ADDITION/ALTERATION AND CERTAIN MISC WORKS TO BLDG NO. P 204 TO P 206 P 280 AND P 281 05 BLOCKS OF OMS COMPLEX AND CONVERSION OF 74 ONE BHK HOUSES TO TWO BHK HOUSES AT GIRINAGAR ESTATE PUNE

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing from site all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Demolition of Reinforced Cement Concrete like Roofs, beams (other than ground floors) beams, staircases, landings, chajjas and similar suspended work not exceeding 15cm thick and removing rubbish complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for as in kitchen platforms complete all as specified and as directed

Taking down door/window chowkhat with shutter [without taking off shutter from the frame] not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down door chowkhat with shutter [without taking off shutter from the frame] exceeding 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for Forming jambs to opening including cutting toothing and properly bonding into old work including facing and pointing (if necessary) to match existing work complete in CM 1:4 complete all as specified and directed.

M & L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M & L for rendering to fair faces of brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster on brick masonry or concrete surface in two layers, base layer 10mm thick in CM (1:4) and top layer 5mm thick in CM (1:4) mixed with Recron 3s @125grams per bag of cement, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note: Recron 3s shall be measured and paid seperatly as supply only

M&L for rendering 20mm thick cement plaster on brick masonry surface in two layers, base layer 15mm thick in CM (1:6) and top layer 5mm thick in CM (1:4) mixed with WPC as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note: WPC shall be measured and paid seperatly as supply only

M&L complete removal of existing treatment on wall surfaces (Internal) and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer complete all as specified and directed

M & L for preparation of newly plastered Wall surfaces and applying two coats of Acrylic Washable Distemper (Ist quality)over one coat of alkali resistant primer on Wall surfaces complete all as specified and as directed.

M&L complete removal of existing treatment on ceiling surfaces and applying two coats of Acrylic Washable Distemper (Ist quality) over a coat of alkali resistant primer complete all as specified and directed

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance exterior paint of required shed (Company Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Lit/sqm over new/old surfaces including complete removal of existing paint by bio wash, necessary scaffolding required for painting work, safety measures etc complete all as specified and directed

M&L Preparation of wall surfaces (Internal) and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces

M&L Preparation of wall surfaces (External) and applying two or more coats of water proof Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces

S & F factory made pressed steel frame made out of mild steel black sheet of 1.25 mm thick of profile 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock strike plate etc. Complete including one shop coat of priming and threshold of 12mm dia round bar 1 nos welded at bottom of frame all as specified and directed.

S & F factory made pressed steel frame made out of mild steel black sheet of 1.25 mm thick of profile 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock strike plate etc. Complete including one shop coat of priming and threshold of 12mm dia round bar 1 nos welded at bottom of frame all as specified and directed.

M&L for PCC 1:2:4 type B1 (20mm Graded stone aggregate) as in filling in frame and bed block for fixing of holdfast fo door frame complete all as specified and directed.

S & F 2nd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc.edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; size of members of shutters as specified in SSR Part I Sectin 8, clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

M & L for 30mm thick Flush door solid core construction with veneer faced, black board core and ply wood face panels commercial type on both sides and both the faces are covered with decorative face veneer with lipping/frame to match . Bonding shall be with formaldehyde glue to ensure stronger bonding and longer life of door complete all as specified and as directed.

S & F Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new decorated steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and as directed.

S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed

M&L for Cupboard magnet including high quality magnet and steel plate. complete all as specified and as directed.

S&F in repairs 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed

S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S&F 125mm cupboard handles fixed with nuts screws and washer of aluminium anodised complete all as specified and directed.

S&F Hasp and staples safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed by Engr-in-charge.

S & F 100mm long Butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F brass sliding door bolts with sand or die cast brass hasp and staple (Bolt Type) and fixing bolt with rolled or drawin brass bolt and fixed length of bolt 250mm complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 250 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F"Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S & F Brass handles, polished type of size 150mm long complete all as specified and as directed.

S&F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F Powder Coated Aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, partitions with one or more rebates including jointing cleat, rubber beading for fixing, locking arrangement etc complete all as specified and as directed.

S & F Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in Window and Ventilator Shutters, Sliding Type, without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as peg stays 150mm [1 No], hinges type B-21 100mm long[2 nos] Suitable Handle [1 No] per Shutter complete all as specified and as directed. Note: [a] Supply only panel inserts such as Glass / Gauge / Grills will be measured and paid separately. [b] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles,Peg stays, Hinges etc.

S&F MS Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Stainless Steel fancy type curtain rod 25mm bore complete all as specified and as directed.

S & F Stainless Steel brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

M & L for 3 mm thick tinted glass ordinary quality in square not exceeding 0.50 Sq.m each pane glazing with oil putty but frosted on one side complete all as specified and as directed.

M & L for 25mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in sub base or levelling course complete all as specified and directed.

M&L for Coloured Non Skid Joint less ceramic tiles of grade B II a / B II b of 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed complete

M&L Coloured glazed ceramic tiles of grade B III size 350mmx250mmx7mm or 450mm x 300mm x 7mm thick as in verticle surfaces like dado/skirting etc. set and jointed in neat cement slurry and pointed in epoxy grout to match, including 10mm thick backing coat in cement mortar 1:4 including triangular filleting on top in CM 1:4 complete all as specified and directed

M & L for Vitrified Tiles, Double Charged, coloured, First Quality, area of each tile exceeding 0.36 Sqm and not exceeding 0.42 Sqm, 9 to 10 mm thick as in Floors, set and jointed in neat cement slurry and pointed in white after roughening the existing concrete surface or coloured cement to match including 20mm thick screed bed in cement motor 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Vitrified Tiles, Double Charged, coloured tiles and matching with adjacent floor tile, First Quality, area of each tile not exceeding 0.36 Sqm, 9 to 10 mm thick as in skirting , set and jointed in neat cement slurry and pointed in epoxy grout to match including platring with 10 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M&L for mirror polished Kota stone slab 20-25mm thick in Tread of steps in single pieces incl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) complete all as specified and directed

M&L for mirror polished Kota stone slab 20-25mm thick in riser or skirting of steps in single pieces laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) complete all as specified and directed

M&L Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:6 complete all as specified and directed.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed..

M & L for Granite stone slabs of 18 to 20 mm thick as in jambs, pillars, window cills, cooking platform, treads of steps etc including making holes and rounding exposed edges, with machine cut edges, rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of any colour / shade, design / pattern as directed, set and bedded with grey cement [slurry] and jointed and pointed with white cement slurry mixed with a admixture of pigment to match shade of granite slabs including screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1:4 complete all as specified and as directed.

S & F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

S&F 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed including taking down the unserviceable GI pipe complete to walls, ceilings or in floors etc complete all as specified and directed

S&F 20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed including taking down the unserviceable GI pipe complete to walls, ceilings or in floors etc complete all as specified and directed

S & F in repairs PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts. complete all as specified and directed

S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including flushing cistern, flush pipe and plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap and connection to trap complete including making good the distrubed surface all as specified and as directed.

S & F in repairs Vitreous china wash hand basin, white, flat back of size 550 x 400mm including PVC waste pipe 32mm dia,CP brass waste coupling 32mm dia etc, 15mm bore CP fancy type pillar tap including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed

S&F PVC (SWR) floor trap 75mm dia out let with grating including jointing with solvant cement complete all as directed.

S&F Stainless steel grating with ring 100mm dia complete all as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting n.exc. 10cm girth complete all as specified and as directed.

S&F in repairs stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of for unions of bore 15mm complete all as specified.but fancy type, chromium plated complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm inlcluding 40mm waste coupling and waste pipe complete all as specified and as directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repairs Bib taps, fancy type, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed

S&F 15 mm bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron pipe and fixed etc. complete all as specified.

S&F brass 15mm dia CP hand shower (health faucet) with 1.2 m long flexible tube and wall hook complete all as specified and directed

S&F in repairs brass Chromium plated fancy type Toilet paper holder of fixed to walls with chromium plated (CP) brass screws all as specified and directed

S&F in repair brass Chromium plated fancy type Soap dish fixed to wall with Chromium plated brass screws all as specified and directed

S&F in repair brass Chromium plated fancy type 600mm long cloth trey with towel rod with hook fixed to wall with Chromium plated brass screws

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

Dismantling cast iron work of any description

Dismantling PVC pipe of any dia and at any location, height etc all as specified and directed.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, GI clamps as in rain water down pipes complete all as specified and as directed.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, GI clamps as in rain water down pipes complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as directed.

S & F 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement with trap door complete all as specified and as directed.

S &F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm Bore including jointing with solvent cement complete all as specified and as directed.

S &F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm Bore including jointing with solvent cement complete all as specified and as directed.

S &F PVC (SWR) branch piece, double (Double Y) equal or unequal 75mm Bore including jointing with solvent cement complete all as specified and as directed.

S & F PVC (SWR) vent cowls 110mm bore complete all as directed.

S & F PVC (SWR) vent cowls 75mm bore complete all as directed.

S & F PVC (SWR) gully trap125/110mm including jointing with solvent cement complete all as directed.

S & F in repairs Gun Metal Globe or Gate Valve, 20 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.

S & F Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 20mm - 210 Grams] etc complete all as specified and as directed

Dismantling water tanks exc 500 but not exceeding 1000 lts capacity including disconnecting water supply pipes and removing from to store all as specified

S&F PVC water storage tank 1000 Litrs capacity ISI marked rotational moulded double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. Including 20mm dia Tank Nipple suitable for PVC water tank

M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed by Engr-in-Charge.

Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with approved water proofing compound @ 3% weight of cement and apply two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor.

Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement duly mixed with water proofing compound @ 3% weight of cement over concrete surfaces complete all as specified and as directed. (Note :- WPC shall be measured and paid seperately)

Supply only integral water proofing compound

Supply only Recron 3s Polyester and polypropelene construction fibre, Grade 'A'

M&L for Cement concrete tiles 25cmX25cmX22mm Thick machine pressed set jointed and pointed in neat cement slurry in floors and cut and poilshed with grey cement and no pigment over 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, lintels and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

M & L for RCC Nominal mix 1:2:4 Type B1 using 20mm graded stone aggregate as in beams, bands, cantilevers, lintels over 1.5M span complete all as specified and directed.

M & L for RCC Nominal mix 1:2:4 Type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc., complete all as specified and directed.

S & F Reinforcement using High Strength Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F Reinforcement using High Strength Deformed TMT Bars of Grade Fe–500D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for plates (plain or chequred ) channels, square cut or notched (ordinary and counter sunk ) forming holes ,Fe -410 ( Gde- E-250 quality -A) with riveted ,bolted or welded attachment complete all as specified and as directed.

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

S & F for pre-painted Galvalume zinc coating GI based corrugated steel coloured sheets of Trapezoidal profile having pitch 190mm, depth 29mm and thickness 0.50mm base metal tickness[Galvalume base-PPGL trapezoidal profile sheets], having tensile strength of 550 Mpa, fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size in roof covering or wall cladding complete all as specified and as directed. Note: 1. Overlap shall be provided as specified by the manufacturer.

M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc. surface finished even and smooth with out using extra cement complete all as specified and as directed.

S & F for Modular kitchen cabinet and wall cabinet comprising of with including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of 18mm thick glossy/Matt Finish solid waterproof MDF board and outer door and topside shall be of 18mm thick perlam coloured solid MDF board, for fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F 12 mm thick glossy/Matt Finish solid waterproof MDF board for kitchen wall cabinet back side and etc comprising of with including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to walls minimum screws size 120 mm complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern Bottle Rack size 8" wide and 20" deep including stainless steel channels of make hettich, godrej or hafale.Dia of stainless steel bar used to make grill pattern shall be min 5mm fixing the items fitted in position and complete all as specified directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich or equivalent as approved.

S & F for stainless steel grill pattern basket of size 21"x4"x20" deep including stainless steel drawer channels of make hettich, godrej or hafale . Dia of stainless steel bar used to make grill pattern shall be min 5mm.Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern basket of size 21"x6"x20" deep including stainless steel drawer channels of make hettich, godrej or hafale. Dia of stainless steel bar used to make grill pattern shall be min 5mm.Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern basket of size 21"x8"x20" deep with including stainless steel drawer channels of make hettich, godrej or hafale. Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel Cuttlery Box of size 21"x4"x20" deep with including stainless steel drawer channels of make hettich, godrej hafale or equivalent as approved. Thickness of stainless steel sheet shall be 1mm thick. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern Grain Trolley with base of size 21"x24"x20"deep with including stainless steel channels of make Hafele, Godrej or hettich. Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern Plate rack of size 21"x8"x20" deep with including stainless steel channels of make Hafele, Godrej, Hettich .Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern Cup and Soucer Rack of size 21"x6"x20" deep with including stainless steel channels of make Godrej, Hettich or Hafale. Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110 degree fixed, with screw all as specified and directed. Make: Kea SCH or Hettich.

S&F 100 mm long cupboard stainless steel handles fixed with nuts screws and washer of complete all as specified and directed.

M&L for Cupboard magnet of size 50mm including high quality magnet and steel plate of complete all as specified and directed.

M&L for stainless steel frame work for fixing of modular kitchen below kitchen platform including necessary welding, fixing in true level and position as per availability of size below kitchen platform complete all as specified and directed by Engg-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface and consolidated to required gradient and camber complete all as specified.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete coloured, glossy finish paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed ;

M&L For cement concrete Type B1 (1:2:4) using 20mm graded stone aggregate as in kerb or mud stop rounded or champhered on edge complete all as specified and directed

Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified.

All as per item No. 141 here-in-above but for one light point controlled by 2 way switch

All as per Item No. 141 here-in-before, but for one 3 pin, 6 Amps switch socket outlet point on independent board, complete all as specified and directed.

All as per Item No. 141 here-in-before, but for one 3 pin, 6 Amps switch socket outlet point on same board complete all as specified and directed.

All as per Item No. 141 here- in- above, but for 3/5 pin 16amps socket outlet independently, with 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 and including 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 as earth continuity conductor and connecting to earth dolly complete all as specified and as directed.

S & F Modular switch one way, 6 Amp, one module, (ISI marked), complete all as specified and directed.

S & F Modular switch Two way, 6 Amp, one module, (ISI marked), complete all as specified and directed.

S & F Switch, Modular Type, One Module, Single Pole, One Way, 16 Amps, 230 Volts complete all as specified and as directed.

S & F Socket Outlet, 2/3 pin, 6 Amps and combained Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.

S & F Socket Outlet, 2/3 pin, 6/16 Amps and combained Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.

S & F Ceiling Rose, Surface Bakelite, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed.

S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 100 W, AC, 230 Volts, Single Pole complete all as specified and as directed.

S & Fix lamp holder PVC type with back plate suitable for lamp holder fitting complete all as specified and as directed.

S & Fix Bell push modular type SP 6 Ampscomplete all as specified and as directed.

S & Fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and as directed.

S & F LED Luminaire not less than 22 Watt fitting 4' long with white powder coated housing & frame in CRCA sheet, High efficiency LED grade diffuser, eletronic driver duly wired upto terminal block, CRI>80, LED colour temparature - 5700k, IP20, 50000 burning hours as per L70 criteria, ambient temparature - 0 to 50 Deg C, Driver efficiency >85%, THD<10%, PF>0.95, surge protection in CM-3KV, Multistage isolated constant current, Constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level< 60V DC as per IEC standard including batten/suspension system

S & F Energy efficient Sleek LED Mirror Light Fitting 2feet,10 watts decorative type driver holder and LED lamp with Acrylic / PMMA diffuser for soft glare free light with all accessories internally prewired and including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

S & Fix LED wall mounting fancy Light fitting, 15 watt, 230 volts, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. all as specified & directed.

S & Fix round surface mounting LED 12 W luminaire Integral round shape surface mounting high powder LED luminaire,dome shape opal diffuser complete fitting with all fixing arrangement complete with all as specified and directed by Engr-in-Charge.

Taking down and refixing of Ceiling fan/Exhaust Fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & F PVC Exhaust fan with louvers shutters, heavy duty, single phase suitable for 230volts, 1400 RPM, 50HZ of 250mm sweep complete including provision of 3 core flexible copper cable of suitable size from ceiling rose to fan and fixing arrangement including grouting of bolts in wall, etc complete all as specified and directed.

Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examin & carry out the servicing/overhauling/ Painting the geyser by thoroughly cleaning the tank, thermostat, heating element and testing in all respect for smooth running and refixing complete all as directed.

S & Fix of MCCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.

S&F MCCB 100Amp capacity, FP, 415Volt grade, rupturing capacity 25kA, with adjustable thermal and magnetic setting, including making incoming and outgoing connections using copper thimbles / lugs of appropriate size, complete all as specified.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 16 way , 240 volts, single phase with 100 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCB DB complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 12 way , 240 volts, single phase with 100 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCB DB complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 2 way , 240 volts, single phase with 100 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCB DB complete all as specified and directed.

S&F of MCB SPN 240 Volts, 'C' series, rupturing capacity 10 KA of rating 6 to 32 Amps complete all as specified and as directed.

S&F of MCB SP 240 Volts, 'C' series, rupturing capacity 10 KA of rating 6 to 32 Amps complete all as specified and as directed.

Supply and fix single pole and neutral sheet matel enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp Capacity complete all as specified and directed.

S & F in repairs Telephone Socket / Jack with Shutter, RJ-11, Modular Type, One Module complete all as specified and as directed.

S & F Cover plate with frame for telephone socket RJ-11 (Jac Type), Modular Type, two Module with Pressed Metal Flush Box made out of 2mm thick MS Sheet complete all as specified and as directed.

S & Fix PVC conduit 25 mm size run in wall/ surface for provision for Telephone cable/ TV cable fixed on wall conceled and including dismantling of old pipes,cutting chasis,pinning in and making good to disturbed surfaces etc complete all as directed by Engr-in-Charge.

S & F LED street light 30 W building security light pressure die cast aluminium housing LED street light lumaniries with IP 66 and complete accessories including suitable GI bracket all as specified and directed by Engr-in-charge.

Shifting of electric meter and rewiring to meter pannel board with appropriate size/ length of new copper wire including flexible PVC conduit, shifting of main DB at suitable place, repairing the existing steel pannel board by welding replacing of damage, broken door hinges and repairing damaged door, provision of locking arrangement, replacement of meter reading glasses with and including painting with two coats of synthetic anamel paint of both sides of door complete as directed by Engr-in-Charge

M & L for Sub main wiring with 2 runs of single core 1.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts with colour code , FRLS Grade, ISI Marked, drawn through and including suitable size of PVC casing and capping with its accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 1.5 Sq.mm & one run of PVC casing and capping along with accessories will be measured as one RM.

M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 650/1100 Volts with colour code , FRLS Grade, ISI Marked, drawn through and including PVC Concealed conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of PVC conduit accessories will be measured as one RM

M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC non matallic rigid conduit with accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of PVC conduit with accessories will be measured as one RM.

M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC Concealed conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of PVC conduit accessories will be measured as RM.

M & L for earthing complete with GI earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including GI earth strip of 25x4mm by means of rivetting and brazing and protected by GI pipe light grade of suitable size up to the test point i.e. up to 7.5 mtr, including providing alternate layers up to full volume of pit by charcoal dust and common salt, magnesium sulphate & vegetable soil all around the plate 15 cm depth and width minimum including PCC pit chamber, watering pipe of 50mm dia medium grade GI pipe up to the top of the plate having funnel complete and RCC cover, connecting to the test point and testing on ground complete and including excavation and earth work in any type of strata and cleaning of site all as specified in MES SSR Part-I and directed by Engineer-in-charge.

vishalconstruction

agarwal and company

VIRENDRA FABRICATORS