single pointed copper rod 12 mm dia and 1 Mtr long with 5 spikes each is 150 mm long roof mounted as lightning arrester inslatting commissioning, testing complete all as specified and directed.
Supply and installation of High Efficiency Air purifier and dehumidifier with activated carbon filter and auto dehumdification PM 2.5 indicator,automatic operation mode,portable type complete all as specified and directed
Supply and fixing of Hygrometer Thermometer Humidity Meter With Clock LCD Display complete all as specified and directed.
S&F BLDC type ceiling fans 1200 mm sweep,230V,pearl Ivory colour complete with blades, down rod, electronic remote control regulator,Shackle,canopy,Screw and nuts and all other standerd accessories, Min air delivery of ceiling fan 210 CFM with service value 6.00 BEE. Five star rated with brushless and double ball bearing, direct current motor (BLDC) incluing provision of Anchor nut bolt fastenr type hook fix on existing roof complete all as specified and directed. Note :- (i) Remote control fan regulator shall be fixed with wall on proper stand alongwith pencile dryes batterys.
S&F exhaust fan 300mm, 230 V steel body, 5 star rating single phase with connected accessories as blade frame and louvers.
Provision of Holes for fixing exhaust fans 300mm including plaster work and matching with adjacent surfaces including grouting of Nuts bots etc complete all as specified and direceted by Engr in Charge
S&F swing type wall mounting fan 400mm sweep, 5 star rating complete with nuts bolts clamps etc all as specified and direceted by engineer in charge.Make Orient/Havells/Usha
S & F sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated VTP & N 4 ways, 440 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCCB and isolators etc including fixing in Wall with Cement mortar complete all as specified and directed by Engineer - in - Charge
S&F MCCB TPN 63 Amps with breaking capcity 25kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge
S & F MCB ‘B’ series type suitable for 240 volts, AC supply 6 to 32 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
Supply and fix modular switch blanking plate complete all as specified and directed.
S& F in replacement of existing light fitting with LED batten integrated channel 18 watt having input voltage AC90-300V, 50 Hz , 6500K ,extruded aluminum body with white acrylic cover tube light fitting wall mounted complete with rod, driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge
Supply and fix Recess mounting LED luminaire White powder coated CRCA housing with LEDs 36 watt ,600mmX600mm size, Seamless front frame with flat white high transmission acrylic cover and fixed electronic driver (surge protecter) complete all as specified and directed .
S&F building security light fitting with LED TYPE 35 watt optic lenses with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32 mm bore “light grade” brackets 1.5 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge
Supply, installation, testing and comissioning of hi wall Split Type units indoor/outdoor capacity 2 TR complete with remote control unit and in built air ioniser and plasma filter for better indoor air quality 3 Star Split Dual Inverter Super Convertible 6-in-1 Cooling HD Filter with Anti-Virus Protection AC - White marking MES with black synthetic enamelled paint on both indoor and out door units & including 4 sqmm 3 core flex cable connection from indoor to outdoor unit as per site requirement and refrigerant line copper tubing of suitable sizes including foam insulation upto 5m long, 2Nos powder coated angle iron bracket, nuts, bolts etc for AC outdoor unit including making holes of required dia on walls and necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified and directed by Engr-in-Charge.Make:- Voltas/LG/Daikin
Supply, Installing, commissioning and testing complete, high wall split units of 2 Ton capacity with cooling and heating function alongwith suitable mounting arrangement both indoor and out door unit including connection of refrigerant tube, insulation of refrigerant tube with suitable material as specified, drain out pipe with extension by PVC pipe as required length including making good disturbed surface of wall for indoor/out door complete with cordless remote control complete all as specified and as directed. Make: LG/ Voltas/ Hitachi
Supply, Installing, commissioning and testing complete, high wall split units of 2 Ton capacity with suitable mounting arrangement both indoor and out door unit including connection of refrigerant tube, insulation of refrigerant tube with suitable material as specified, drain out pipe with extension by PVC pipe as required length including making good disturbed surface of wall for indoor/out door complete with cordless remote control and with in built air ionizer and plazma filter for better indoor air quality with minimum 5 star rating and EER 3.2 at place complete all as specified and as directed. Make: Bluestar/ Voltas/ Hitachi
S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type& designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed .
Excavation in trenches in soft or loose soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out complete all as specified and directed. Notes : (i) Payment for excavation shall be made for one time in case the new cable is laid in the same trenches .
Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing surplus excavated soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.
M&L Brick protection with sub class "B" bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable complete all as specified and directed specified .
Sand cushioning in trenches and well ramming in layers with 8 cm below and 15 cm above the cable with fine dry sand for cable protection and complete all as specified and directed. Note: 18 cm punned thickness shall be measured for payment purpose.
Supply and fixing of GI tubinng light grade size of 40 mm dia for earthing strip protection with all connnected fittings as specified and directed.
Supply and lay jointing and testing and commissioning of 25 Sqmm x 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
All as per Sl item No 158 above but 50 sqmm, 3.5 core
All as per Sl item No 158 above but 240 sqmm, 3.5 core
Supply, fabricating, installing, testing, commissioning and electrically connected Factory (CPRI approved) made, LT panel Board of approved size as recommended by IS & CPRI norms, (0.8X1.2X0.5 Mtr approx.) Outdoor type, Floor Mounted 1100 Volts, made out of CRCA sheet 3.0mm mm thick for load bearing, fully compartmentalised, with IP-65 Protection with base Legs of 5mm thick angle (600mm long), for 415 volts, 3 phase, 4 wire AC supply, complete all as specified including provision of following accessory/ components housed in it :- (i) (i) 400 Amp rated Al bus bar with colour code TPN mounted on epoxy insulators : 01 set (set of 04 bus bars). (iii) LED indicating lamp (set of three)- 01 set (iv) Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of Suitable size. cable as per colour coding or Suitable Size of bus bar for all connections with suitable lugs as required and as specified. (v) Earthing terminals and cable glands. (vi) Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door. Auto Phase sequence changer Panel (i) MCCB conforming to IS 13947 (part-II), IEC-947, 4 pole, 400 Amp, 415 volts, 50 Hz ruputuring capacity 36 KA with adjustable thermal and adjustable magnetic setting - 02 Nos (as incomer + outgoing) (ii) 400A A.T.S 4P-1 No (iii) Aux Contactor220V-2 Nos (iv) On Delay timers-4 Nos (v) Phase Correction Relay-1 No Input & Output Termination On Aluminium Strips. Panel Should automatically transfer the phase sequence.
M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6.3mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level connected to and including GI wire of size 4 mm by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.00 kg/Sqm with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc complete all asspecified and directed. Note: (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead.
M&L for earthing complete with copper earth plate 60 cm X 60 cm X 3.15 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to copper earth strip 20 X3 mm upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of copper and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade including protection pipe GI medium grade 40mm bore , wire mesh, funnel,lugs, salt, charcoal dust, excavation and refilling pit chamber with PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates , RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates pit cover slab 50 mm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways including necessary form work all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion including taking down of existing earthing as exists on site complete all as specified and as directed. Note:-Notes :-- (i) Any increase in length of earth strip and protection pipe of earth strip beyond 7.5 mtr length shall be measured and paid separetely.(ii) On testing if the earth resistance is not obtained i.e beloq 1 ohm , earthing will be generated at NO extra cost ,till the desired earth resistance is obtained.(iii) The chamber shall be constructed atleast 0.5 mtr away from the earth electrode.
S&F offlaod change over switch 400 Amps 4 pole 415 Volts with sheet steel enclouser including making connections of both input and output cables end termination in chang over complete all as specified and directed by Engr-in-Charge.
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to galvanized iron strip 32x6mm (up to 7.5m in length from earth plate) by means of bolts and nuts, check nuts and washers of galvanized iron or steel all as specified and shown in electrical plate No 3 of SSR Part 1 including charcoal, rock salt, necessary excavation and earth work in any type of soil, PCC 1:3:6 type C1(using 20mm graded stone aggregates), chamber with RCC 1:2:4 type B1, 40mm thick cover with MS bar 8mm dia 150mm c/c reinforcement, watering funnel, GI pipe 40 mm dia light grade for protection of earth electrod GI pipe. 20 mm dia medium grade for watering and testing complete all as specified and directed .
CHOUDHARY ENTERPRISES
S K BANSAL AND CO.
m/s k.k. construction co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .