Nit No. 18 Item No. 01

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil

Providing and laying 75mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with Yamuna sand including finishing smooth etc. complete as per direction of Divisional In-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement, concrete in position to the required line, level and curvature , jointed with cement mortar 1:3 (1 cement: 3 coarse sand ) including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5mm ) including making drainage opening wherever required complete etc. as per direction of Divisional In-charge (length of finished kerb edging shall be measured for payment). (Precast C.C kerb stone shall be approved by Divisional In-charge.

Providing and laying factory made chamfered edge cement concrete paver block in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU muuld, laid in required colour & pattern over 50 mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of pave blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer’s specification & Engineer in charge.16.91.1 60 mm thick cement concrete paver of M-35 grade with approved colour, design & pattern.