REPAIR AND PAINTING OF STEEL FURNITURE UNDER GE GUWAHATI

Amount

REPAIR TO ALMIRAH LARGE STEEL (DRG NO FD 351/1031)

M&L for removing dents and bends and welding wherever required for Almirah Large Steel,Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray,Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah large steel complete(inside and outside) with a coat of synthetic enamel paint as approved complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed Note :- Almirah as a whole shall be measured as one unit.

S&F in repair, locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key complete all as specified and as directed.

S&F in repair, 3 way locking device with new one best quality as approved complete all as specified and as directed.

M&L for removing old /unserviceable legs and S & F of new Legs made out of 1.5 mm PBI sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces complete all as specified and as directed.

S&F in repair, of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer complete all as specified and as directed.

REPAIR TO ALMIRAH MEDIUM STEEL (DRG NO FD 243/1032)

M&L for removing dents and bends and welding wherever required for Almirah Medium Steel,Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah Medium steel complete(inside and outside) with a coat of synthetic enamel paint as approved complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed Note :- Almirah as a whole shall be measured as one unit.

S&F in repair, locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key complete all as specified and as directed.

S&F in repair, 3 way locking device with new one best quality as approved complete all as specified and as directed.

M&L for removing old /unserviceable legs and S & F of new Legs made out of 1.5 mm PBI sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces complete all as specified and as directed.

S&F in repair, of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer complete all as specified and as directed.

REPAIR TO LOCKER STEEL (DRG NO FD 257/1029)

M&L for removing dents and bends and welding wherever required for Locker Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Locker steel complete(inside and outside) with a coat of synthetic enamel paint as approved complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed Note :- Locker as a whole shall be measured as one unit.

S&F in repair, Hasp and staple chromium plated 100 mm long complete all as specified and as directed.

S&F in repair, of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer complete all as specified and as directed.

S&F in repair, conduit pipe of same size ie Chromium plated steel conduit pipe of 19 mm dia with 1.60mm wall thickness alongwith bracket complete all as specified and as directed.

REPAIR TO TABLE OFFICE CLERK (DRG NO FD 381/1004)

M&L for removing dents and bends and welding wherever required for Table office clerk Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete(inside and outside) with a coat of synthetic enamel paint as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed Note :- Table as a whole shall be measured as one unit.

S&F in repair, brass locks with duplicate keys best quality, suitable for Table office clerk Steel complete all as specified and as directed.

Removing old unserviceable Top and S&F of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

REPAIR TO TABLE OFFICE OFFICER STEEL (DRG NO FD 84 (M) /1003 /1002)

M&L for removing dents and bends and welding wherever required for Table office officer Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office Officer steel complete(inside and outside) with a coat of synthetic enamel paint as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoescomplete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit.

S&F in repair, brass locks with duplicate keys best quality, suitable for Table office Officer Steel complete all as specified and as directed.

Removing old unserviceable Top and S&F of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

REPAIR TO CHARPOY GI PIPE (Drg No. FD-220)

Removing the existing unserviceable plytop and S& F of new 12 mm thick BWR plywood exterior grade quality including flush headed bolts and nuts with washers for fixing plywood to charpoy and spot welding wherever required, Plywood edges to be smoothened and corners rounded complete as specified and as directed Note:- Tightening of existing frame included in this item before replacing of plywood.

S&F in repair, long rail made up of 32mm bore, medium grade GI pipe including, threading, tightening of joints complete all as specified and as directed.

Labour only for Short Rail, (GI pipe retrived from replacement of long rail) including necessary threading, tightening of joints complete all as specified and as directed.

Labour only for Legs, (GI pipe retrived from replacement of Short rail) including necessary threading, tightening of joints complete all as specified and as directed.

S&F in repair, 3 way, 32mm bore GI Elbow, heavy duty complete all as specified and as directed.

S&F in repair, 32mm bore GI Check Nut, complete all as specified and as directed.

REPAIR TO CHARPOY WITH HARD TOP FD/MAP II/01

Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required (legs/rails) and applying two coats of synthetic enamel paint black colour to match as per standard drawing including removing existing rubber shoes and providing new Hard rubber shoes ( 4 Nos) for each charpoy complete as specified and as directed

Removing of old/unserviceable Ply top from Charpoy MS Sqr Tube & S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers complete as specified and as directed

REPAIR TO HOT FOOD TROLLY S/S ELECT DRG NO TP/KALRA

M&L for removing old unserviceable stainless steel body and S & F of new stainless steel 1.00 mm thick ISI marked of standard quality for Hot Food Trolley S/S Elect as specified in drawing and as directed

M&L for removing old unserviceable base revolving wheels /casters and providing of new base revolving collapsible rubber wheels for Hot Food Trolly S/S Elect and as specified on drawing and as directed

