8384 REPAIR / REPLACEMENT OF SEWERAGE LINE, MANHOLES, COMPLAINTS OF HOSPITAL BLDG, OTM AND MD ACCN UNDER AGE BR-III SOUTH PUNE

Amount

M&L for Cleaning and rodding of blocked sewer lines, of any depth and any type and any dia of sewer line (ie branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as rodding of sewer line between successive manholes mannually or pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap upto final drop/outlet complete all as specified and directed by Engineer-in-charge.

Cleaning & clearing of underground sewage line of any dia (including manholes by taking off manholes covers and re-fixing the same after cleaning) of any description, underground any depth by removing any type of blockage including de-silting and de-chocking with combined high pressure water jetting cum suction (vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water thermoplastic fiber brailed water jetting hose and through conical/round shape nozzler pipe and flushing after cleaning including clearing of manholes (Sludge/sludge water shall be disposed off at authorised dumping site declared by local administration outside MD land as directed by Engineer-in-Charge (Note : Contractor shall bring the high pressure water jetting cum suntion type machine mounted on LCV/HCV with in 48 Hrs after requirement has been notified by the Engr-in-Charge in the site order book.)

Cleaning of sewage system on day to day basis including blocked WCs, blocked WHB outlet, Bottle traps, Nahani traps, floor traps, Gully traps, soil/waste pipe running on external walls of building including junctions in running/flowing condition witout disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off the sludge/waste materials out side Defence land by deploying 02 (TWO) safaiwala per day complete all as specified and directed by Engineer-in-charge. (Note :- (i) Complaint shall be completed on same day (handed over till 1700 Hrs) (ii) If safaiwala not attended complaint within time frame mentioned above, 50% shall be deducted from job completed by him per day (iii) The contractor shall be responsible to maintain daily job completed by the safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days for the New Command Hospital (SC) complex.)

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in in hard/dense soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in soft/disintegrated rocks complete all as specified and as directed.

Excavation in trenches exc 1.5 & not exc 3mtr in depth for foundation and getting out in hard/dense soil complete all as specified and as directed.

Demolition and breaking up RCC, SWG, CPVC drain pipes set in cement mortar for the following sizes and removing debris from the site for the following complete all as directed by Engr-in-Charge :-

150 mm bore

200 mm bore

250mm bore

300 mm bore

M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for for following sizes :-.

150mm bore RCC hume pipe.

200mm bore RCC hume pipe.

250mm bore RCC hume pipe.

300mm bore RCC hume pipe.

M&L for RCC pipes class NP-2 with laid and jointed with collars of following sizes :- (Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same shall be deemed to be included in quoted unit rates)

150mm bore

200mm bore

250mm bore

300mm bore

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed.

Removing the excavated materials exceeding 50mtr but n.exc 250 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.

Cleaning of manholes of any size and of any depth by taking out semi solid/solid sludge complete and removing sludge in covered vehicle out of MOD land complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, for the following internal dia of pipe :-

150mm bore

200 mm bore

250 mm bore

300 mm bore

S&F in repairs cast iron floor/Nahani trap with grating 100mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M & L for 300x300mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:6) etc complete all as specified and directed

M&L for matt finished coloured ceramic tiles 7 to 8mm thick joint free, 400x400mm size of approved colour, set jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in CM (1:6) etc complete as in flooring all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M & L for 200x300mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

S&F for GI tubing 15mm dia medium grade with all fittings & fixtures, fixed complete to walls & ceiling or laid in floors in repairs including taking down complete all as specified and as directed

S&F for GI tubing 20 mm dia medium grade with all fitting & fixed complete to wall & Ceiling or laid in floor in repair including taking down complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. including cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and not exc 20cm girth complete all as specified and as directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F in repair Grating doom with waste hole125 mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed

S & F vitreous china wash hand basin, white flat back of size 550x400mm including 15mm dia CP pillar tap, PVC waste coupling 32mm, chain and plug and PVC waste pipe, PVC connection 45cm long including CI brackets/fixing with fasteners etc complete in repairs all as specified and directed by Engr-in-Charge.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S & F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L for Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

S&F brass CP Hand Shower (Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed.

S&F in repairs PVC waste pipe 32/40mm dia 610mm long suitable for WHB or Sinks etc complete all as specified and directed.

