Dismantling the damaged pedestals and providing encasing concrete to the structural steel columns in Mill area to the East of bottom ash hopper up to Mill Bay in Unit 5 area

Dismantling the existing damaged RCC for the required width & depth as per the instruction of Engineer in charge and disposing the debris 1 Km. away from the site including cost of all materials, labours, lead, lift, curing, etc. complete.

Labour charges for cutting, welding, fabrication & laying in position of the MS Plates using scrap including cost of labour charges, cutting, fabrication charges, lead, lift, etc., complete. (M.S Scrap will be supplied by Dept. at free of cost).

Providing shuttering using steel structures including cost of all materials, labours, lead, lift, etc. complete.

Supplying fabricating and fixing in position of RTS rod for reinforcement including cutting bending tying and fixing in position including cost of all materials, labour, binding wire, lead, lift etc., complete.

Providing RCC 1:1.5:3 using OP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Providing PCC 1:1.5:3 screed concrete for floor using OP cement with 12mm chips for 50mm thickness machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete

Supplying and providing Nito floor hard top over the existing PCC concrete surface of 5Kg/sqm and rubbed smooth with power float over the base concrete including cost of all materials, labour, lead, lift, etc. complete.

Providing two coats of anticorrosive black paint to the newly plastered surface over a one coat of white cement primer including cost of all materials, labour, lead, lift, etc., complete.

Painting two coats with ready mixed enamel paint for the old steel surface over a coat of including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete.

KAMATCHI INDUSTRIAL SERVICE (BID ID -1082356)