M&L for removing of old unserviceable doors & racks and providing of new doors & racks made out of 1 mm thick stainless steel of standard quality ISI marked & movable refrigerator type racks as specified on drawing and as directed

M&L for removing of old unserviceable bowl cover and providing of new bowl cover made of stainless steel of standard quality ISI marked and as specified on drawing and directed

M&L for removing old/unserviceable electrical fittings and S&F of new fittings (Thermostat, Indicator Lamp, 3 Pin Top 15 Amp, Heating element and point wiring with multi stranded copper conductor cable in PVC casing and capping including PVC insulated cable and others) and fixing with the same with screws nuts and bolts as shown on drawing and as directed

S&F in repair, Gate valve(Brass) and GI Waste Pipe as per existing size and shape as specified in drawing and as directed

REPAIR TO BED HARD STEEL (FD/E6/MAP/08)

Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required (legs/rails) and applying two coats of synthetic enamel paint black colour to match as per complete all as shown on drawing and as specified and directed

Removing of old/unserviceable Ply top from Bed Hard Steel and S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers including S& F of new hard rubber shoes ( 4 Nos ) for each bed after removing the existing ones and as specified and directed

REPAIR TO CHAIR WRITING (FD/E6/MAP/12)

M&L for removing the old unserviceable back of Chair Writing and S&F of new back of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50mm thick with PVC lipping all around along with welding of metalic rail where ever required and shall be fixed to the rail with screws as specified and shown on drawing and as directed

M&L for removing the old unserviceable Seat of Chair Writing & S&F of new Seat of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50mm thick with PVC lipping all around along with welding of metalic rail where ever required and shall be fixed to the rail with screws as specified and shown on drawing and as directed

M&L for removing the old unserviceable Handles / Arm rest of Chair Writing & S&F of new Handles of same size shape made of black integral skin polyurethane reinforced with MS insert as specified and shown on drawing and as directed

REPAIR TO CHAIR VERANDAH (FD -19 M/ FD-359)

Re-canning of chair verandah after removing the existing cane and to carry out necessary welding and repairs wherever required and painted with two coats of synthetic enamel paint over a coat of primer and weaving with new white plastic cane of approved quality with 3.5 to 4mm wide half round type for seat and back and fixing 04 Nos of hard rubber shoe/PVC shoes for legs of 20 mm dia after removal of old existing /unserviceable shoes complete all as shown on drawing and as specified and directed Note:- Cane shall be of plastic strips of superior quality ,type -I HDPE white or cream colour of uniform width conforming to IS-5387

REPAIR TO BOOK CASE STEEL LARGE (FD-1028)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Case Steel Large complete all as specified and directed

S&F of new 5 mm thick glass and fitting with 1 mm MS sheet channel with roller for sliding doors including removing unserviceable/broken existing glass complete all as specified and directed

S&F in repair, 100 mm steel chromium plated handle complete as specified and shown on drawing and as directed

REPAIR TO TEAPOY VARANDAH (FD-255)

Removing old unserviceable Top and providing of new top made out of pre laminated particle board 18 mm exterior grade ISI marked teak face and PVC edging all around complete as specified and shown on drawing and as directed

M&L for removing existing paint and preparing the surface after applying putty and a coat of primer and Painting of Teapoy verandah with two coats of synthetic enamel paint (1st grade quality) white colour with glossy finish by spray machine and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete as specified and shown on drawing and as directed

REPAIR OF BOOK SHELF OPEN LARGE STEEL FD-69 (M)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Shelf Open Large complete as specified and directed.

REPAIR OF BOOK SHELF OPEN SMALL STEEL FD-69 (M)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Shelf Open Small complete as specified and directed.

REPAIR TO RACK STEEL SIX TIERS FD-1038

M&L for removing dents and bends and existing paint and preparing surface by applying putty and a coat of red primer and applying a coat of Synthetic Enamel paint of Olive Green colour or any other colour as specified and as directed

REPAIR TO TRESTLE STORE STEEL FD-1043

M&L for removing dents and bends and existing paint ,preparing surface by applying putty and a coat of red primer and applying a coat of Synthetic Enamel paint (tint as drected) completeall as specified and as directed

REPAIR TO TABLE STEEL 900X600X760 WITH & WITHOUT DRAWER FD-1007/HFD 2014/FD 1008

M&L for removing dents and bends and welding wherever required for Table withour drawer Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete(inside and outside) with a coat of synthetic enamel paint as approved as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed

Removing old unserviceable Top and providing of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

S&F in repair, brass locks with duplicate keys best quality, suitable for Table Steel complete all as specified and as directed.

M.G. ENTERPRISE

D.B ENTERPRISE