S&F in repairs collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runnners brass handles etc complete, errected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for PCC (1:4:8) type D-2 (Using 40mm size stone aggregate) as in foundations, filling in mass concrete etc. complete all as specified and directed

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in surface channels and drains and benching of manholes incl all moulds and forms complete all as specified and directed.

Extra for forming fair finished drain or channels 30 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed

M&L for PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in coping, kerbs, bed blocks etc including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of 75mm thick, laid in alternate bays as in path and plinth protection including finishing the surfaces even and smooth using extra cement. complete all as specified and directed

Demolition of reinforced cement concrete of any description & in any position slab complete all as specified and as directed.

M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate in Manholes covers set in CM 1:4 complete all as specified and directed

S&F MS TMT bars upto 10mm dia cut to length, bent to shape required including cranking, bending , binding, hooking ends abd binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

Demolition of brick/block/stone masonry, built in cement mortar complete all as specified and directed complete all as specified and as directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) 20mm gde aggregate and setting in CM 1:6 complete all as specified and as directed

Taking down cement plaster on brick/block walling, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC @ 3% by weight of cement, complete all as specified and as directed by Engr-in-Charge. (Note :- WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling of drain pipes AC /CI/PVC/CPVC pipes of various dia jointed in CM or adhesive 75 to 150mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 110 mm bore complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 75 mm bore complete all as specified and as directed.

Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 110mm bore complete all as specified and directed

Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 75mm bore complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 150 mm bore complete all as specified and directed

Refixing of CPVC pipes & fittings on walls/ceiling or laying in floors 150mm bore complete all as specified and as directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbow & bend etc fixed to wall or in floors etc complete all as specified and directed.

S&F PVC (SWR) bends plain 110 mm bore complete all as specified and as directed.

S&F PVC(SWR) bends plain 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and directed

S&F PVC (SWR) bends any radius 75 mm bore provided with access door complete all as specified and directed

S&F PVC SWR branch piece , (single 'Y') equal or unequal of 110 mm bore provided with access door complete all as specified and directed

S&F PVC SWR branch piece , (single 'Y') equal or unequal of 75 mm bore provided with access door complete all as specified and directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F in repair CI Hubless pipe of dia 150 mm fixed to walls with necessary fittings and clamps complete all as specified and as directed.

S&F in repairs CI hubless dia reducer tee (single branch plain Tee) 150x150x100mm complete all as specified and as directed.

S&F in repairs only SS shielded coupling 150mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 150 mm bore complete all as specified and as directed.

S&F in repair CI Hubless pipe of dia 100 mm bore fixed to walls with necessary fittings and clamps complete all as specified and as directed.

S&F in repairs hubless dia reducer tee (single branch plain T) 100x10x100mm complete all as specified and as directed.

S&F in repairs SS shielded coupling 100mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 100 mm bore complete all as specified and as directed.

S&F in repairs CI hubless 150x100 mm bore Dimminishing pieces (Reducer) complete all as specified and as directed.

Taking down chowkats or frames with shutters not exc. 1.5 sqm (without taking off shutters from the frame) and removed to store complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 149 of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S & F 100 mm long butt hinges medium weight, cold rolled Mild steel for door shutters complete all as specified and as directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.

S & F in repair 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

S & F in repair 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

Dismantling stone slab/tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, apron etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for precast cement concrete interlocking paver blocks, coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade, laid over & including 50mm thick stone dust/grit all as specified and as directed complete all as specified and directed .

M&L for precast factory made manhole cover with frame of medium duty, of size Square / rectangular / circular area of each cover exc. 0.35 Sqm and n.exc. 0.75 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground. complete all as specified and directed

Dismantling of wrought or MS work of any description etc complete all as specified and as directed.

Dismantling fencing wire mesh and barbed wire any type etc complete.

Supply only chain link MS galvanised fencing any size or type as directed by Engr-in-charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply & Fixing MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply & Fixing MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Removing of caked mud/ black soil/ STP waste materials out of MD land to a place earmarked by civil authorities including loading, unloading and stacking at the destination complete all as specified and as directed. (Note :- The contractor shall be responsible to liase with civil authorities for permission of disposal and should maintain necessary safety precaution during loading and unloading)

TULSAYA CONSTRUCTION

REKHA ELECTRICALS

Takshashila electricals

Gauri Associates

shiva traders

M/S P D TUPE

M/s.BAJRANG CONSTRUCTION